GNU bug report logs - #37210
[sr #109945] Removed a USB device after wiping its partition but before exiting

Package: parted;

Reported by: anonymous <INVALID.NOREPLY <at> gnu.org>

Date: Wed, 28 Aug 2019 14:38:01 UTC

Severity: normal

To reply to this bug, email your comments to 37210 AT debbugs.gnu.org.

Toggle the display of automated, internal messages from the tracker.

View this report as an mbox folder, status mbox, maintainer mbox

Report forwarded to bug-parted <at> gnu.org:
bug#37210; Package parted. (Wed, 28 Aug 2019 14:38:01 GMT) Full text and rfc822 format available.

Acknowledgement sent to anonymous <INVALID.NOREPLY <at> gnu.org>:
New bug report received and forwarded. Copy sent to bug-parted <at> gnu.org. (Wed, 28 Aug 2019 14:38:02 GMT) Full text and rfc822 format available.

Message #5 received at submit <at> debbugs.gnu.org (full text, mbox):

From: anonymous <INVALID.NOREPLY <at> gnu.org>
To: sevenbrokenbricks <at> gmail.com, bug-parted <at> gnu.org
Subject: [sr #109945] Removed a USB device after wiping its partition but
 before exiting
Date: Wed, 28 Aug 2019 02:36:19 -0400 (EDT)

URL:
  <https://savannah.gnu.org/support/?109945>

                 Summary: Removed a USB device after wiping its partition but
before exiting
                 Project: GNU Parted
            Submitted by: None
            Submitted on: Wed 28 Aug 2019 06:36:17 AM UTC
                Category: None
                Priority: 5 - Normal
                Severity: 1 - Wish
                  Status: None
                 Privacy: Public
             Assigned to: None
        Originator Email: sevenbrokenbricks <at> gmail.com
             Open/Closed: Open
         Discussion Lock: Any
        Operating System: GNU/Linux

    _______________________________________________________

Details:

(parted) print devices                                                    
/dev/sda (500GB)
/dev/sdb (500GB)
/dev/sdc (1000GB)
/dev/sr0 (2097MB)
/dev/sdd (73.4MB)
(parted) select /dev/sdd
Using /dev/sdd
(parted) print                                                            
Model:  USB DISK Pro (scsi)
Disk /dev/sdd: 73.4MB
Sector size (logical/physical): 512B/512B
Partition Table: loop
Disk Flags: 

Number  Start  End     Size    File system  Flags
 1      0.00B  73.4MB  73.4MB  fat16

(parted) rm 1                                                             
Warning: Partition /dev/sdd is being used. Are you sure you want to continue?
Yes/No? y                                                                 
(parted) print                                                            
Model:  USB DISK Pro (scsi)
Disk /dev/sdd: 73.4MB
Sector size (logical/physical): 512B/512B
Partition Table: loop
Disk Flags: 

Number  Start  End  Size  File system  Flags

(parted) print devices                                                    
/dev/sdc (1000GB)
/dev/sdd (73.4MB)
/dev/sda (500GB)
/dev/sdb (500GB)
/dev/sr0 (2097MB)
Error: Error opening /dev/sdd: No medium found
Retry/Cancel? c                                                           
(parted) exit                                                             
  align-check TYPE N                        check partition N for
TYPE(min|opt)
        alignment
  help [COMMAND]                           print general help, or help on
COMMAND
  mklabel,mktable LABEL-TYPE               create a new disklabel (partition
table)
  mkpart PART-TYPE [FS-TYPE] START END     make a partition
  name NUMBER NAME                         name partition NUMBER as NAME
  print [devices|free|list,all|NUMBER]     display the partition table,
available
        devices, free space, all found partitions, or a particular partition
  quit                                     exit program
  rescue START END                         rescue a lost partition near START
and
        END
  resizepart NUMBER END                    resize partition NUMBER
  rm NUMBER                                delete partition NUMBER
  select DEVICE                            choose the device to edit
  disk_set FLAG STATE                      change the FLAG on selected device
  disk_toggle [FLAG]                       toggle the state of FLAG on
selected
        device
  set NUMBER FLAG STATE                    change the FLAG on partition
NUMBER
  toggle [NUMBER [FLAG]]                   toggle the state of FLAG on
partition
        NUMBER
  unit UNIT                                set the default unit to UNIT
  version                                  display the version number and
copyright
        information of GNU Parted
(parted) quit                                                             


You found a bug in GNU Parted! Here's what you have to do:

Don't panic! The bug has most likely not affected any of your data.
Help us to fix this bug by doing the following:

Check whether the bug has already been fixed by checking
the last version of GNU Parted that you can find at:

	http://ftp.gnu.org/gnu/parted/

Please check this version prior to bug reporting.

If this has not been fixed yet or if you don't know how to check,
please visit the GNU Parted website:

	http://www.gnu.org/software/parted

for further information.

Your report should contain the version of this release (3.2)
along with the error message below, the output of

	parted DEVICE unit co print unit s print

and the following history of commands you entered.
Also include any additional information about your setup you
consider important.

Command History:
help
print devices
print all
print devices
help
print
print all
select /dev/sdb
print
rm 1
select /dev/sdc
print
rm 1
print devices
select /dev/sdd
print
rm 1
y
print
print devices
c
exit
quit

Error: SEGV_MAPERR (Address not mapped to object)
Backtrace has 9 calls on stack:
  9: /lib/x86_64-linux-gnu/libparted.so.2(ped_assert+0x45) [0x7f01bc422c45]
  8: parted(+0xbc7b) [0x55b4946c9c7b]
  7: /lib/x86_64-linux-gnu/libc.so.6(+0x43f60) [0x7f01bc1f2f60]
  6: parted(+0x8ad1) [0x55b4946c6ad1]
  5: parted(+0x8bbf) [0x55b4946c6bbf]
  4: parted(interactive_mode+0x12c) [0x55b4946cbecc]
  3: parted(main+0x13ab) [0x55b4946c4deb]
  2: /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xeb) [0x7f01bc1d5b6b]
  1: parted(_start+0x2a) [0x55b4946c4e7a]


You found a bug in GNU Parted! Here's what you have to do:

Don't panic! The bug has most likely not affected any of your data.
Help us to fix this bug by doing the following:

Check whether the bug has already been fixed by checking
the last version of GNU Parted that you can find at:

	http://ftp.gnu.org/gnu/parted/

Please check this version prior to bug reporting.

If this has not been fixed yet or if you don't know how to check,
please visit the GNU Parted website:

	http://www.gnu.org/software/parted

for further information.

Your report should contain the version of this release (3.2)
along with the error message below, the output of

	parted DEVICE unit co print unit s print

and the following history of commands you entered.
Also include any additional information about your setup you
consider important.

Assertion (0) at ../../parted/ui.c:356 in function sa_sigsegv_handler()
failed.

Aborted





    _______________________________________________________

Reply to this item at:

  <https://savannah.gnu.org/support/?109945>

_______________________________________________
  Message sent via Savannah
  https://savannah.gnu.org/

Information forwarded to bug-parted <at> gnu.org:
bug#37210; Package parted. (Wed, 13 Nov 2019 00:56:02 GMT) Full text and rfc822 format available.

Message #8 received at submit <at> debbugs.gnu.org (full text, mbox):

From: "Brian C. Lane" <INVALID.NOREPLY <at> gnu.org>
To: "Brian C. Lane" <bcl <at> redhat.com>, sevenbrokenbricks <at> gmail.com,
 bug-parted <at> gnu.org
Subject: [sr #109945] Removed a USB device after wiping its partition but
 before exiting
Date: Tue, 12 Nov 2019 19:40:42 -0500 (EST)

Update of sr #109945 (project parted):

                  Status:                    None => Invalid                
             Open/Closed:                    Open => Closed                 

    _______________________________________________________

Follow-up Comment #1:

I would suggest not doing that. I don't think it's a situation we should be
expected to handle cleanly.


    _______________________________________________________

Reply to this item at:

  <https://savannah.gnu.org/support/?109945>

_______________________________________________
  Message sent via Savannah
  https://savannah.gnu.org/

This bug report was last modified 5 years and 216 days ago.

Previous Next

GNU bug tracking system
Copyright (C) 1999 Darren O. Benham, 1997,2003 nCipher Corporation Ltd, 1994-97 Ian Jackson.

GNU bug report logs - #37210 [sr #109945] Removed a USB device after wiping its partition but before exiting

GNU bug report logs - #37210
[sr #109945] Removed a USB device after wiping its partition but before exiting