Subject: bug#41082: nomodeset

From: Mathieu Othacehe <[email-masked]>
Date: Wed, 06 May 2020 08:56:48 +0200

Hello,

Thanks for reporting! It has been discussed on IRC, and booting the same
machine with integrated graphics works.

While uvesafb allows us to get framebuffer support in the
installer, the installed system will blackscreen or fail to boot with
those AMD GPUs.

Should we propose the installation of uvesafb service in the
installation? Or detect that it is currently used and force its install?

Florian, WDYT?

Thanks,

Mathieu

Ryan Osborne <[email-masked]> writes:

> nomodest allows the system to boot, but when it boots the framebuffer
> and X don't seem to work.
>
>
> [    0.000000] Linux version 5.4.38-gnu (nixbld@) (gcc version 7.4.0 (GCC)) #1 SMP 1
> [    0.000000] Command line: BOOT_IMAGE=/gnu/store/kygqk99rl8g66j9z125gnx4cyp7m9a5v-linux-libre-5.4.38/bzImage --root=/dev/mapper/cryptroot --system=/gnu/store/6hsgwcwzlyybim96i1jdp9hymsfj2sgf-system --load=/gnu/store/6hsgwcwzlyybim96i1jdp9hymsfj2sgf-system/boot modprobe.blacklist=usbmouse,usbkbd quiet nomodeset
> [    0.000000] KERNEL supported cpus:
> [    0.000000]   Intel GenuineIntel
> [    0.000000]   AMD AuthenticAMD
> [    0.000000]   Hygon HygonGenuine
> [    0.000000]   Centaur CentaurHauls
> [    0.000000]   zhaoxin   Shanghai  
> [    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
> [    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
> [    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
> [    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
> [    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
> [    0.000000] BIOS-provided physical RAM map:
> [    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
> [    0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
> [    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
> [    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cca94fff] usable
> [    0.000000] BIOS-e820: [mem 0x00000000cca95000-0x00000000cca9bfff] ACPI NVS
> [    0.000000] BIOS-e820: [mem 0x00000000cca9c000-0x00000000cd44bfff] usable
> [    0.000000] BIOS-e820: [mem 0x00000000cd44c000-0x00000000cd710fff] reserved
> [    0.000000] BIOS-e820: [mem 0x00000000cd711000-0x00000000dde9bfff] usable
> [    0.000000] BIOS-e820: [mem 0x00000000dde9c000-0x00000000ddf27fff] reserved
> [    0.000000] BIOS-e820: [mem 0x00000000ddf28000-0x00000000ddf42fff] ACPI data
> [    0.000000] BIOS-e820: [mem 0x00000000ddf43000-0x00000000de970fff] ACPI NVS
> [    0.000000] BIOS-e820: [mem 0x00000000de971000-0x00000000deffefff] reserved
> [    0.000000] BIOS-e820: [mem 0x00000000defff000-0x00000000deffffff] usable
> [    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
> [    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
> [    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
> [    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
> [    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
> [    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
> [    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021effffff] usable
> [    0.000000] NX (Execute Disable) protection: active
> [    0.000000] SMBIOS 2.8 present.
> [    0.000000] DMI: LENOVO 10B00005US/, BIOS FCKT50AUS 04/03/2014
> [    0.000000] tsc: Fast TSC calibration using PIT
> [    0.000000] tsc: Detected 3192.712 MHz processor
> [    0.001552] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
> [    0.001553] e820: remove [mem 0x000a0000-0x000fffff] usable
> [    0.001558] last_pfn = 0x21f000 max_arch_pfn = 0x400000000
> [    0.001561] MTRR default type: uncachable
> [    0.001562] MTRR fixed ranges enabled:
> [    0.001563]   00000-9FFFF write-back
> [    0.001563]   A0000-BFFFF uncachable
> [    0.001564]   C0000-CFFFF write-protect
> [    0.001565]   D0000-E7FFF uncachable
> [    0.001565]   E8000-FFFFF write-protect
> [    0.001565] MTRR variable ranges enabled:
> [    0.001567]   0 base 0000000000 mask 7E00000000 write-back
> [    0.001567]   1 base 0200000000 mask 7FF0000000 write-back
> [    0.001568]   2 base 0210000000 mask 7FF8000000 write-back
> [    0.001569]   3 base 0218000000 mask 7FFC000000 write-back
> [    0.001569]   4 base 021C000000 mask 7FFE000000 write-back
> [    0.001570]   5 base 021E000000 mask 7FFF000000 write-back
> [    0.001570]   6 base 00E0000000 mask 7FE0000000 uncachable
> [    0.001571]   7 disabled
> [    0.001571]   8 disabled
> [    0.001571]   9 disabled
> [    0.001854] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
> [    0.001984] total RAM covered: 8176M
> [    0.002302] Found optimal setting for mtrr clean up
> [    0.002302]  gran_size: 64K 	chunk_size: 32M 	num_reg: 6  	lose cover RAM: 0G
> [    0.002584] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
> [    0.002587] last_pfn = 0xdf000 max_arch_pfn = 0x400000000
> [    0.008697] found SMP MP-table at [mem 0x000fcd40-0x000fcd4f]
> [    0.018390] check: Scanning 1 areas for low memory corruption
> [    0.018394] Using GB pages for direct mapping
> [    0.018396] BRK [0xd7c01000, 0xd7c01fff] PGTABLE
> [    0.018397] BRK [0xd7c02000, 0xd7c02fff] PGTABLE
> [    0.018398] BRK [0xd7c03000, 0xd7c03fff] PGTABLE
> [    0.018420] BRK [0xd7c04000, 0xd7c04fff] PGTABLE
> [    0.018421] BRK [0xd7c05000, 0xd7c05fff] PGTABLE
> [    0.018531] BRK [0xd7c06000, 0xd7c06fff] PGTABLE
> [    0.018558] BRK [0xd7c07000, 0xd7c07fff] PGTABLE
> [    0.018643] BRK [0xd7c08000, 0xd7c08fff] PGTABLE
> [    0.018786] BRK [0xd7c09000, 0xd7c09fff] PGTABLE
> [    0.018822] RAMDISK: [mem 0x3674f000-0x3739efff]
> [    0.018825] ACPI: Early table checksum verification disabled
> [    0.018827] ACPI: RSDP 0x00000000000F0450 000024 (v02 LENOVO)
> [    0.018830] ACPI: XSDT 0x00000000DDF2D088 000094 (v01 LENOVO TC-FC    00001320 AMI  00010013)
> [    0.018834] ACPI: FACP 0x00000000DDF3D8F0 00010C (v05 LENOVO TC-FC    00001320 AMI  00010013)
> [    0.018837] ACPI: DSDT 0x00000000DDF2D1B0 010739 (v02 LENOVO TC-FC    00001320 INTL 20120711)
> [    0.018839] ACPI: FACS 0x00000000DE96F080 000040
> [    0.018841] ACPI: APIC 0x00000000DDF3DA00 000072 (v03 LENOVO TC-FC    00001320 AMI  00010013)
> [    0.018843] ACPI: FPDT 0x00000000DDF3DA78 000044 (v01 LENOVO TC-FC    00001320 AMI  00010013)
> [    0.018844] ACPI: LPIT 0x00000000DDF3DAC0 00005C (v01 LENOVO TC-FC    00001320 AMI. 00000005)
> [    0.018846] ACPI: SLIC 0x00000000DDF3DB20 000176 (v01 LENOVO TC-FC    00001320 AMI  00010013)
> [    0.018848] ACPI: MSDM 0x00000000DDF3DC98 000055 (v03 LENOVO TC-FC    00001320 AMI  00010013)
> [    0.018850] ACPI: SSDT 0x00000000DDF3DCF0 000539 (v01 LENOVO TC-FC    00001320 INTL 20120711)
> [    0.018852] ACPI: SSDT 0x00000000DDF3E230 000AD8 (v01 LENOVO TC-FC    00001320 INTL 20120711)
> [    0.018854] ACPI: MCFG 0x00000000DDF3ED08 00003C (v01 LENOVO TC-FC    00001320 MSFT 00000097)
> [    0.018855] ACPI: HPET 0x00000000DDF3ED48 000038 (v01 LENOVO TC-FC    00001320 AMI. 00000005)
> [    0.018857] ACPI: SSDT 0x00000000DDF3ED80 00036D (v01 LENOVO TC-FC    00001320 INTL 20120711)
> [    0.018859] ACPI: SSDT 0x00000000DDF3F0F0 0034E1 (v01 LENOVO TC-FC    00001320 INTL 20091112)
> [    0.018861] ACPI: BGRT 0x00000000DDF425D8 000038 (v00 LENOVO TC-FC    00001320 AMI  00010013)
> [    0.018863] ACPI: DMAR 0x00000000DDF42610 000080 (v01 LENOVO TC-FC    00001320 INTL 00000001)
> [    0.018868] ACPI: Local APIC address 0xfee00000
> [    0.018928] No NUMA configuration found
> [    0.018928] Faking a node at [mem 0x0000000000000000-0x000000021effffff]
> [    0.018931] NODE_DATA(0) allocated [mem 0x21effa000-0x21effdfff]
> [    0.018948] Zone ranges:
> [    0.018949]   DMA32    [mem 0x0000000000001000-0x00000000ffffffff]
> [    0.018950]   Normal   [mem 0x0000000100000000-0x000000021effffff]
> [    0.018951]   Device   empty
> [    0.018951] Movable zone start for each node
> [    0.018952] Early memory node ranges
> [    0.018952]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
> [    0.018953]   node   0: [mem 0x0000000000100000-0x00000000cca94fff]
> [    0.018954]   node   0: [mem 0x00000000cca9c000-0x00000000cd44bfff]
> [    0.018954]   node   0: [mem 0x00000000cd711000-0x00000000dde9bfff]
> [    0.018955]   node   0: [mem 0x00000000defff000-0x00000000deffffff]
> [    0.018955]   node   0: [mem 0x0000000100000000-0x000000021effffff]
> [    0.019064] Zeroed struct page in unavailable ranges: 13459 pages
> [    0.019065] Initmem setup node 0 [mem 0x0000000000001000-0x000000021effffff]
> [    0.019066] On node 0 totalpages: 2083693
> [    0.019066]   DMA32 zone: 14190 pages used for memmap
> [    0.019067]   DMA32 zone: 21 pages reserved
> [    0.019068]   DMA32 zone: 908141 pages, LIFO batch:63
> [    0.027939]   Normal zone: 18368 pages used for memmap
> [    0.027941]   Normal zone: 1175552 pages, LIFO batch:63
> [    0.038832] ACPI: PM-Timer IO Port: 0x1808
> [    0.038834] ACPI: Local APIC address 0xfee00000
> [    0.038839] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
> [    0.038849] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
> [    0.038850] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> [    0.038851] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
> [    0.038852] ACPI: IRQ0 used by override.
> [    0.038852] ACPI: IRQ9 used by override.
> [    0.038854] Using ACPI (MADT) for SMP configuration information
> [    0.038855] ACPI: HPET id: 0x8086a701 base: 0xfed00000
> [    0.038859] [Firmware Bug]: TSC_DEADLINE disabled due to Errata; /*(DEBLOBBED)*/
> [    0.038861] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
> [    0.038875] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
> [    0.038876] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
> [    0.038876] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
> [    0.038877] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
> [    0.038877] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
> [    0.038878] PM: Registered nosave memory: [mem 0xcca95000-0xcca9bfff]
> [    0.038879] PM: Registered nosave memory: [mem 0xcd44c000-0xcd710fff]
> [    0.038880] PM: Registered nosave memory: [mem 0xdde9c000-0xddf27fff]
> [    0.038881] PM: Registered nosave memory: [mem 0xddf28000-0xddf42fff]
> [    0.038881] PM: Registered nosave memory: [mem 0xddf43000-0xde970fff]
> [    0.038882] PM: Registered nosave memory: [mem 0xde971000-0xdeffefff]
> [    0.038883] PM: Registered nosave memory: [mem 0xdf000000-0xf7ffffff]
> [    0.038883] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
> [    0.038884] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
> [    0.038884] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
> [    0.038885] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
> [    0.038885] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
> [    0.038885] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
> [    0.038886] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
> [    0.038886] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
> [    0.038887] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
> [    0.038887] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
> [    0.038887] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
> [    0.038889] [mem 0xdf000000-0xf7ffffff] available for PCI devices
> [    0.038889] Booting paravirtualized kernel on bare hardware
> [    0.038892] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
> [    0.038897] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
> [    0.039029] percpu: Embedded 53 pages/cpu s178520 r8192 d30376 u524288
> [    0.039034] pcpu-alloc: s178520 r8192 d30376 u524288 alloc=1*2097152
> [    0.039035] pcpu-alloc: [0] 0 1 2 3 
> [    0.039052] Built 1 zonelists, mobility grouping on.  Total pages: 2051114
> [    0.039053] Policy zone: Normal
> [    0.039054] Kernel command line: BOOT_IMAGE=/gnu/store/kygqk99rl8g66j9z125gnx4cyp7m9a5v-linux-libre-5.4.38/bzImage --root=/dev/mapper/cryptroot --system=/gnu/store/6hsgwcwzlyybim96i1jdp9hymsfj2sgf-system --load=/gnu/store/6hsgwcwzlyybim96i1jdp9hymsfj2sgf-system/boot modprobe.blacklist=usbmouse,usbkbd quiet nomodeset
> [    0.039147] You have booted with nomodeset. This means your GPU drivers are DISABLED
> [    0.039147] Any video related functionality will be severely degraded, and you may not even be able to suspend the system properly
> [    0.039148] Unless you actually understand what nomodeset does, you should reboot without enabling it
> [    0.039497] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
> [    0.039680] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
> [    0.039717] mem auto-init: stack:byref_all, heap alloc:on, heap free:off
> [    0.042574] Calgary: detecting Calgary via BIOS EBDA area
> [    0.042576] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
> [    0.060675] Memory: 8083152K/8334772K available (14339K kernel code, 1525K rwdata, 4184K rodata, 1916K init, 2584K bss, 251620K reserved, 0K cma-reserved)
> [    0.060681] random: get_random_u64 called from __kmem_cache_create+0x46/0x570 with crng_init=0
> [    0.060757] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
> [    0.060767] Kernel/User page tables isolation: enabled
> [    0.060777] ftrace: allocating 41677 entries in 163 pages
> [    0.074199] rcu: Hierarchical RCU implementation.
> [    0.074200] rcu: 	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
> [    0.074201] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
> [    0.074202] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
> [    0.076242] NR_IRQS: 16640, nr_irqs: 456, preallocated irqs: 16
> [    0.076457] spurious 8259A interrupt: IRQ7.
> [    0.079840] Console: colour VGA+ 80x25
> [    0.079883] printk: console [tty0] enabled
> [    0.079896] ACPI: Core revision 20190816
> [    0.079988] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
> [    0.080000] APIC: Switch to symmetric I/O mode setup
> [    0.080001] DMAR: Host address width 39
> [    0.080002] DMAR: DRHD base: 0x000000fed90000 flags: 0x1
> [    0.080005] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap d2008c20660462 ecap f010da
> [    0.080006] DMAR: RMRR base: 0x000000dee8f000 end: 0x000000dee9dfff
> [    0.080007] DMAR-IR: IOAPIC id 8 under DRHD base  0xfed90000 IOMMU 0
> [    0.080008] DMAR-IR: HPET id 0 under DRHD base 0xfed90000
> [    0.080008] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
> [    0.080227] DMAR-IR: Enabled IRQ remapping in x2apic mode
> [    0.080228] x2apic enabled
> [    0.080234] Switched APIC routing to cluster x2apic.
> [    0.080621] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
> [    0.100000] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2e056531aca, max_idle_ns: 440795249676 ns
> [    0.100003] Calibrating delay loop (skipped), value calculated using timer frequency.. 6385.42 BogoMIPS (lpj=12770848)
> [    0.100005] pid_max: default: 32768 minimum: 301
> [    0.100023] LSM: Security Framework initializing
> [    0.100027] Yama: becoming mindful.
> [    0.100048] AppArmor: AppArmor initialized
> [    0.100050] TOMOYO Linux initialized
> [    0.100087] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
> [    0.100099] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
> [    0.100107] *** VALIDATE tmpfs ***
> [    0.100207] *** VALIDATE proc ***
> [    0.100249] *** VALIDATE cgroup1 ***
> [    0.100249] *** VALIDATE cgroup2 ***
> [    0.100288] mce: CPU0: Thermal monitoring enabled (TM1)
> [    0.100299] process: using mwait in idle threads
> [    0.100301] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
> [    0.100301] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
> [    0.100303] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
> [    0.100304] Spectre V2 : Mitigation: Full generic retpoline
> [    0.100305] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
> [    0.100305] Speculative Store Bypass: Vulnerable
> [    0.100308] TAA: Vulnerable: Clear CPU buffers attempted, no microcode
> [    0.100308] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
> [    0.100440] Freeing SMP alternatives memory: 28K
> [    0.210141] smpboot: CPU0: Intel(R) Core(TM) i5-4570 CPU @ 3.20GHz (family: 0x6, model: 0x3c, stepping: 0x3)
> [    0.210202] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
> [    0.210207] ... version:                3
> [    0.210208] ... bit width:              48
> [    0.210208] ... generic registers:      8
> [    0.210208] ... value mask:             0000ffffffffffff
> [    0.210209] ... max period:             00007fffffffffff
> [    0.210209] ... fixed-purpose events:   3
> [    0.210210] ... event mask:             00000007000000ff
> [    0.210236] rcu: Hierarchical SRCU implementation.
> [    0.210833] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
> [    0.210865] smp: Bringing up secondary CPUs ...
> [    0.210917] x86: Booting SMP configuration:
> [    0.210918] .... node  #0, CPUs:      #1 #2 #3
> [    0.211187] smp: Brought up 1 node, 4 CPUs
> [    0.211187] smpboot: Max logical packages: 1
> [    0.211187] smpboot: Total of 4 processors activated (25541.69 BogoMIPS)
> [    0.211187] devtmpfs: initialized
> [    0.211187] x86/mm: Memory block size: 128MB
> [    0.211187] PM: Registering ACPI NVS region [mem 0xcca95000-0xcca9bfff] (28672 bytes)
> [    0.211187] PM: Registering ACPI NVS region [mem 0xddf43000-0xde970fff] (10674176 bytes)
> [    0.212125] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
> [    0.212130] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
> [    0.212172] pinctrl core: initialized pinctrl subsystem
> [    0.212247] PM: RTC time: 12:25:05, date: 2020-05-05
> [    0.212302] NET: Registered protocol family 16
> [    0.212368] audit: initializing netlink subsys (disabled)
> [    0.212372] audit: type=2000 audit(1588681505.132:1): state=initialized audit_enabled=0 res=1
> [    0.212372] cpuidle: using governor ladder
> [    0.212372] cpuidle: using governor menu
> [    0.212372] ACPI: bus type PCI registered
> [    0.212372] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
> [    0.212372] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
> [    0.212372] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
> [    0.212372] PCI: Using configuration type 1 for base access
> [    0.212372] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off
> [    0.212449] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
> [    0.212993] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
> [    0.212993] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
> [    0.212993] ACPI: Added _OSI(Module Device)
> [    0.212993] ACPI: Added _OSI(Processor Device)
> [    0.212993] ACPI: Added _OSI(3.0 _SCP Extensions)
> [    0.212993] ACPI: Added _OSI(Processor Aggregator Device)
> [    0.212993] ACPI: Added _OSI(Linux-Dell-Video)
> [    0.212993] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
> [    0.212993] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
> [    0.222912] ACPI: 5 ACPI AML tables successfully acquired and loaded
> [    0.224122] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
> [    0.224627] ACPI: Dynamic OEM Table Load:
> [    0.224627] ACPI: SSDT 0xFFFF96C6D510B800 0003D3 (v01 PmRef  Cpu0Cst  00003001 INTL 20120711)
> [    0.224768] ACPI: Dynamic OEM Table Load:
> [    0.224771] ACPI: SSDT 0xFFFF96C6D52C4800 0005AA (v01 PmRef  ApIst    00003000 INTL 20120711)
> [    0.225443] ACPI: Dynamic OEM Table Load:
> [    0.225445] ACPI: SSDT 0xFFFF96C6D4D56200 000119 (v01 PmRef  ApCst    00003000 INTL 20120711)
> [    0.228223] ACPI: Interpreter enabled
> [    0.228246] ACPI: (supports S0 S3 S4 S5)
> [    0.228247] ACPI: Using IOAPIC for interrupt routing
> [    0.228266] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
> [    0.228482] ACPI: Enabled 10 GPEs in block 00 to 3F
> [    0.235440] ACPI: Power Resource [FN00] (off)
> [    0.235491] ACPI: Power Resource [FN01] (off)
> [    0.235540] ACPI: Power Resource [FN02] (off)
> [    0.235589] ACPI: Power Resource [FN03] (off)
> [    0.235637] ACPI: Power Resource [FN04] (off)
> [    0.236243] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
> [    0.236247] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
> [    0.236683] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
> [    0.236968] PCI host bridge to bus 0000:00
> [    0.236970] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
> [    0.236971] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
> [    0.236972] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
> [    0.236972] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
> [    0.236973] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
> [    0.236974] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
> [    0.236975] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
> [    0.236975] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
> [    0.236976] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
> [    0.236977] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff window]
> [    0.236978] pci_bus 0000:00: root bus resource [bus 00-3e]
> [    0.236985] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
> [    0.237051] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
> [    0.237083] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
> [    0.237190] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
> [    0.237209] pci 0000:00:14.0: reg 0x10: [mem 0xf7f00000-0xf7f0ffff 64bit]
> [    0.237262] pci 0000:00:14.0: PME# supported from D3hot D3cold
> [    0.237324] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
> [    0.237343] pci 0000:00:16.0: reg 0x10: [mem 0xf7f1a000-0xf7f1a00f 64bit]
> [    0.237398] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
> [    0.237458] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
> [    0.237477] pci 0000:00:1a.0: reg 0x10: [mem 0xf7f18000-0xf7f183ff]
> [    0.237550] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
> [    0.237615] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
> [    0.237632] pci 0000:00:1b.0: reg 0x10: [mem 0xf7f10000-0xf7f13fff 64bit]
> [    0.237692] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
> [    0.237753] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
> [    0.237847] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
> [    0.237942] pci 0000:00:1c.5: [8086:8c1a] type 01 class 0x060400
> [    0.238012] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
> [    0.238103] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
> [    0.238123] pci 0000:00:1d.0: reg 0x10: [mem 0xf7f17000-0xf7f173ff]
> [    0.238196] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
> [    0.238262] pci 0000:00:1f.0: [8086:8c5c] type 00 class 0x060100
> [    0.238415] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601
> [    0.238429] pci 0000:00:1f.2: reg 0x10: [io  0xf070-0xf077]
> [    0.238436] pci 0000:00:1f.2: reg 0x14: [io  0xf060-0xf063]
> [    0.238442] pci 0000:00:1f.2: reg 0x18: [io  0xf050-0xf057]
> [    0.238448] pci 0000:00:1f.2: reg 0x1c: [io  0xf040-0xf043]
> [    0.238454] pci 0000:00:1f.2: reg 0x20: [io  0xf020-0xf03f]
> [    0.238460] pci 0000:00:1f.2: reg 0x24: [mem 0xf7f16000-0xf7f167ff]
> [    0.238491] pci 0000:00:1f.2: PME# supported from D3hot
> [    0.240009] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
> [    0.240025] pci 0000:00:1f.3: reg 0x10: [mem 0xf7f15000-0xf7f150ff 64bit]
> [    0.240042] pci 0000:00:1f.3: reg 0x20: [io  0x0580-0x059f]
> [    0.240142] pci 0000:01:00.0: [1002:67ff] type 00 class 0x030000
> [    0.240164] pci 0000:01:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
> [    0.240173] pci 0000:01:00.0: reg 0x18: [mem 0xf0000000-0xf01fffff 64bit pref]
> [    0.240179] pci 0000:01:00.0: reg 0x20: [io  0xe000-0xe0ff]
> [    0.240185] pci 0000:01:00.0: reg 0x24: [mem 0xf7e00000-0xf7e3ffff]
> [    0.240191] pci 0000:01:00.0: reg 0x30: [mem 0xf7e40000-0xf7e5ffff pref]
> [    0.240247] pci 0000:01:00.0: supports D1 D2
> [    0.240248] pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold
> [    0.240276] pci 0000:01:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 5 GT/s x8 link at 0000:00:01.0 (capable of 63.008 Gb/s with 8 GT/s x8 link)
> [    0.240317] pci 0000:01:00.1: [1002:aae0] type 00 class 0x040300
> [    0.240335] pci 0000:01:00.1: reg 0x10: [mem 0xf7e60000-0xf7e63fff 64bit]
> [    0.240404] pci 0000:01:00.1: supports D1 D2
> [    0.240472] pci 0000:00:01.0: PCI bridge to [bus 01]
> [    0.240474] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
> [    0.240475] pci 0000:00:01.0:   bridge window [mem 0xf7e00000-0xf7efffff]
> [    0.240477] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
> [    0.240523] pci 0000:00:1c.0: PCI bridge to [bus 02]
> [    0.240586] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
> [    0.240615] pci 0000:03:00.0: reg 0x10: [io  0xd000-0xd0ff]
> [    0.240641] pci 0000:03:00.0: reg 0x18: [mem 0xf7d04000-0xf7d04fff 64bit]
> [    0.240657] pci 0000:03:00.0: reg 0x20: [mem 0xf7d00000-0xf7d03fff 64bit pref]
> [    0.240755] pci 0000:03:00.0: supports D1 D2
> [    0.240756] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
> [    0.240867] pci 0000:00:1c.5: PCI bridge to [bus 03]
> [    0.240870] pci 0000:00:1c.5:   bridge window [io  0xd000-0xdfff]
> [    0.240873] pci 0000:00:1c.5:   bridge window [mem 0xf7d00000-0xf7dfffff]
> [    0.241546] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
> [    0.241581] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
> [    0.241614] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15)
> [    0.241647] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
> [    0.241680] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
> [    0.241712] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
> [    0.241745] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15)
> [    0.241778] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
> [    0.242078] iommu: Default domain type: Translated 
> [    0.242078] pci 0000:01:00.0: vgaarb: setting as boot VGA device
> [    0.242078] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
> [    0.242078] pci 0000:01:00.0: vgaarb: bridge control possible
> [    0.242078] vgaarb: loaded
> [    0.242078] SCSI subsystem initialized
> [    0.242078] libata version 3.00 loaded.
> [    0.242078] ACPI: bus type USB registered
> [    0.242078] usbcore: registered new interface driver usbfs
> [    0.242078] usbcore: registered new interface driver hub
> [    0.242078] usbcore: registered new device driver usb
> [    0.242078] EDAC MC: Ver: 3.0.0
> [    0.242078] PCI: Using ACPI for IRQ routing
> [    0.242078] PCI: pci_cache_line_size set to 64 bytes
> [    0.242078] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
> [    0.242078] e820: reserve RAM buffer [mem 0xcca95000-0xcfffffff]
> [    0.242078] e820: reserve RAM buffer [mem 0xcd44c000-0xcfffffff]
> [    0.242078] e820: reserve RAM buffer [mem 0xdde9c000-0xdfffffff]
> [    0.242078] e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff]
> [    0.242078] e820: reserve RAM buffer [mem 0x21f000000-0x21fffffff]
> [    0.244004] NetLabel: Initializing
> [    0.244004] NetLabel:  domain hash size = 128
> [    0.244004] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
> [    0.244004] NetLabel:  unlabeled traffic allowed by default
> [    0.244034] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
> [    0.244037] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
> [    0.246053] clocksource: Switched to clocksource tsc-early
> [    0.252217] *** VALIDATE bpf ***
> [    0.252274] VFS: Disk quotas dquot_6.6.0
> [    0.252286] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
> [    0.252305] *** VALIDATE ramfs ***
> [    0.252307] *** VALIDATE hugetlbfs ***
> [    0.252376] AppArmor: AppArmor Filesystem Enabled
> [    0.252398] pnp: PnP ACPI init
> [    0.252493] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
> [    0.252497] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
> [    0.252626] system 00:01: [io  0x0680-0x069f] has been reserved
> [    0.252627] system 00:01: [io  0xffff] has been reserved
> [    0.252628] system 00:01: [io  0xffff] has been reserved
> [    0.252629] system 00:01: [io  0xffff] has been reserved
> [    0.252630] system 00:01: [io  0x1c00-0x1cfe] has been reserved
> [    0.252631] system 00:01: [io  0x1d00-0x1dfe] has been reserved
> [    0.252632] system 00:01: [io  0x1e00-0x1efe] has been reserved
> [    0.252633] system 00:01: [io  0x1f00-0x1ffe] has been reserved
> [    0.252634] system 00:01: [io  0x1800-0x18fe] has been reserved
> [    0.252635] system 00:01: [io  0x164e-0x164f] has been reserved
> [    0.252637] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
> [    0.252663] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
> [    0.252697] system 00:03: [io  0x1854-0x1857] has been reserved
> [    0.252699] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
> [    0.252793] system 00:04: [io  0x0a00-0x0a1f] has been reserved
> [    0.252794] system 00:04: [io  0x0a30-0x0a3f] has been reserved
> [    0.252795] system 00:04: [io  0x0a20-0x0a2f] has been reserved
> [    0.252798] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
> [    0.253006] pnp 00:05: [dma 0 disabled]
> [    0.253034] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
> [    0.253148] system 00:06: [io  0x04d0-0x04d1] has been reserved
> [    0.253150] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
> [    0.253452] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
> [    0.253453] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
> [    0.253454] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
> [    0.253455] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
> [    0.253456] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved
> [    0.253457] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
> [    0.253458] system 00:07: [mem 0xfed90000-0xfed93fff] could not be reserved
> [    0.253459] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
> [    0.253460] system 00:07: [mem 0xff000000-0xffffffff] has been reserved
> [    0.253461] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
> [    0.253462] system 00:07: [mem 0xf7fdf000-0xf7fdffff] has been reserved
> [    0.253463] system 00:07: [mem 0xf7fe0000-0xf7feffff] has been reserved
> [    0.253466] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
> [    0.253629] pnp: PnP ACPI: found 8 devices
> [    0.254495] thermal_sys: Registered thermal governor 'fair_share'
> [    0.254496] thermal_sys: Registered thermal governor 'bang_bang'
> [    0.254496] thermal_sys: Registered thermal governor 'step_wise'
> [    0.254497] thermal_sys: Registered thermal governor 'user_space'
> [    0.254497] thermal_sys: Registered thermal governor 'power_allocator'
> [    0.258989] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
> [    0.259013] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 02] add_size 1000
> [    0.259015] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
> [    0.259016] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000
> [    0.259022] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf0200000-0xf03fffff]
> [    0.259026] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf0400000-0xf05fffff 64bit pref]
> [    0.259028] pci 0000:00:1c.0: BAR 13: assigned [io  0x2000-0x2fff]
> [    0.259030] pci 0000:00:01.0: PCI bridge to [bus 01]
> [    0.259031] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
> [    0.259034] pci 0000:00:01.0:   bridge window [mem 0xf7e00000-0xf7efffff]
> [    0.259035] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
> [    0.259038] pci 0000:00:1c.0: PCI bridge to [bus 02]
> [    0.259040] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
> [    0.259044] pci 0000:00:1c.0:   bridge window [mem 0xf0200000-0xf03fffff]
> [    0.259046] pci 0000:00:1c.0:   bridge window [mem 0xf0400000-0xf05fffff 64bit pref]
> [    0.259051] pci 0000:00:1c.5: PCI bridge to [bus 03]
> [    0.259053] pci 0000:00:1c.5:   bridge window [io  0xd000-0xdfff]
> [    0.259056] pci 0000:00:1c.5:   bridge window [mem 0xf7d00000-0xf7dfffff]
> [    0.259063] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
> [    0.259064] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
> [    0.259065] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
> [    0.259066] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
> [    0.259066] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
> [    0.259067] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
> [    0.259068] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
> [    0.259069] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window]
> [    0.259069] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window]
> [    0.259070] pci_bus 0000:00: resource 13 [mem 0xe0000000-0xfeafffff window]
> [    0.259071] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
> [    0.259072] pci_bus 0000:01: resource 1 [mem 0xf7e00000-0xf7efffff]
> [    0.259073] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf01fffff 64bit pref]
> [    0.259074] pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
> [    0.259074] pci_bus 0000:02: resource 1 [mem 0xf0200000-0xf03fffff]
> [    0.259075] pci_bus 0000:02: resource 2 [mem 0xf0400000-0xf05fffff 64bit pref]
> [    0.259076] pci_bus 0000:03: resource 0 [io  0xd000-0xdfff]
> [    0.259077] pci_bus 0000:03: resource 1 [mem 0xf7d00000-0xf7dfffff]
> [    0.259153] NET: Registered protocol family 2
> [    0.259251] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
> [    0.259283] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
> [    0.259381] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
> [    0.259436] TCP: Hash tables configured (established 65536 bind 65536)
> [    0.259460] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
> [    0.259478] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
> [    0.259510] NET: Registered protocol family 1
> [    0.280722] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x6c0 took 20561 usecs
> [    0.304717] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x6c0 took 23419 usecs
> [    0.304732] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
> [    0.304737] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0
> [    0.304743] PCI: CLS 64 bytes, default 64
> [    0.304807] Trying to unpack rootfs image as initramfs...
> [    0.458348] Freeing initrd memory: 12608K
> [    0.480665] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
> [    0.480667] software IO TLB: mapped [mem 0xd9e9c000-0xdde9c000] (64MB)
> [    0.480723] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 655360 ms ovfl timer
> [    0.480723] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
> [    0.480724] RAPL PMU: hw unit of domain package 2^-14 Joules
> [    0.480724] RAPL PMU: hw unit of domain dram 2^-14 Joules
> [    0.480884] check: Scanning for low memory corruption every 60 seconds
> [    0.481273] Initialise system trusted keyrings
> [    0.481292] workingset: timestamp_bits=40 max_order=21 bucket_order=0
> [    0.482143] zbud: loaded
> [    0.482551] Allocating IMA blacklist keyring.
> [    0.485391] Key type asymmetric registered
> [    0.485392] Asymmetric key parser 'x509' registered
> [    0.485397] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
> [    0.485419] io scheduler mq-deadline registered
> [    0.485609] pcieport 0000:00:01.0: PME: Signaling with IRQ 25
> [    0.485734] pcieport 0000:00:1c.0: PME: Signaling with IRQ 26
> [    0.485752] pcieport 0000:00:1c.0: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
> [    0.485912] pcieport 0000:00:1c.5: PME: Signaling with IRQ 27
> [    0.485962] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
> [    0.485979] intel_idle: MWAIT substates: 0x42120
> [    0.485979] intel_idle: v0.4.1 model 0x3C
> [    0.486114] intel_idle: lapic_timer_reliable_states 0xffffffff
> [    0.486178] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
> [    0.486202] ACPI: Power Button [PWRB]
> [    0.486225] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
> [    0.486239] ACPI: Power Button [PWRF]
> [    0.486703] thermal LNXTHERM:00: registered as thermal_zone0
> [    0.486703] ACPI: Thermal Zone [TZ00] (28 C)
> [    0.486835] thermal LNXTHERM:01: registered as thermal_zone1
> [    0.486835] ACPI: Thermal Zone [TZ01] (30 C)
> [    0.486969] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
> [    0.507327] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
> [    0.508387] Linux agpgart interface v0.103
> [    0.509862] brd: module loaded
> [    0.510970] loop: module loaded
> [    0.511431] libphy: Fixed MDIO Bus: probed
> [    0.511432] tun: Universal TUN/TAP device driver, 1.6
> [    0.511500] PPP generic driver version 2.4.2
> [    0.511530] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
> [    0.511537] ehci-pci: EHCI PCI platform driver
> [    0.511616] ehci-pci 0000:00:1a.0: EHCI Host Controller
> [    0.511620] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
> [    0.511629] ehci-pci 0000:00:1a.0: debug port 2
> [    0.515518] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
> [    0.515527] ehci-pci 0000:00:1a.0: irq 17, io mem 0xf7f18000
> [    0.529753] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
> [    0.529801] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
> [    0.529802] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [    0.529803] usb usb1: Product: EHCI Host Controller
> [    0.529804] usb usb1: Manufacturer: Linux 5.4.38-gnu ehci_hcd
> [    0.529805] usb usb1: SerialNumber: 0000:00:1a.0
> [    0.529978] hub 1-0:1.0: USB hub found
> [    0.529984] hub 1-0:1.0: 2 ports detected
> [    0.530207] ehci-pci 0000:00:1d.0: EHCI Host Controller
> [    0.530211] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
> [    0.530220] ehci-pci 0000:00:1d.0: debug port 2
> [    0.534132] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
> [    0.534143] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7f17000
> [    0.549751] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
> [    0.549794] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
> [    0.549795] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [    0.549796] usb usb2: Product: EHCI Host Controller
> [    0.549797] usb usb2: Manufacturer: Linux 5.4.38-gnu ehci_hcd
> [    0.549798] usb usb2: SerialNumber: 0000:00:1d.0
> [    0.549974] hub 2-0:1.0: USB hub found
> [    0.549978] hub 2-0:1.0: 2 ports detected
> [    0.550106] ehci-platform: EHCI generic platform driver
> [    0.550118] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
> [    0.550121] ohci-pci: OHCI PCI platform driver
> [    0.550128] ohci-platform: OHCI generic platform driver
> [    0.550134] uhci_hcd: USB Universal Host Controller Interface driver
> [    0.550247] xhci_hcd 0000:00:14.0: xHCI Host Controller
> [    0.550251] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
> [    0.551292] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810
> [    0.551296] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
> [    0.551408] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
> [    0.551409] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [    0.551410] usb usb3: Product: xHCI Host Controller
> [    0.551410] usb usb3: Manufacturer: Linux 5.4.38-gnu xhci-hcd
> [    0.551411] usb usb3: SerialNumber: 0000:00:14.0
> [    0.551547] hub 3-0:1.0: USB hub found
> [    0.551557] hub 3-0:1.0: 10 ports detected
> [    0.552523] xhci_hcd 0000:00:14.0: xHCI Host Controller
> [    0.552525] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
> [    0.552527] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
> [    0.552548] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
> [    0.552548] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [    0.552549] usb usb4: Product: xHCI Host Controller
> [    0.552550] usb usb4: Manufacturer: Linux 5.4.38-gnu xhci-hcd
> [    0.552550] usb usb4: SerialNumber: 0000:00:14.0
> [    0.552686] hub 4-0:1.0: USB hub found
> [    0.552691] hub 4-0:1.0: 2 ports detected
> [    0.552848] i8042: PNP: No PS/2 controller found.
> [    0.553034] mousedev: PS/2 mouse device common for all mice
> [    0.553213] rtc_cmos 00:02: RTC can wake from S4
> [    0.553373] rtc_cmos 00:02: registered as rtc0
> [    0.553382] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
> [    0.553386] i2c /dev entries driver
> [    0.553418] device-mapper: uevent: version 1.0.3
> [    0.553481] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: [email-masked]
> [    0.553484] intel_pstate: Intel P-state driver initializing
> [    0.553779] ledtrig-cpu: registered to indicate activity on CPUs
> [    0.553977] NET: Registered protocol family 10
> [    0.554124] Segment Routing with IPv6
> [    0.554137] NET: Registered protocol family 17
> [    0.554165] Key type dns_resolver registered
> [    0.554370] microcode: sig=0x306c3, pf=0x2, revision=0x17
> [    0.554434] microcode: Microcode Update Driver: v2.2.
> [    0.554436] IPI shorthand broadcast: enabled
> [    0.554440] sched_clock: Marking stable (550840010, 3591423)->(559920014, -5488581)
> [    0.554523] registered taskstats version 1
> [    0.554524] Loading compiled-in X.509 certificates
> [    0.554542] zswap: loaded using pool lzo/zbud
> [    0.554865] Key type big_key registered
> [    0.554954] Key type encrypted registered
> [    0.554956] AppArmor: AppArmor sha1 policy hashing enabled
> [    0.554961] ima: No TPM chip found, activating TPM-bypass!
> [    0.554964] ima: Allocated hash algorithm: sha1
> [    0.554968] ima: No architecture policies found
> [    0.554974] evm: Initialising EVM extended attributes:
> [    0.554974] evm: security.selinux
> [    0.554975] evm: security.SMACK64
> [    0.554975] evm: security.SMACK64EXEC
> [    0.554975] evm: security.SMACK64TRANSMUTE
> [    0.554976] evm: security.SMACK64MMAP
> [    0.554976] evm: security.apparmor
> [    0.554976] evm: security.ima
> [    0.554977] evm: security.capability
> [    0.554977] evm: HMAC attrs: 0x1
> [    0.555339] PM:   Magic number: 4:16:430
> [    0.555418] rtc_cmos 00:02: setting system clock to 2020-05-05T12:25:05 UTC (1588681505)
> [    0.556304] Freeing unused kernel image memory: 1916K
> [    0.574556] Write protecting the kernel read-only data: 22528k
> [    0.574939] Freeing unused kernel image memory: 2036K
> [    0.575189] Freeing unused kernel image memory: 1960K
> [    0.575206] Run /init as init process
> [    0.615477] ahci 0000:00:1f.2: version 3.0
> [    0.615638] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x3 impl SATA mode
> [    0.615639] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems 
> [    0.625270] scsi host0: ahci
> [    0.625510] scsi host1: ahci
> [    0.625796] scsi host2: ahci
> [    0.625894] scsi host3: ahci
> [    0.625936] ata1: SATA max UDMA/133 abar m2048@0xf7f16000 port 0xf7f16100 irq 29
> [    0.625937] ata2: SATA max UDMA/133 abar m2048@0xf7f16000 port 0xf7f16180 irq 29
> [    0.625938] ata3: DUMMY
> [    0.625938] ata4: DUMMY
> [    0.866534] usb 1-1: new high-speed USB device number 2 using ehci-pci
> [    0.886540] usb 2-1: new high-speed USB device number 2 using ehci-pci
> [    0.886553] usb 3-1: new full-speed USB device number 2 using xhci_hcd
> [    0.940718] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
> [    0.942536] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [    0.942606] ata1.00: supports DRM functions and may not be fully accessible
> [    0.943652] ata1.00: ATA-11: Samsung SSD 860 EVO 500GB, RVT01B6Q, max UDMA/133
> [    0.943654] ata1.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 32), AA
> [    0.946449] ata1.00: supports DRM functions and may not be fully accessible
> [    0.949772] ata1.00: configured for UDMA/133
> [    0.949960] scsi 0:0:0:0: Direct-Access     ATA      Samsung SSD 860  1B6Q PQ: 0 ANSI: 5
> [    0.950209] ata1.00: Enabling discard_zeroes_data
> [    0.950233] sd 0:0:0:0: Attached scsi generic sg0 type 0
> [    0.950393] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
> [    0.950419] sd 0:0:0:0: [sda] Write Protect is off
> [    0.950421] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> [    0.950446] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [    0.966359] ata1.00: Enabling discard_zeroes_data
> [    0.967056]  sda: sda1
> [    0.967202] ata1.00: Enabling discard_zeroes_data
> [    0.967288] sd 0:0:0:0: [sda] Attached SCSI disk
> [    1.023281] usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.04
> [    1.023282] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
> [    1.023668] hub 1-1:1.0: USB hub found
> [    1.023891] hub 1-1:1.0: 4 ports detected
> [    1.036022] usb 3-1: New USB device found, idVendor=413d, idProduct=2107, bcdDevice= 0.00
> [    1.036024] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
> [    1.042996] usb 2-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.04
> [    1.042998] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
> [    1.043412] hub 2-1:1.0: USB hub found
> [    1.043617] hub 2-1:1.0: 6 ports detected
> [    1.148076] usb 3-5: new full-speed USB device number 3 using xhci_hcd
> [    1.257497] ata2.00: ATA-8: TOSHIBA MQ01ABD100M, AX101U, max UDMA/100
> [    1.257509] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
> [    1.259594] ata2.00: configured for UDMA/100
> [    1.259786] scsi 1:0:0:0: Direct-Access     ATA      TOSHIBA MQ01ABD1 1U   PQ: 0 ANSI: 5
> [    1.260079] sd 1:0:0:0: Attached scsi generic sg1 type 0
> [    1.260221] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
> [    1.260222] sd 1:0:0:0: [sdb] 4096-byte physical blocks
> [    1.260250] sd 1:0:0:0: [sdb] Write Protect is off
> [    1.260252] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
> [    1.260272] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [    1.299779] usb 3-5: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=24.07
> [    1.299791] usb 3-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
> [    1.299792] usb 3-5: Product: USB Receiver
> [    1.299793] usb 3-5: Manufacturer: Logitech
> [    1.351570]  sdb: sdb1 sdb2
> [    1.352046] sd 1:0:0:0: [sdb] Attached SCSI disk
> [    1.353382] usbcore: registered new interface driver usb-storage
> [    1.354594] usbcore: registered new interface driver uas
> [    1.355543] hidraw: raw HID events driver (C) Jiri Kosina
> [    1.366061] usbcore: registered new interface driver usbhid
> [    1.366062] usbhid: USB HID core driver
> [    1.367124] input: HID 413d:2107 Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.0/0003:413D:2107.0001/input/input2
> [    1.424210] input: HID 413d:2107 Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.0/0003:413D:2107.0001/input/input3
> [    1.424436] input: HID 413d:2107 as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.0/0003:413D:2107.0001/input/input4
> [    1.424565] input: HID 413d:2107 Consumer Control as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.0/0003:413D:2107.0001/input/input5
> [    1.424746] hid-generic 0003:413D:2107.0001: input,hidraw0: USB HID v1.11 Keyboard [HID 413d:2107] on usb-0000:00:14.0-1/input0
> [    1.424854] hid-generic 0003:413D:2107.0002: hiddev0,hidraw1: USB HID v1.10 Device [HID 413d:2107] on usb-0000:00:14.0-1/input1
> [    1.424954] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5:1.0/0003:046D:C52B.0003/input/input6
> [    1.428047] usb 3-6: new high-speed USB device number 4 using xhci_hcd
> [    1.484051] tsc: Refined TSC clocksource calibration: 3192.606 MHz
> [    1.484056] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2e050166e04, max_idle_ns: 440795273449 ns
> [    1.484076] clocksource: Switched to clocksource tsc
> [    1.484290] hid-generic 0003:046D:C52B.0003: input,hidraw2: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-5/input0
> [    1.484484] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5:1.1/0003:046D:C52B.0004/input/input7
> [    1.484709] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5:1.1/0003:046D:C52B.0004/input/input8
> [    1.544205] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5:1.1/0003:046D:C52B.0004/input/input9
> [    1.544387] hid-generic 0003:046D:C52B.0004: input,hiddev1,hidraw3: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-5/input1
> [    1.544542] hid-generic 0003:046D:C52B.0005: hiddev2,hidraw4: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-5/input2
> [    1.553909] isci: Intel(R) C600 SAS Controller Driver - version 1.2.0
> [    1.585433] usb 3-6: New USB device found, idVendor=0951, idProduct=1666, bcdDevice= 0.01
> [    1.585434] usb 3-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
> [    1.585435] usb 3-6: Product: DataTraveler 3.0
> [    1.585436] usb 3-6: Manufacturer: Kingston
> [    1.585437] usb 3-6: SerialNumber: 60A44C42568CF270499008FF
> [    1.587341] usb-storage 3-6:1.0: USB Mass Storage device detected
> [    1.587564] scsi host4: usb-storage 3-6:1.0
> [    1.712079] usb 3-9: new high-speed USB device number 5 using xhci_hcd
> [    1.860448] usb 3-9: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11
> [    1.860450] usb 3-9: New USB device strings: Mfr=0, Product=1, SerialNumber=0
> [    1.860451] usb 3-9: Product: USB 2.0 Hub
> [    1.861094] hub 3-9:1.0: USB hub found
> [    1.861125] hub 3-9:1.0: 4 ports detected
> [    2.268082] usb 3-9.1: new low-speed USB device number 6 using xhci_hcd
> [    2.497655] usb 3-9.1: New USB device found, idVendor=0a81, idProduct=0205, bcdDevice= 0.10
> [    2.497657] usb 3-9.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
> [    2.497658] usb 3-9.1: Product: PS2 to USB Converter
> [    2.497659] usb 3-9.1: Manufacturer: CHESEN
> [    2.509758] input: CHESEN PS2 to USB Converter as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.1/3-9.1:1.0/0003:0A81:0205.0006/input/input11
> [    2.568307] hid-generic 0003:0A81:0205.0006: input,hidraw5: USB HID v1.10 Keyboard [CHESEN PS2 to USB Converter] on usb-0000:00:14.0-9.1/input0
> [    2.575746] input: CHESEN PS2 to USB Converter Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.1/3-9.1:1.1/0003:0A81:0205.0007/input/input12
> [    2.575974] input: CHESEN PS2 to USB Converter System Control as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.1/3-9.1:1.1/0003:0A81:0205.0007/input/input13
> [    2.604939] scsi 4:0:0:0: Direct-Access     Kingston DataTraveler 3.0      PQ: 0 ANSI: 6
> [    2.605184] sd 4:0:0:0: Attached scsi generic sg2 type 0
> [    2.605605] sd 4:0:0:0: [sdc] 120845300 512-byte logical blocks: (61.9 GB/57.6 GiB)
> [    2.605876] sd 4:0:0:0: [sdc] Write Protect is off
> [    2.605877] sd 4:0:0:0: [sdc] Mode Sense: 4f 00 00 00
> [    2.606107] sd 4:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
> [    2.622263]  sdc: sdc1 sdc2
> [    2.623542] sd 4:0:0:0: [sdc] Attached SCSI removable disk
> [    2.632233] input: CHESEN PS2 to USB Converter Consumer Control as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.1/3-9.1:1.1/0003:0A81:0205.0007/input/input14
> [    2.632424] hid-generic 0003:0A81:0205.0007: input,hidraw6: USB HID v1.10 Mouse [CHESEN PS2 to USB Converter] on usb-0000:00:14.0-9.1/input1
> [    2.832081] usb 3-9.3: new full-speed USB device number 7 using xhci_hcd
> [    3.052459] random: fast init done
> [    3.054265] usb 3-9.3: New USB device found, idVendor=feed, idProduct=3060, bcdDevice= 0.01
> [    3.054267] usb 3-9.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
> [    3.054268] usb 3-9.3: Product: PRODUCT
> [    3.054269] usb 3-9.3: Manufacturer: tshort
> [    3.054270] usb 3-9.3: SerialNumber: 0
> [    3.060893] input: tshort PRODUCT as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.3/3-9.3:1.0/0003:FEED:3060.0008/input/input15
> [    3.120294] hid-generic 0003:FEED:3060.0008: input,hidraw7: USB HID v1.11 Keyboard [tshort PRODUCT] on usb-0000:00:14.0-9.3/input0
> [    3.121732] input: tshort PRODUCT Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.3/3-9.3:1.1/0003:FEED:3060.0009/input/input16
> [    3.121956] input: tshort PRODUCT System Control as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.3/3-9.3:1.1/0003:FEED:3060.0009/input/input17
> [    3.180236] input: tshort PRODUCT Consumer Control as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.3/3-9.3:1.1/0003:FEED:3060.0009/input/input18
> [    3.180441] hid-generic 0003:FEED:3060.0009: input,hidraw8: USB HID v1.11 Mouse [tshort PRODUCT] on usb-0000:00:14.0-9.3/input1
> [    3.360081] usb 3-9.4: new high-speed USB device number 8 using xhci_hcd
> [    3.560453] usb 3-9.4: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11
> [    3.560455] usb 3-9.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
> [    3.560456] usb 3-9.4: Product: USB 2.0 Hub
> [    3.561255] hub 3-9.4:1.0: USB hub found
> [    3.561283] hub 3-9.4:1.0: 4 ports detected
> [    3.968082] usb 3-9.4.4: new full-speed USB device number 9 using xhci_hcd
> [    4.190316] usb 3-9.4.4: New USB device found, idVendor=feed, idProduct=3060, bcdDevice= 0.01
> [    4.190318] usb 3-9.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
> [    4.190329] usb 3-9.4.4: Product: PRODUCT
> [    4.190330] usb 3-9.4.4: Manufacturer: tshort
> [    4.190331] usb 3-9.4.4: SerialNumber: 0
> [    4.197132] input: tshort PRODUCT as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.4/3-9.4.4/3-9.4.4:1.0/0003:FEED:3060.000A/input/input19
> [    4.256289] hid-generic 0003:FEED:3060.000A: input,hidraw9: USB HID v1.11 Keyboard [tshort PRODUCT] on usb-0000:00:14.0-9.4.4/input0
> [    4.257800] input: tshort PRODUCT Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.4/3-9.4.4/3-9.4.4:1.1/0003:FEED:3060.000B/input/input20
> [    4.258028] input: tshort PRODUCT System Control as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.4/3-9.4.4/3-9.4.4:1.1/0003:FEED:3060.000B/input/input21
> [    4.316234] input: tshort PRODUCT Consumer Control as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.4/3-9.4.4/3-9.4.4:1.1/0003:FEED:3060.000B/input/input22
> [    4.316428] hid-generic 0003:FEED:3060.000B: input,hidraw10: USB HID v1.11 Mouse [tshort PRODUCT] on usb-0000:00:14.0-9.4.4/input1
> [   10.414444] random: crng init done
> [   13.195942] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
> [   13.567990] shepherd[1]: Service root has been started.
> [   13.787990] shepherd[1]: starting services...
> [   13.788376] shepherd[1]: Service root-file-system has been started.
> [   13.788654] shepherd[1]: Service user-file-systems has been started.
> [   13.792316] shepherd[1]: waiting for udevd...
> [   13.813925] udevd[232]: starting version 3.2.9
> [   13.880374] udevd[232]: starting eudev-3.2.9
> [   14.293131] udevd[232]: no sender credentials received, message ignored
> [   14.419105] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
> [   14.419106] snd_hda_intel 0000:01:00.1: Force to non-snoop mode
> [   14.476770] [drm:amdgpu_init [amdgpu]] *ERROR* VGACON disables amdgpu kernel modesetting.
> [   14.525898] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input23
> [   14.529733] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC662 rev3: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
> [   14.529734] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=1 (0x15/0x0/0x0/0x0/0x0)
> [   14.529735] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
> [   14.529736] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
> [   14.529736] snd_hda_codec_realtek hdaudioC0D0:    inputs:
> [   14.529738] snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
> [   14.529738] snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
> [   14.529739] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
> [   14.536102] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input24
> [   14.540250] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input25
> [   14.547711] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIO) (20190816/utaddress-213)
> [   14.547715] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
> [   14.547718] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20190816/utaddress-213)
> [   14.547719] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
> [   14.547720] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20190816/utaddress-213)
> [   14.547722] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20190816/utaddress-213)
> [   14.547723] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
> [   14.547724] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20190816/utaddress-213)
> [   14.547725] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20190816/utaddress-213)
> [   14.547727] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
> [   14.547727] lpc_ich: Resource conflict(s) found affecting gpio_ich
> [   14.557280] libphy: r8169: probed
> [   14.557437] r8169 0000:03:00.0 eth0: RTL8168g/8111g, 44:8a:5b:75:32:93, XID 4c0, IRQ 32
> [   14.557438] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
> [   14.572561] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
> [   14.572786] input: PC Speaker as /devices/platform/pcspkr/input/input30
> [   14.590837] cryptd: max_cpu_qlen set to 1000
> [   14.596682] AVX2 version of gcm_enc/dec engaged.
> [   14.596683] AES CTR mode by8 optimization enabled
> [   14.629383] iTCO_vendor_support: vendor-support=0
> [   14.630078] r8169 0000:03:00.0 enp3s0: renamed from eth0
> [   14.630861] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
> [   14.630895] iTCO_wdt: Found a Lynx Point TCO device (Version=2, TCOBASE=0x1860)
> [   14.631064] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
> [   14.635018] intel-spi intel-spi: mx25l6405d (8192 Kbytes)
> [   14.636336] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input26
> [   14.636373] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input27
> [   14.636405] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input28
> [   14.636433] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input29
> [   14.640146] logitech-djreceiver 0003:046D:C52B.0005: hiddev1,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-5/input2
> [   14.646863] Error: Driver 'pcspkr' is already registered, aborting...
> [   14.663737] Creating 1 MTD partitions on "intel-spi":
> [   14.663740] 0x000000000000-0x000000800000 : "BIOS"
> [   14.762768] input: Logitech Unifying Device. Wireless PID:1028 Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5:1.2/0003:046D:C52B.0005/0003:046D:1028.000C/input/input31
> [   14.763093] hid-generic 0003:046D:1028.000C: input,hidraw3: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:1028] on usb-0000:00:14.0-5/input2:1
> [   14.802345] input: Logitech M570 as /devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5:1.2/0003:046D:C52B.0005/0003:046D:1028.000C/input/input35
> [   14.802632] logitech-hidpp-device 0003:046D:1028.000C: input,hidraw3: USB HID v1.11 Mouse [Logitech M570] on usb-0000:00:14.0-5/input2:1
> [   14.887407] intel_rapl_common: Found RAPL domain package
> [   14.887408] intel_rapl_common: Found RAPL domain core
> [   14.887409] intel_rapl_common: Found RAPL domain dram
> [   14.887413] intel_rapl_common: RAPL package-0 domain package locked by BIOS
> [   14.887415] intel_rapl_common: RAPL package-0 domain dram locked by BIOS
> [   15.268906] shepherd[1]: Service udev has been started.
> [   15.429340] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
> [   15.429777] shepherd[1]: Service file-system-/media has been started.
> [   15.734747] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
> [   15.735175] shepherd[1]: Service file-system-/backup has been started.
> [   15.735655] shepherd[1]: Service file-system-/dev/pts has been started.
> [   15.736088] shepherd[1]: Service file-system-/dev/shm has been started.
> [   15.736486] shepherd[1]: Service file-system-/gnu/store has been started.
> [   15.736892] shepherd[1]: Service file-system-/run/systemd has been started.
> [   15.737307] shepherd[1]: Service file-system-/run/user has been started.
> [   15.737671] shepherd[1]: Service file-system-/sys/fs/cgroup has been started.
> [   15.738130] shepherd[1]: Service file-system-/sys/fs/cgroup/elogind has been started.
> [   15.756532] shepherd[1]: Service file-system-/sys/fs/cgroup/cpuset has been started.
> [   15.757135] shepherd[1]: Service file-system-/sys/fs/cgroup/cpu has been started.
> [   15.757613] shepherd[1]: Service file-system-/sys/fs/cgroup/cpuacct has been started.
> [   15.758236] shepherd[1]: Service file-system-/sys/fs/cgroup/memory has been started.
> [   15.758678] shepherd[1]: Service file-system-/sys/fs/cgroup/devices has been started.
> [   15.759125] shepherd[1]: Service file-system-/sys/fs/cgroup/freezer has been started.
> [   15.759616] shepherd[1]: Service file-system-/sys/fs/cgroup/blkio has been started.
> [   15.760071] shepherd[1]: Service file-system-/sys/fs/cgroup/perf_event has been started.
> [   15.760497] shepherd[1]: Service file-system-/sys/fs/cgroup/pids has been started.
> [   15.761198] shepherd[1]: Service file-system-/var/cache/fontconfig has been started.
> [   15.761453] shepherd[1]: Service file-systems has been started.
> [   15.763771] shepherd[1]: Service user-homes has been started.
> [   15.765839] shepherd[1]: Service urandom-seed has been started.
> [   15.766120] shepherd[1]: Service user-processes has been started.
> [   15.766424] shepherd[1]: Service host-name has been started.
> [   15.766717] shepherd[1]: Service user-homes has been started.
> [   16.769000] shepherd[1]: Service nscd has been started.
> [   16.769926] shepherd[1]: Service guix-daemon has been started.
> [   19.765215] 0000:03:00.0: Missing Free firmware (non-Free firmware loading is disabled)
> [   19.765811] r8169 0000:03:00.0: Unable to load firmware /*(DEBLOBBED)*/ (-2)
> [   19.765898] Generic FE-GE Realtek PHY r8169-300:00: attached PHY driver [Generic FE-GE Realtek PHY] (mii_bus:phy_addr=r8169-300:00, irq=IGNORE)
> [   19.864888] r8169 0000:03:00.0 enp3s0: Link is Down
> [   22.359894] r8169 0000:03:00.0 enp3s0: Link is Up - 1Gbps/Full - flow control rx/tx
> [   22.359903] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready