Package: guix;
Reported by: Chris Marusich <cmmarusich <at> gmail.com>
Date: Tue, 10 Apr 2018 08:25:01 UTC
Severity: normal
To reply to this bug, email your comments to 31119 AT debbugs.gnu.org.
Toggle the display of automated, internal messages from the tracker.
View this report as an mbox folder, status mbox, maintainer mbox
bug-guix <at> gnu.org:bug#31119; Package guix.
(Tue, 10 Apr 2018 08:25:01 GMT) Full text and rfc822 format available.Chris Marusich <cmmarusich <at> gmail.com>:bug-guix <at> gnu.org.
(Tue, 10 Apr 2018 08:25:02 GMT) Full text and rfc822 format available.Message #5 received at submit <at> debbugs.gnu.org (full text, mbox):
From: Chris Marusich <cmmarusich <at> gmail.com> To: bug-guix <at> gnu.org Subject: make check-system fails: kernel panic Date: Mon, 09 Apr 2018 23:32:46 -0700
[Message part 1 (text/plain, inline)]
Hi,
At commit df154c05dc65025eac2d14ab45699b34c7a1c7c8 (this is on the
master branch), "make check-system" fails with the following error:
--8<---------------cut here---------------start------------->8---
[ 1.277476] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.281489] sr 1:0:0:0: Attached scsi generic sg0 type 5
[ 1.288371] Freeing unused kernel memory: 1760K
[ 1.290336] Write protecting the kernel read-only data: 18432k
[ 1.295894] Freeing unused kernel memory: 2024K
[ 1.299853] Freeing unused kernel memory: 252K
GC Warning: pthread_getattr_np or pthread_attr_getstack failed for main thread
GC Warning: Couldn't read /proc/stat
Welcome, this is GNU's early boot Guile.
Use '--repl' for an initrd REPL.
loading kernel modules...
[ 1.555136] usbcore: registered new interface driver usb-storage
[ 1.574365] usbcore: registered new interface driver uas
[ 1.597116] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.603084] usbcore: registered new interface driver usbhid
[ 1.606669] usbhid: USB HID core driver
[ 1.670298] isci: Intel(R) C600 SAS Controller Driver - version 1.2.0
[ 1.711695] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[ 1.743896] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
[ 1.773861] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
[ 1.803838] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
[ 1.881230] FS-Cache: Loaded
[ 1.887453] 9pnet: Installing 9P2000 support
[ 1.890856] 9p: Installing v9fs 9p2000 file system support
[ 1.892612] FS-Cache: Netfs '9p' registered for caching
configuring QEMU networking...
[ 1.924277] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 1.984131] tsc: Refined TSC clocksource calibration: 2400.104 MHz
[ 1.989541] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x229899a5764, max_idle_ns: 440795258297 ns
loading '/gnu/store/d61zy77kkb043byv9cirk8f7nv0srm3i-linux-vm-loader'...
environment variable `PATH' set to `/gnu/store/9g41j8gn1fbzwx29cdnz0ca2lvwxixbr-qemu-minimal-2.11.1/bin:/gnu/store/7l6z1h7l7yip1kvbk1iiyi0693ghpsck-parted-3.2/sbin:/gnu/store/60xif54fvl04i7frgvl187mbq6cqa0dl-e2'
error: failed to evaluate directive: (directory "/gnu/store" 0 30000)
error: failed to evaluate directive: (directory "/gnu/store" 0 30000 1021)
In ./gnu/build/linux-boot.scm:
524:13 6 (_)
In unknown file:
5 (primitive-load "/gnu/store/d61zy77kkb043byv9cirk8f7nv0���")
4 (primitive-load "/gnu/store/a81ihaar57clfi6yk24zw439g4a���")
In ice-9/eval.scm:
619:8 3 (_ #(#<directory (guile-user) 2601140> ("/gnu/sto���" ��) ���))
In ./gnu/build/vm.scm:
405:4 2 (make-iso9660-image _ "/gnu/store/6vgi86k60kb35lwzn7gc���" ���)
In ./gnu/build/install.scm:
129:2 1 (populate-root-file-system "/gnu/store/6zfhby65bmxggbl…" ���)
In ice-9/boot-9.scm:
260:13 0 (for-each #<procedure 251cde0 at ./gnu/build/install.s��> ���)
In procedure chown: Operation not permitted
[ 2.236175] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000000
[ 2.236175]
[ 2.240162] CPU: 0 PID: 1 Comm: init Not tainted 4.15.15-gnu #1
[ 2.240162] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.0-0-g63451fca13-prebuilt.qemu-project.org 04/01/2014
[ 2.240162] Call Trace:
[ 2.240162] dump_stack+0x63/0x8b
[ 2.240162] panic+0xe4/0x244
[ 2.240162] do_exit+0xae2/0xaf0
[ 2.240162] ? wake_up_state+0x10/0x20
[ 2.240162] do_group_exit+0x43/0xb0
[ 2.240162] SyS_exit_group+0x14/0x20
[ 2.240162] do_syscall_64+0x73/0x130
[ 2.240162] entry_SYSCALL_64_after_hwframe+0x3d/0xa2
[ 2.240162] RIP: 0033:0x5d59c8
[ 2.240162] RSP: 002b:00007fffcbb38a98 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7
[ 2.240162] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00000000005d59c8
[ 2.240162] RDX: 0000000000000000 RSI: 000000000000003c RDI: 0000000000000000
[ 2.240162] RBP: 00000000007cdc10 R08: 00000000000000e7 R09: ffffffffffffffb0
[ 2.240162] R10: 00007fb6ea4cef88 R11: 0000000000000246 R12: 0000000000000001
[ 2.240162] R13: 0000000000a4b9a0 R14: 0000000000000002 R15: 000000000000000a
[ 2.240162] Kernel Offset: 0x15000000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff)
[ 2.240162] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000000
[ 2.240162]
--8<---------------cut here---------------end--------------->8---
The process hangs at this point. I ended it by pressing Control+C.
Make did not report which test(s) failed. I've attached the full log -
it's 1.2M compressed, and 28M uncompressed.
--
Chris
[check-system.df154c05dc65025eac2d14ab45699b34c7a1c7c8.log.xz (application/octet-stream, attachment)]
[signature.asc (application/pgp-signature, inline)]
bug-guix <at> gnu.org:bug#31119; Package guix.
(Tue, 29 Aug 2023 03:39:02 GMT) Full text and rfc822 format available.Message #8 received at 31119 <at> debbugs.gnu.org (full text, mbox):
From: Maxim Cournoyer <maxim.cournoyer <at> gmail.com> To: Chris Marusich <cmmarusich <at> gmail.com> Cc: 31119 <at> debbugs.gnu.org Subject: Re: bug#31119: make check-system fails: kernel panic Date: Mon, 28 Aug 2023 23:37:50 -0400
Hey Chris,
Chris Marusich <cmmarusich <at> gmail.com> writes:
> Hi,
>
> At commit df154c05dc65025eac2d14ab45699b34c7a1c7c8 (this is on the
> master branch), "make check-system" fails with the following error:
>
> [ 1.277476] cdrom: Uniform CD-ROM driver Revision: 3.20
> [ 1.281489] sr 1:0:0:0: Attached scsi generic sg0 type 5
> [ 1.288371] Freeing unused kernel memory: 1760K
> [ 1.290336] Write protecting the kernel read-only data: 18432k
> [ 1.295894] Freeing unused kernel memory: 2024K
> [ 1.299853] Freeing unused kernel memory: 252K
> GC Warning: pthread_getattr_np or pthread_attr_getstack failed for main thread
> GC Warning: Couldn't read /proc/stat
> Welcome, this is GNU's early boot Guile.
> Use '--repl' for an initrd REPL.
>
> loading kernel modules...
> [ 1.555136] usbcore: registered new interface driver usb-storage
> [ 1.574365] usbcore: registered new interface driver uas
> [ 1.597116] hidraw: raw HID events driver (C) Jiri Kosina
> [ 1.603084] usbcore: registered new interface driver usbhid
> [ 1.606669] usbhid: USB HID core driver
> [ 1.670298] isci: Intel(R) C600 SAS Controller Driver - version 1.2.0
> [ 1.711695] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
> [ 1.743896] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
> [ 1.773861] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
> [ 1.803838] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
> [ 1.881230] FS-Cache: Loaded
> [ 1.887453] 9pnet: Installing 9P2000 support
> [ 1.890856] 9p: Installing v9fs 9p2000 file system support
> [ 1.892612] FS-Cache: Netfs '9p' registered for caching
> configuring QEMU networking...
> [ 1.924277] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
> [ 1.984131] tsc: Refined TSC clocksource calibration: 2400.104 MHz
> [ 1.989541] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x229899a5764, max_idle_ns: 440795258297 ns
> loading '/gnu/store/d61zy77kkb043byv9cirk8f7nv0srm3i-linux-vm-loader'...
> environment variable `PATH' set to `/gnu/store/9g41j8gn1fbzwx29cdnz0ca2lvwxixbr-qemu-minimal-2.11.1/bin:/gnu/store/7l6z1h7l7yip1kvbk1iiyi0693ghpsck-parted-3.2/sbin:/gnu/store/60xif54fvl04i7frgvl187mbq6cqa0dl-e2'
> error: failed to evaluate directive: (directory "/gnu/store" 0 30000)
> error: failed to evaluate directive: (directory "/gnu/store" 0 30000 1021)
> In ./gnu/build/linux-boot.scm:
> 524:13 6 (_)
> In unknown file:
> 5 (primitive-load "/gnu/store/d61zy77kkb043byv9cirk8f7nv0���")
> 4 (primitive-load "/gnu/store/a81ihaar57clfi6yk24zw439g4a���")
> In ice-9/eval.scm:
> 619:8 3 (_ #(#<directory (guile-user) 2601140> ("/gnu/sto���" ��) ���))
> In ./gnu/build/vm.scm:
> 405:4 2 (make-iso9660-image _ "/gnu/store/6vgi86k60kb35lwzn7gc���" ���)
> In ./gnu/build/install.scm:
> 129:2 1 (populate-root-file-system "/gnu/store/6zfhby65bmxggbl…" ���)
> In ice-9/boot-9.scm:
> 260:13 0 (for-each #<procedure 251cde0 at ./gnu/build/install.s��> ���)
> In procedure chown: Operation not permitted
> [ 2.236175] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000000
> [ 2.236175]
> [ 2.240162] CPU: 0 PID: 1 Comm: init Not tainted 4.15.15-gnu #1
> [ 2.240162] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.0-0-g63451fca13-prebuilt.qemu-project.org 04/01/2014
> [ 2.240162] Call Trace:
> [ 2.240162] dump_stack+0x63/0x8b
> [ 2.240162] panic+0xe4/0x244
> [ 2.240162] do_exit+0xae2/0xaf0
> [ 2.240162] ? wake_up_state+0x10/0x20
> [ 2.240162] do_group_exit+0x43/0xb0
> [ 2.240162] SyS_exit_group+0x14/0x20
> [ 2.240162] do_syscall_64+0x73/0x130
> [ 2.240162] entry_SYSCALL_64_after_hwframe+0x3d/0xa2
> [ 2.240162] RIP: 0033:0x5d59c8
> [ 2.240162] RSP: 002b:00007fffcbb38a98 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7
> [ 2.240162] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00000000005d59c8
> [ 2.240162] RDX: 0000000000000000 RSI: 000000000000003c RDI: 0000000000000000
> [ 2.240162] RBP: 00000000007cdc10 R08: 00000000000000e7 R09: ffffffffffffffb0
> [ 2.240162] R10: 00007fb6ea4cef88 R11: 0000000000000246 R12: 0000000000000001
> [ 2.240162] R13: 0000000000a4b9a0 R14: 0000000000000002 R15: 000000000000000a
> [ 2.240162] Kernel Offset: 0x15000000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff)
> [ 2.240162] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000000
> [ 2.240162]
>
> The process hangs at this point. I ended it by pressing Control+C.
> Make did not report which test(s) failed. I've attached the full log -
> it's 1.2M compressed, and 28M uncompressed.
Weird. It seems the gid and uid were 0 (root), but that chown failed,
for unknown reasons. Was this on powerpc64le? Are you still (5 years
later) able to reproduce it? Otherwise feel free to close it.
--
Thanks,
Maxim
GNU bug tracking system
Copyright (C) 1999 Darren O. Benham,
1997,2003 nCipher Corporation Ltd,
1994-97 Ian Jackson.