GNU bug report logs - #61557
vdirsyncer fails to verify certificates

Previous Next

Full log

Message #27 received at 61557 <at> debbugs.gnu.org (full text, mbox):

From: Giovanni Biscuolo <g <at> xelera.eu>
To: Ethan Blanton <elb <at> kb8ojh.net>, 61557 <at> debbugs.gnu.org
Cc: Leo Famulari <leo <at> famulari.name>
Subject: Re: bug#61557: vdirsyncer fails to verify certificates
Date: Mon, 27 Mar 2023 14:50:04 +0200

[Message part 1 (text/plain, inline)]

Hi Ethan,

I'm also using Guix on a foreign distribution (Debian)

Ethan Blanton via Bug reports for GNU Guix <bug-guix <at> gnu.org> writes:

> I had read the X.509 Certificates section of the manual, but since my
> certificates ARE in the default location of /etc/ssl/certs, and
> vdirsyncer had previously worked, for some reason I did not dig into
> it deeply enough, or perhaps I attempted to set it up wrongly at some
> point in the past.

I'm pretty sure my default profile vdirsyncer was working in the past
but stopped working while ago for this very same issue [1]; vdirsyncer
it's not working in my default profile but it's working in my "emacs"
profile

Reading (again) the "X.509 Certificates" section [2] I realized that I
had not set up SSL_CERT_DIR and SSL_CERT_FILE env variables in my
.profile

After adding this to my .profile:

--8<---------------cut here---------------start------------->8---

export SSL_CERT_DIR="$HOME/.guix-profile/etc/ssl/certs"
export SSL_CERT_FILE="$HOME/.guix-profile/etc/ssl/certs/ca-certificates.crt"

--8<---------------cut here---------------end--------------->8---

now "vdirsyncer sync" is working (in my default profile, including cron
jobs)

As I said before, the SSL_CERT_* variables setting was/is not necessary
in my emacs profile and it depends on this:

within a shell in my emacs profile I have:

--8<---------------cut here---------------start------------->8---

$: cat $GUIX_PROFILE/etc/profile | grep -i ssl
export CURL_CA_BUNDLE="${GUIX_PROFILE:-/gnu/store/hwc2pm42r2xg3mv0f7jlkf7dlvi6rpxh-profile}/etc/ssl/certs/ca-certificates.crt"
export SSL_CERT_FILE="${GUIX_PROFILE:-/gnu/store/hwc2pm42r2xg3mv0f7jlkf7dlvi6rpxh-profile}/etc/ssl/certs/ca-certificates.crt"
export SSL_CERT_DIR="${GUIX_PROFILE:-/gnu/store/hwc2pm42r2xg3mv0f7jlkf7dlvi6rpxh-profile}/etc/ssl/certs"
export GIT_SSL_CAINFO="${GUIX_PROFILE:-/gnu/store/hwc2pm42r2xg3mv0f7jlkf7dlvi6rpxh-profile}/etc/ssl/certs/ca-certificates.crt"

--8<---------------cut here---------------end--------------->8---

within a shell in my default profile:

--8<---------------cut here---------------start------------->8---

$: cat $GUIX_PROFILE/etc/profile | grep -i ssl
export GIT_SSL_CAINFO="${GUIX_PROFILE:-/gnu/store/ylycvfsnm1gkzhph39g62bwbc9lbh3g7-profile}/etc/ssl/certs/ca-certificates.crt"

--8<---------------cut here---------------end--------------->8---

For sure it depends on the fact that an installed package in my emacs
profile (curl, not installed in my default profile) is adding
"SSL_CERT_FILE" and "SSL_CERT_DIR" in $GUIX_PROFILE/etc/profile

Since I usually source the latter when I switch to my "emacs" profile
before starting emacs in a shell:

--8<---------------cut here---------------start------------->8---

GUIX_PROFILE="$GUIX_EXTRA_PROFILES"/emacs/emacs; . "$GUIX_PROFILE"/etc/profile

--8<---------------cut here---------------end--------------->8---

I get the two env variables defined in my "emacs" profile, while in my
default profile I don't

> Setting SSL_CERT_DIR=/etc/ssl/certs in my environment fixes the
> vdirsyncer package, and it syncs correctly.

I'd use the Guix certs installed via nss-certs, but both dirs works
obviously

Please note that you should set SSL_CERT_FILE for other software

> I have also discovered that python aiohttp will correctly verify
> certificates WITHOUT this environment variable with:
>
> guix shell -P -C -N python python-aiohttp nss-certs openssl
>
> Leaving out EITHER nss-certs OR openssl causes aiohttp to exhibit the
> same behavior as vdirsyncer.
>
> However, including both of these packages in the same (foreign distro)
> profile that includes vdirsyncer does NOT cause vdirsyncer to
> correctly verify certificates.

Strange behaviour, please can you tell us what is the output of this
command:

--8<---------------cut here---------------start------------->8---

guix shell --pure --container coreutils grep nss-certs openssl -- env | grep -i ssl

--8<---------------cut here---------------end--------------->8---

I get this (meaning that both SSL env variables are defined):

--8<---------------cut here---------------start------------->8---

SSL_CERT_DIR=/gnu/store/1ghginmnzplmp3nbv2jsavjgdjhgq4i3-profile/etc/ssl/certs
SSL_CERT_FILE=/gnu/store/1ghginmnzplmp3nbv2jsavjgdjhgq4i3-profile/etc/ssl/certs/ca-certificates.crt

--8<---------------cut here---------------end--------------->8---

while with

--8<---------------cut here---------------start------------->8---

guix shell --pure --container coreutils grep nss-certs -- env | grep -i ssl

--8<---------------cut here---------------end--------------->8---

I get no output (meaning that env is missing SSL_CERT_* variables)

So in my tests openssl (and curl) are defining "SSL_CERT_FILE" and
"SSL_CERT_DIR" in $GUIX_PROFILE/etc/profile

I guess that also nss-certs package could add both "SSL_CERT_FILE" and
"SSL_CERT_DIR" in $GUIX_PROFILE/etc/profile but I don't know the ratio
for this choiche

> I am not sure what this means for this bug; certainly the change from
> "working without extra configuration" to "broken without extra
> configuration" is a regression in user experience, but it may be that
> it is working as intended.

The bug I see here is that X.509 certificates are "working without extra
configuration" **depending** on installed packages.

If possible I'd patch nss-certs in order to add "SSL_CERT_FILE" and
"SSL_CERT_DIR" to $GUIX_PROFILE/etc/profile, this would also avoid the
extra step of "manually" defining X.509 related variables on foreign
distros

I'd also investigate this "meta-issue" for other packages, e.g. for R
that needs "CURL_CA_BUNDLE", added when installing curl but not
r-minimal

> It seems to me that the principle of least astonishment for foreign
> distro users would suggest that python aiohttp defaults to loading
> /etc/ssl/certs from the foreign distro, if present.

IMHO it's better to use the nss-certs installed via Guix than the
foreign distro ones

HTH!  Gio'


[1] maybe I was using a Guix package able to add "SSL_CERT_FILE" and
"SSL_CERT_DIR" to $GUIX_PROFILE/etc/profile and then I removed it

[2] https://guix.gnu.org/en/manual/en/html_node/X_002e509-Certificates.html

-- 
Giovanni Biscuolo

Xelera IT Infrastructures

[signature.asc (application/pgp-signature, inline)]

Previous Next

GNU bug tracking system
Copyright (C) 1999 Darren O. Benham, 1997,2003 nCipher Corporation Ltd, 1994-97 Ian Jackson.