Subject: bug#70892: closed (Re: [bug#70892] [PATCH v3 0/7] Add visionfive2 support.)

From: [email-masked] (GNU bug Tracking System)
Date: Wed, 22 May 2024 03:23:01 +0000

Your bug report

#70892: [PATCH 0/6] Add visionfive2 support.

which was filed against the guix-patches package, has been closed.

The explanation is attached below, along with your original report.
If you require more details, please reply to [email-masked].

-- 
70892: https://debbugs.gnu.org/cgi/bugreport.cgi?bug=70892
GNU Bug Tracking System
Contact [email-masked] with problems

Subject: Re: [bug#70892] [PATCH v3 0/7] Add visionfive2 support.
From: Z572 <[email-masked]>
To: [email-masked]
Date: Wed, 22 May 2024 11:22:03 +0800
List-Id: <debbugs-submit.debbugs.gnu.org>

Zheng Junjie <[email-masked]> writes:

> this is v3 vsrsion.
> 1. fix "gnu: linux-libre-6.8: Add riscv config" commit text.
> 2. adjust gnu/system/images/visionfive2.scm commentary.
> 3. add comment for opensbi-for-visionfive2
>
> Zheng Junjie (7):
>   gnu: linux-libre-6.8: Add riscv config.
>   image: Raise error when use both grub-efi* bootloader and not gpt
>     image.
>   gnu: shepherd-0.10: When target riscv64, use guile-fibers-1.1.
>   gnu: Add opensbi-for-visionfive2.
>   gnu: Add u-boot-starfive-visionfive2.
>   bootloader: Add u-boot-starfive-visionfive2-bootloader.
>   system: images: Add visionfive2 module.
>
>  Makefile.am                                   |    1 +
>  gnu/bootloader/u-boot.scm                     |   29 +
>  gnu/local.mk                                  |    1 +
>  gnu/packages/admin.scm                        |    5 +-
>  .../aux-files/linux-libre/6.8-riscv.conf      | 7681 +++++++++++++++++
>  gnu/packages/bootloaders.scm                  |   25 +
>  gnu/packages/firmware.scm                     |   14 +
>  gnu/system/image.scm                          |    6 +-
>  gnu/system/images/visionfive2.scm             |  122 +
>  9 files changed, 7879 insertions(+), 5 deletions(-)
>  create mode 100644 gnu/packages/aux-files/linux-libre/6.8-riscv.conf
>  create mode 100644 gnu/system/images/visionfive2.scm
>
>
> base-commit: e9b25a6c6c626a560d28a1f732e6e5d362d584a4

push. close.

Subject: [PATCH 0/6] Add visionfive2 support.
From: Zheng Junjie <[email-masked]>
To: [email-masked]
Date: Sun, 12 May 2024 19:00:13 +0800
List-Id: <debbugs-submit.debbugs.gnu.org>

hello!, this patchset add support for visionfive2.
for now, must boot from spl's uboot and set fdtfile to starfive/jh7110-starfive-visionfive-2-v1.3b.dtb

uboot> setenv fdtfile starfive/jh7110-starfive-visionfive-2-v1.3b.dtb
uboot> savenv

Zheng Junjie (6):
  gnu: linux-libre-6.8: add riscv config.
  image: raise error when use both grub-efi* bootloader and not gpt
    image.
  gnu: shepherd-0.10: When target riscv64, use guile-fibers-1.1.
  gnu: Add u-boot-starfive-visionfive2.
  bootloader: Add u-boot-starfive-visionfive2-bootloader.
  system: images: Add visionfive2 module.

 Makefile.am                                   |    1 +
 gnu/bootloader/u-boot.scm                     |   17 +
 gnu/local.mk                                  |    1 +
 gnu/packages/admin.scm                        |    5 +-
 .../aux-files/linux-libre/6.8-riscv.conf      | 7681 +++++++++++++++++
 gnu/packages/bootloaders.scm                  |   31 +
 gnu/system/image.scm                          |    6 +-
 gnu/system/images/visionfive2.scm             |  121 +
 8 files changed, 7858 insertions(+), 5 deletions(-)
 create mode 100644 gnu/packages/aux-files/linux-libre/6.8-riscv.conf
 create mode 100644 gnu/system/images/visionfive2.scm

base-commit: 56980ea500a1db3c8586972b8abfaf5c4e24f82d
-- 
2.41.0