Package: parted;
Reported by: George Fedorov <gfedorov <at> unimelb.edu.au>
Date: Sat, 3 Aug 2019 15:18:01 UTC
Severity: normal
Done: "Brian C. Lane" <bcl <at> redhat.com>
Bug is archived. No further changes may be made.
Message #8 received at 36908 <at> debbugs.gnu.org (full text, mbox):
From: Volta <xvolta <at> gmail.com> To: George Fedorov <gfedorov <at> unimelb.edu.au> Cc: 36908 <at> debbugs.gnu.org Subject: Re: bug#36908: parted optimal alignment fails minimal alignment check Date: Sat, 3 Aug 2019 12:15:01 -0400
I'm not a parted dev, just a user, but I've run into this same issue several times. This wouldn't happen to be a USB device using the UAS driver? IME setting quirks mode for such devices so they use the usb-storage driver instead yields sensible values for optimal_io_size, etc. so parted can do the right thing with 0% and properly align the partitions. This also works around other issues I've had with these devices randomly disconnecting when using UAS. My /etc/modprobe.d/usbdisks.conf file contains: options usb-storage quirks=0x0bc2:0xab31:u,0x0bc2:0x3322:u,0x0bc2:0xa0a4:u,0x0bc2:0x331a:u,0x0bc2:3343:u get the device identifiers for the affected device(s) from lsusb, stick them in there, then 'depmod -a' and reboot or remove and reattach the device(s) (the latter should work, but sometimes the kernel doesn't do the right thing, and I've not bothered to investigate further as I only use USB disks on workstations that are easily rebooted), then try parted again. Doesn't really "solve" the problem, which I understand to be with the UAS implementation in these devices, but at least it is a usable workaround. On Sat, 3 Aug 2019 at 11:18, George Fedorov <gfedorov <at> unimelb.edu.au> wrote: > > Hi, > > > I was directed here by the page at https://www.gnu.org/software/parted/bugs.shtml ; is there any bugreport tracker where one can file a bug instead ? > > > Anyway, here's the problem ( manifested in parted 3.2 coming with Ubuntu 18.04 and checked vs. a manual build of the sources from http://ftp.gnu.org/gnu/parted/parted-3.2.tar.xz ): > > > === parted version === > > > # parted --version > parted (GNU parted) 3.2 > Copyright (C) 2014 Free Software Foundation, Inc. > License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>. > This is free software: you are free to change and redistribute it. > There is NO WARRANTY, to the extent permitted by law. > > Written by <http://git.debian.org/?p=parted/parted.git;a=blob_plain;f=AUTHORS>. > > === print unit s print unit chs print === > > > # parted /dev/sdi print unit s print unit chs print > Model: WDC WD30 EZRZ-00Z5HB0 (scsi) > Disk /dev/sdi: 3001GB > Sector size (logical/physical): 512B/512B > Partition Table: gpt > Disk Flags: > > Number Start End Size File system Name Flags > > Model: WDC WD30 EZRZ-00Z5HB0 (scsi) > Disk /dev/sdi: 5860533168s > Sector size (logical/physical): 512B/512B > Partition Table: gpt > Disk Flags: > > Number Start End Size File system Name Flags > > Model: WDC WD30 EZRZ-00Z5HB0 (scsi) > Disk /dev/sdi: 364801,80,62 > Sector size (logical/physical): 512B/512B > BIOS cylinder,head,sector geometry: 364801,255,63. Each cylinder is 8225kB. > Partition Table: gpt > Disk Flags: > > Number Start End File system Name Flags > > === the problem === > > > # parted /dev/sdi > GNU Parted 3.2 > Using /dev/sdi > Welcome to GNU Parted! Type 'help' to view a list of commands. > (parted) mkpart test1 0% 1T > (parted) unit B > (parted) print > Model: WDC WD30 EZRZ-00Z5HB0 (scsi) > Disk /dev/sdi: 3000592982016B > Sector size (logical/physical): 512B/512B > Partition Table: gpt > Disk Flags: > > Number Start End Size File system Name Flags > 1 33553920B 1000007477759B 999973923840B test1 > > (parted) align-check optimal 1 > 1 aligned > (parted) align-check minimal 1 > 1 not aligned > (parted) > > > ===== > > > First of all, start sector value looks insanely big for "0%" ; second, one would imagine that passing an optimal check would imply passing a minimal check. > > > If one tries to start at e.g. 1 MiB, then of course the optimal check will not pass : > > > ===== > > # parted /dev/sdi > GNU Parted 3.2 > Using /dev/sdi > Welcome to GNU Parted! Type 'help' to view a list of commands. > (parted) print > Model: WDC WD30 EZRZ-00Z5HB0 (scsi) > Disk /dev/sdi: 3001GB > Sector size (logical/physical): 512B/512B > Partition Table: gpt > Disk Flags: > > Number Start End Size File system Name Flags > > (parted) mkpart test1 ext2 2048s 1T > Warning: The resulting partition is not properly aligned for best performance. > Ignore/Cancel? I > (parted) unit B > (parted) print > Model: WDC WD30 EZRZ-00Z5HB0 (scsi) > Disk /dev/sdi: 3000592982016B > Sector size (logical/physical): 512B/512B > Partition Table: gpt > Disk Flags: > > Number Start End Size File system Name Flags > 1 1048576B 1000000000511B 999998951936B ext2 test1 > > (parted) align-check optimal 1 > 1 not aligned > (parted) align-check minimal 1 > 1 aligned > > ===== > > > As it turns out, the root of all evil comes from here : > > > ===== > > # cat /sys/block/sdi/queue/optimal_io_size > 33553920 > ===== > > So parted is not to blame, but the system. But from the user's point of view, it is quite hard to figure this out. And certainly the user deserves to know the actual values that parted considers to be of best performance -- I mean, pa->offset and pa->grain_size from parted.c::print_partition_alignment() shall probably be exposed in some way -- at least when it comes to a warning like the one above. > > > > > Kind regards > Georgy Fedorov > Senior Systems Specialist > Melbourne School of Engineering > The University of Melbourne, Victoria 3010, Australia > email: gfedorov <at> unimelb.edu.au > http://www.eng.unimelb.edu.au >
GNU bug tracking system
Copyright (C) 1999 Darren O. Benham,
1997,2003 nCipher Corporation Ltd,
1994-97 Ian Jackson.