Subject: Error building installation ISO

From: mikadoZero <[email-masked]>
Date: Tue, 02 Apr 2019 20:27:29 -0400

I am trying to build an installation ISO so I can test the graphical
installer.  I am building an installation ISO on a x86_64 Guix System
for a i686 machine.

`git describe`
v0.16.0-4215-g1aa662b309

I get an error when I run this command:

`guix system disk-image --file-system-type=iso9660 -s i686-linux \
      gnu/system/install.scm`

Below is all the output I have from the running the above command.

[    0.000000] Linux version 5.0.5-gnu (nixbld@) (gcc version 7.4.0 (GCC)) #1 SMP 1
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Hygon HygonGenuine
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] x86/fpu: x87 FPU will use FXSAVE
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001ffdffff] usable
[    0.000000] BIOS-e820: [mem 0x000000001ffe0000-0x000000001fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-0-ga698c
8995f-prebuilt.qemu.org 04/01/2014                                                 
[    0.000000] last_pfn = 0x1ffe0 max_arch_pfn = 0x1000000
[    0.000000] Disabled
[    0.000000] x86/PAT: MTRRs disabled, skipping PAT initialization too.
[    0.000000] x86/PAT: Configuration [0-7]: WB  WT  UC- UC  WB  WT  UC- UC  
[    0.000000] found SMP MP-table at [mem 0x000f58a0-0x000f58af] mapped at [(ptrval)
]                                                                                  
[    0.000000] check: Scanning 1 areas for low memory corruption
[    0.000000] RAMDISK: [mem 0x1f610000-0x1ffdffff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F56B0 000014 (v00 BOCHS )
[    0.000000] ACPI: RSDT 0x000000001FFE156F 000030 (v01 BOCHS  BXPCRSDT 00000001 BX
PC 00000001)                                                                       
[    0.000000] ACPI: FACP 0x000000001FFE144B 000074 (v01 BOCHS  BXPCFACP 00000001 BX
PC 00000001)                                                                       
[    0.000000] ACPI: DSDT 0x000000001FFE0040 00140B (v01 BOCHS  BXPCDSDT 00000001 BX
PC 00000001)                                                                       
[    0.000000] ACPI: FACS 0x000000001FFE0000 000040
[    0.000000] ACPI: APIC 0x000000001FFE14BF 000078 (v01 BOCHS  BXPCAPIC 00000001 BX
PC 00000001)                                                                       
[    0.000000] ACPI: HPET 0x000000001FFE1537 000038 (v01 BOCHS  BXPCHPET 00000001 BX
PC 00000001)                                                                       
[    0.000000] 0MB HIGHMEM available.
[    0.000000] 511MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 1ffe0000
[    0.000000]   low ram: 0 - 1ffe0000
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   Normal   [mem 0x0000000001000000-0x000000001ffdffff]
[    0.000000]   HighMem  empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000001ffdffff]
[    0.000000] Zeroed struct page in unavailable ranges: 98 pages
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000001ffdffff]
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x608
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] [mem 0x20000000-0xfffbffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff
, max_idle_ns: 7645519600211568 ns                                                 
[    0.000000] random: get_random_bytes called from start_kernel+0x81/0x479 with crn
g_init=0                                                                           
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
[    0.000000] percpu: Embedded 30 pages/cpu @(ptrval) s94028 r0 d28852 u122880
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 129662
[    0.000000] Kernel command line: panic=1 --load=/gnu/store/c25clavjwl9gj2i0z41j3l
56q4zbhcxb-linux-vm-loader console=ttyS0                                           
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (00000000:00000000)
[    0.000000] Memory: 426348K/523768K available (9093K kernel code, 895K rwdata, 35
12K rodata, 1168K init, 796K bss, 97420K reserved, 0K cma-reserved, 0K highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff14000 - 0xfffff000   ( 940 kB)
[    0.000000]   cpu_entry : 0xffa00000 - 0xffb31000   (1220 kB)
[    0.000000]     pkmap   : 0xff600000 - 0xff800000   (2048 kB)
[    0.000000]     vmalloc : 0xe07e0000 - 0xff5fe000   ( 494 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xdffe0000   ( 511 MB)
[    0.000000]       .init : 0xc3d45000 - 0xc3e69000   (1168 kB)
[    0.000000]       .data : 0xc38e1770 - 0xc3d31c00   (4417 kB)
[    0.000000]       .text : 0xc3000000 - 0xc38e1770   (9093 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode
...Ok.                                                                             
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] ftrace: allocating 38030 entries in 75 pages
[    0.000000] rcu: Hierarchical RCU implementation.
[    0.000000] rcu:     RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies
.                                                                                  
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[    0.000000] NR_IRQS: 2304, nr_irqs: 256, preallocated irqs: 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] printk: console [ttyS0] enabled
[    0.000000] ACPI: Core revision 20181213
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_
ns: 19112604467 ns                                                                 
[    0.008000] APIC: Switch to symmetric I/O mode setup
[    0.008000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.020000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.052000] tsc: Unable to calibrate against PIT
[    0.052000] tsc: using HPET reference calibration
[    0.052000] tsc: Detected 1839.218 MHz processor
[    0.004561] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x3505c3
06697, max_idle_ns: 881590419905 ns                                                
[    0.007484] Calibrating delay loop (skipped), value calculated using timer freque
ncy.. 3678.43 BogoMIPS (lpj=7356872)                                               
[    0.009239] pid_max: default: 32768 minimum: 301
[    0.010451] LSM: Security Framework initializing
[    0.010864] Yama: becoming mindful.
[    0.016158] AppArmor: AppArmor initialized
[    0.022202] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.022573] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.066912] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.067549] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.068529] Spectre V2 : Mitigation: Full generic retpoline
[    0.069104] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on conte
xt switch                                                                          
[    0.070159] Speculative Store Bypass: Vulnerable

[    0.414451] smpboot: CPU0: Intel QEMU Virtual CPU version 2.5+ (family: 0x6, mode

[    0.423918] Performance Events: PMU not available due to virtualization, using so
ftware events only.                                                                
[    0.426451] rcu: Hierarchical SRCU implementation.
[    0.444809] NMI watchdog: Perf NMI watchdog permanently disabled
[    0.453008] smp: Bringing up secondary CPUs ...
[    0.453699] smp: Brought up 1 node, 1 CPU
[    0.454613] smpboot: Max logical packages: 1
[    0.455226] smpboot: Total of 1 processors activated (3678.43 BogoMIPS)
[    0.468584] allocated 524288 bytes of page_ext
[    0.487181] devtmpfs: initialized
[    0.511158] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_id
le_ns: 7645041785100000 ns                                                         
[    0.512499] futex hash table entries: 256 (order: 2, 16384 bytes)
[    0.522045] pinctrl core: initialized pinctrl subsystem
[    0.541941] RTC time: 16:14:34, date: 2019-04-02
[    0.555235] NET: Registered protocol family 16
[    0.563567] audit: initializing netlink subsys (disabled)
[    0.571344] audit: type=2000 audit(1554221673.620:1): state=initialized audit_ena
bled=0 res=1                                                                       
[    0.577810] EISA bus registered
[    0.578924] cpuidle: using governor ladder
[    0.579787] cpuidle: using governor menu
[    0.583576] ACPI: bus type PCI registered
[    0.584317] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.595123] PCI: PCI BIOS revision 2.10 entry at 0xfd1f9, last bus=0
[    0.595930] PCI: Using configuration type 1 for base access

[    0.689072] ACPI: Added _OSI(Module Device)
[    0.689626] ACPI: Added _OSI(Processor Device)
[    0.690070] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.690451] ACPI: Added _OSI(Processor Aggregator Device)
[    0.690824] ACPI: Added _OSI(Linux-Dell-Video)
[    0.691290] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.691807] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.737973] ACPI: 1 ACPI AML tables successfully acquired and loaded
[    0.782217] ACPI: Interpreter enabled
[    0.791883] ACPI: (supports S0 S3 S4 S5)
[    0.792479] ACPI: Using IOAPIC for interrupt routing
[    0.794724] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocr
s" and report a bug                                                                
[    0.801827] ACPI: Enabled 2 GPEs in block 00 to 0F

[    0.922451] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
[    0.923864] acpi PNP0A03:00: fail to add MMCONFIG information, can't access exten
ded PCI configuration space under this bridge.                                     
[    0.945972] acpiphp: Slot [3] registered
[    0.947081] acpiphp: Slot [4] registered
[    0.947926] acpiphp: Slot [5] registered
[    0.948813] acpiphp: Slot [6] registered
[    0.949634] acpiphp: Slot [7] registered
[    0.950961] acpiphp: Slot [8] registered
[    0.951865] acpiphp: Slot [9] registered
[    0.952746] acpiphp: Slot [10] registered
[    0.953676] acpiphp: Slot [11] registered
[    0.955053] acpiphp: Slot [12] registered
[    0.955904] acpiphp: Slot [13] registered
[    0.956790] acpiphp: Slot [14] registered
[    0.957625] acpiphp: Slot [15] registered
[    0.958832] acpiphp: Slot [16] registered
[    0.959650] acpiphp: Slot [17] registered
[    0.960438] acpiphp: Slot [18] registered
[    0.961296] acpiphp: Slot [19] registered
[    0.962082] acpiphp: Slot [20] registered
[    0.963082] acpiphp: Slot [21] registered
[    0.963892] acpiphp: Slot [22] registered
[    0.964728] acpiphp: Slot [23] registered
[    0.965533] acpiphp: Slot [24] registered
[    0.966753] acpiphp: Slot [25] registered
[    0.967585] acpiphp: Slot [26] registered
[    0.968378] acpiphp: Slot [27] registered
[    0.969233] acpiphp: Slot [28] registered
[    0.970026] acpiphp: Slot [29] registered
[    0.970991] acpiphp: Slot [30] registered
[    0.971864] acpiphp: Slot [31] registered
[    0.973107] PCI host bridge to bus 0000:00
[    0.973979] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.974585] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.975333] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.976059] pci_bus 0000:00: root bus resource [mem 0x20000000-0xfebfffff window]
[    0.976834] pci_bus 0000:00: root bus resource [mem 0x100000000-0x17fffffff windo
w]                                                                                 
[    0.978588] pci_bus 0000:00: root bus resource [bus 00-ff]
[    1.011589] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    1.012497] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    1.013249] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    1.014671] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    1.020987] pci 0000:00:01.3: quirk: [io  0x0600-0x063f] claimed by PIIX4 ACPI
[    1.021853] pci 0000:00:01.3: quirk: [io  0x0700-0x070f] claimed by PIIX4 SMB

[    1.206451] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[    1.210870] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[    1.213357] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[    1.214451] ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
[    1.234958] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    1.235888] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+me
m,locks=none                                                                       
[    1.236917] pci 0000:00:02.0: vgaarb: bridge control possible
[    1.237815] vgaarb: loaded
[    1.249761] SCSI subsystem initialized
[    1.254932] ACPI: bus type USB registered
[    1.256418] usbcore: registered new interface driver usbfs
[    1.257836] usbcore: registered new interface driver hub
[    1.259485] usbcore: registered new device driver usb
[    1.264075] EDAC MC: Ver: 3.0.0
[    1.277200] PCI: Using ACPI for IRQ routing
[    1.300868] NetLabel: Initializing
[    1.301314] NetLabel:  domain hash size = 128
[    1.301761] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    1.306876] NetLabel:  unlabeled traffic allowed by default
[    1.320168] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    1.321605] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    1.322547] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
[    1.333998] clocksource: Switched to clocksource tsc-early

[    1.730370] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.742937] AppArmor: AppArmor Filesystem Enabled
[    1.745478] pnp: PnP ACPI init
[    1.763059] pnp: PnP ACPI: found 6 devices
[    1.763709] PnPBIOS: Disabled
[    1.869786] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_n

[    1.870553] NET: Registered protocol family 2
[    1.893030] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 byte
s)                                                                                 
[    1.894135] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[    1.895915] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[    1.896959] TCP: Hash tables configured (established 4096 bind 4096)
[    1.900731] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    1.901821] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    1.907239] NET: Registered protocol family 1
[    1.908804] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[    1.909744] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[    1.911011] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[    1.912324] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0
x000dffff]                                                                         
[    1.926232] Trying to unpack rootfs image as initramfs...

[    5.060084] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    5.060824] software IO TLB: mapped [mem 0x1ac0f000-0x1ec0f000] (64MB)
[    5.065524] check: Scanning for low memory corruption every 60 seconds
[    5.083746] Initialise system trusted keyrings
[    5.088016] workingset: timestamp_bits=14 max_order=17 bucket_order=3
[    5.136532] zbud: loaded
[    5.160954] Allocating IMA blacklist keyring.

[    5.283793] Asymmetric key parser 'x509' registered
[    5.284820] bounce: pool size: 64 pages
[    5.285990] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    5.297078] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    5.305896] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    5.312370] ACPI: Power Button [PWRF]
[    5.322258] isapnp: Scanning for PnP cards...

[    5.684747] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    5.713473] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A

[    5.954252] brd: module loaded
[    6.005154] loop: module loaded
[    6.040356] scsi host0: ata_piix
[    6.047852] scsi host1: ata_piix
[    6.050075] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc0a0 irq 14
[    6.050728] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc0a8 irq 15
[    6.067918] libphy: Fixed MDIO Bus: probed
[    6.068510] tun: Universal TUN/TAP device driver, 1.6
[    6.071268] PPP generic driver version 2.4.2
[    6.073978] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    6.075514] ehci-pci: EHCI PCI platform driver
[    6.076695] ehci-platform: EHCI generic platform driver
[    6.077600] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    6.078433] ohci-pci: OHCI PCI platform driver
[    6.080073] ohci-platform: OHCI generic platform driver
[    6.081030] uhci_hcd: USB Universal Host Controller Interface driver
[    6.086240] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 ir
q 1,12                                                                             
[    6.091833] tsc: Refined TSC clocksource calibration: 1839.374 MHz
[    6.093161] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3506e981182,
 max_idle_ns: 881590631235 ns                                                      
[    6.098985] serio: i8042 KBD port at 0x60,0x64 irq 1
[    6.099812] clocksource: Switched to clocksource tsc
[    6.101329] serio: i8042 AUX port at 0x60,0x64 irq 12
[    6.108809] mousedev: PS/2 mouse device common for all mice
[    6.124638] rtc_cmos 00:00: RTC can wake from S4
[    6.129147] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0
/input/input1                                                                      
[    6.141911] rtc_cmos 00:00: registered as rtc0
[    6.145701] rtc_cmos 00:00: alarms up to one day, y3k, 114 bytes nvram, hpet irqs
[    6.147426] i2c /dev entries driver
[    6.151713] device-mapper: uevent: version 1.0.3
[    6.156635] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel
@redhat.com                                                                        
[    6.159304] platform eisa.0: Probing EISA bus 0
[    6.160678] platform eisa.0: EISA: Cannot allocate resource for mainboard
[    6.161729] platform eisa.0: Cannot allocate resource for EISA slot 1
[    6.162605] platform eisa.0: Cannot allocate resource for EISA slot 2
[    6.165297] platform eisa.0: Cannot allocate resource for EISA slot 3
[    6.166045] platform eisa.0: Cannot allocate resource for EISA slot 4
[    6.167496] platform eisa.0: Cannot allocate resource for EISA slot 5
[    6.168211] platform eisa.0: Cannot allocate resource for EISA slot 6
[    6.168873] platform eisa.0: Cannot allocate resource for EISA slot 7
[    6.169531] platform eisa.0: Cannot allocate resource for EISA slot 8
[    6.170285] platform eisa.0: EISA: Detected 0 cards
[    6.172040] cpufreq_nforce2: No nForce2 chipset
[    6.173739] ledtrig-cpu: registered to indicate activity on CPUs
[    6.185284] NET: Registered protocol family 10
[    6.211937] Segment Routing with IPv6
[    6.213534] NET: Registered protocol family 17
[    6.216954] Key type dns_resolver registered
[    6.217648] mce: Unable to init MCE device (rc: -5)
[    6.227844] Using IPI No-Shortcut mode
[    6.235527] sched_clock: Marking stable (6288273622, -53548389)->(6366603175, -13
1877942)                                                                           
[    6.244744] ata2.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
[    6.253723] registered taskstats version 1
[    6.254364] Loading compiled-in X.509 certificates
[    6.258116] zswap: loaded using pool lzo/zbud
[    6.299948] scsi 1:0:0:0: CD-ROM            QEMU     QEMU DVD-ROM     2.5+ PQ: 0 
ANSI: 5                                                                            
[    6.344567] Key type big_key registered
[    6.356238] sr 1:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
[    6.357393] cdrom: Uniform CD-ROM driver Revision: 3.20
[    6.375914] sr 1:0:0:0: Attached scsi generic sg0 type 5
[    6.380037] Key type trusted registered
[    6.389854] Key type encrypted registered
[    6.390578] AppArmor: AppArmor sha1 policy hashing enabled
[    6.392760] ima: No TPM chip found, activating TPM-bypass!
[    6.393767] ima: Allocated hash algorithm: sha1
[    6.399765] No architecture policies found
[    6.401089] evm: Initialising EVM extended attributes:
[    6.401640] evm: security.selinux
[    6.402034] evm: security.SMACK64
[    6.402370] evm: security.SMACK64EXEC
[    6.402754] evm: security.SMACK64TRANSMUTE
[    6.403537] evm: security.SMACK64MMAP
[    6.403902] evm: security.apparmor
[    6.404221] evm: security.ima
[    6.404505] evm: security.capability
[    6.404884] evm: HMAC attrs: 0x1
[    6.413376]   Magic number: 15:2:236
[    6.416474] rtc_cmos 00:00: setting system clock to 2019-04-02T16:14:40 UTC (1554
221680)                                                                            

[    6.811999] Write protecting kernel text and read-only data: 12612k
[    6.813762] Run /init as init process

GC Warning: Couldn't read /proc/stat
Welcome, this is GNU's early boot Guile.
Use '--repl' for an initrd REPL.

loading kernel modules...

[    9.740850] usbcore: registered new interface driver uas

[    9.838290] usbcore: registered new interface driver usbhid
[    9.839084] usbhid: USB HID core driver

[   13.856342] random: fast init done
[   13.862152] random: crng init done
[   13.931702] FS-Cache: Loaded
[   13.983692] 9pnet: Installing 9P2000 support
[   13.999778] 9p: Installing v9fs 9p2000 file system support
[   14.001881] FS-Cache: Netfs '9p' registered for caching
configuring QEMU networking...
loading '/gnu/store/c25clavjwl9gj2i0z41j3l56q4zbhcxb-linux-vm-loader'...
environment variable `PATH' set to `/gnu/store/zx1bx7j3qg9nxhpvzls9q3r5vnkp4pby-qemu
-minimal-3.1.0/bin:/gnu/store/gc13wf16xhga1kay3bsfarhff80gn1b9-parted-3.2/sbin:/gnu/
store/lijbb2wlbbrsjhi9q0k96qzw9gc0fqad-e2fsprogs-1.44.5/bin:/gnu/store/lijbb2wlbbrsj
hi9q0k96qzw9gc0fqad-e2fsprogs-1.44.5/sbin:/gnu/store/jfamfqj0mlvx18rq9vghnhrlllq0va6
s-dosfstools-4.1/sbin:/gnu/store/4g0076p66naxz981qbrqj6z3r2hmqj86-xorriso-1.5.0/bin:
/gnu/store/8xbafv94378vynmdvvhcpn7rhn91cf76-sed-4.5/bin:/gnu/store/60sr1nkjinl5diya6
36i4793rvyc2w7r-grep-3.1/bin:/gnu/store/g4hl3s1icvpridim821nawdnhls6wrh2-coreutils-8
.30/bin:/gnu/store/fa5kzl0lajl9q12wxbbjrxxxal1dmf74-findutils-4.6.0/bin:/gnu/store/q

registering closures...
registering 416 items  [###########                                           ][  71
7.515012] clocksource: timekeeping watchdog on CPU0: Marking clocksource 'tsc' as un

[  717.518288] clocksource:                       'hpet' wd_now: b7e5f432 wd_last: b
48b89ef mask: ffffffff                                                             
[  717.521921] clocksource:                       'tsc' cs_now: 134f45b5875 cs_last:
 134bfb9fb0f mask: ffffffffffffffff                                                
[  717.592943] tsc: Marking TSC unstable due to clocksource watchdog
[  717.594218] TSC found unstable after boot, most likely due to broken BIOS. Use 't
sc=unstable'.                                                                      
[  717.597754] sched_clock: Marking unstable (717647672657, -53598507)<-(71772595108
3, -131877942)                                                                     
[  717.667328] clocksource: Switched to clocksource hpet
registering 416 items
Backtrace:
           1 (primitive-load "/gnu/store/53hbw8dg30r7i30avhmf6fqdb7y?")
           0 (scm-error misc-error #f "~A ~S" ("did not find a s?" ?) ?)

ERROR: In procedure scm-error:
did not find a single result file ()
environment variable `PATH' set to `/gnu/store/zx1bx7j3qg9nxhpvzls9q3r5vnkp4pby-qemu
-minimal-3.1.0/bin:/gnu/store/g4hl3s1icvpridim821nawdnhls6wrh2-coreutils-8.30/bin' 
builder for `/gnu/store/hczj9cppw20xklpz2igg6pm295a06nz6-image.iso.drv' failed with 
exit code 1                                                                        
build of /gnu/store/hczj9cppw20xklpz2igg6pm295a06nz6-image.iso.drv failed
View build log at '/var/log/guix/drvs/hc/zj9cppw20xklpz2igg6pm295a06nz6-image.iso.dr
v.bz2'.                                                                            
guix system: error: build of `/gnu/store/hczj9cppw20xklpz2igg6pm295a06nz6-image.iso.
drv' failed