Subject: bug#27227: closed (Re: bug#27227: [PATCH] gnu: perl: Update to 5.26.0.)

From: [email-masked] (GNU bug Tracking System)
Date: Sun, 04 Jun 2017 19:20:02 +0000

Your bug report

#27227: [PATCH] gnu: perl: Update to 5.26.0.

which was filed against the guix-patches package, has been closed.

The explanation is attached below, along with your original report.
If you require more details, please reply to [email-masked].

-- 
27227: http://debbugs.gnu.org/cgi/bugreport.cgi?bug=27227
GNU Bug Tracking System
Contact [email-masked] with problems

Subject: Re: bug#27227: [PATCH] gnu: perl: Update to 5.26.0.
From: Leo Famulari <[email-masked]>
To: Marius Bakke <[email-masked]>
Cc: [email-masked]
Date: Sun, 4 Jun 2017 15:19:39 -0400
List-Id: <debbugs-submit.debbugs.gnu.org>

On Sun, Jun 04, 2017 at 08:35:56PM +0200, Marius Bakke wrote:
> Leo Famulari <[email-masked]> writes:
> 
> > On Sun, Jun 04, 2017 at 03:45:50PM +0200, Marius Bakke wrote:
> >> Leo Famulari <[email-masked]> writes:
> >> 
> >> > * gnu/packages/perl.scm (perl): Update to 5.26.0.
> >> > * gnu/packages/patches/perl-no-sys-dirs.patch: Update patch context for
> >> > 'hints/linux.sh'.
> >> 
> >> LGTM.
> >
> > Thanks!
> >
> > Is core-updates still open for changes like this? Or should I wait until the
> > next cycle?
> 
> Perl (and openldap) have not been built yet, so I think it's fine.

I merged master into core-updates and pushed this as
f65805485dac3f8c4586648e3f7e901202095a19.

Subject: [PATCH] gnu: perl: Update to 5.26.0.
From: Leo Famulari <[email-masked]>
To: [email-masked]
Date: Sun, 4 Jun 2017 04:40:24 -0400
List-Id: <debbugs-submit.debbugs.gnu.org>

* gnu/packages/perl.scm (perl): Update to 5.26.0.
* gnu/packages/patches/perl-no-sys-dirs.patch: Update patch context for
'hints/linux.sh'.
---
 gnu/packages/patches/perl-no-sys-dirs.patch | 72 +++++++++++++++--------------
 gnu/packages/perl.scm                       |  4 +-
 2 files changed, 40 insertions(+), 36 deletions(-)

diff --git a/gnu/packages/patches/perl-no-sys-dirs.patch b/gnu/packages/patches/perl-no-sys-dirs.patch
index da91fef3b..ec5987561 100644
--- a/gnu/packages/patches/perl-no-sys-dirs.patch
+++ b/gnu/packages/patches/perl-no-sys-dirs.patch
@@ -1,6 +1,6 @@
 Don't look for headers and libraries in "traditional" locations.
 
-Patch from Nixpkgs by Eelco Dolstra <[email-masked]>.
+Patch adapted from Nixpkgs by Eelco Dolstra <[email-masked]>.
 
 diff -ru -x '*~' -x '*.rej' perl-5.20.0-orig/Configure perl-5.20.0/Configure
 --- perl-5.20.0-orig/Configure	2014-05-26 15:34:18.000000000 +0200
@@ -185,39 +185,6 @@ diff -ru -x '*~' -x '*.rej' perl-5.20.0-orig/hints/linux.sh perl-5.20.0/hints/li
  case "$plibpth" in
  '') plibpth=`LANG=C LC_ALL=C $gcc $ccflags $ldflags -print-search-dirs | grep libraries |
  	cut -f2- -d= | tr ':' $trnl | grep -v 'gcc' | sed -e 's:/$::'`
-@@ -178,32 +159,6 @@
-     ;;
- esac
- 
--case "$libc" in
--'')
--# If you have glibc, then report the version for ./myconfig bug reporting.
--# (Configure doesn't need to know the specific version since it just uses
--# gcc to load the library for all tests.)
--# We don't use __GLIBC__ and  __GLIBC_MINOR__ because they
--# are insufficiently precise to distinguish things like
--# libc-2.0.6 and libc-2.0.7.
--    for p in $plibpth
--    do
--        for trylib in libc.so.6 libc.so
--        do
--            if $test -e $p/$trylib; then
--                libc=`ls -l $p/$trylib | awk '{print $NF}'`
--                if $test "X$libc" != X; then
--                    break
--                fi
--            fi
--        done
--        if $test "X$libc" != X; then
--            break
--        fi
--    done
--    ;;
--esac
--
- # Are we using ELF?  Thanks to Kenneth Albanowski <[email-masked]>
- # for this test.
- cat >try.c <<'EOM'
 @@ -367,33 +322,6 @@
  	;;
  esac
@@ -252,3 +219,40 @@ diff -ru -x '*~' -x '*.rej' perl-5.20.0-orig/hints/linux.sh perl-5.20.0/hints/li
  # Linux on Synology.
  if [ -f /etc/synoinfo.conf -a -d /usr/syno ]; then
      # Tested on Synology DS213 and DS413
+diff --git a/hints/linux.sh b/hints/linux.sh
+index 3f38ea0..97aed11 100644
+--- a/hints/linux.sh
++++ b/hints/linux.sh
+@@ -195,32 +195,6 @@ case "$usequadmath" in
+   ;;
+ esac
+ 
+-case "$libc" in
+-'')
+-# If you have glibc, then report the version for ./myconfig bug reporting.
+-# (Configure doesn't need to know the specific version since it just uses
+-# gcc to load the library for all tests.)
+-# We don't use __GLIBC__ and  __GLIBC_MINOR__ because they
+-# are insufficiently precise to distinguish things like
+-# libc-2.0.6 and libc-2.0.7.
+-    for p in $plibpth
+-    do
+-        for trylib in libc.so.6 libc.so
+-        do
+-            if $test -e $p/$trylib; then
+-                libc=`ls -l $p/$trylib | awk '{print $NF}'`
+-                if $test "X$libc" != X; then
+-                    break
+-                fi
+-            fi
+-        done
+-        if $test "X$libc" != X; then
+-            break
+-        fi
+-    done
+-    ;;
+-esac
+-
+ if ${sh:-/bin/sh} -c exit; then
+   echo ''
+   echo 'You appear to have a working bash.  Good.'
diff --git a/gnu/packages/perl.scm b/gnu/packages/perl.scm
index 812d7548c..c3b486988 100644
--- a/gnu/packages/perl.scm
+++ b/gnu/packages/perl.scm
@@ -51,14 +51,14 @@
   ;; Yeah, Perl...  It is required early in the bootstrap process by Linux.
   (package
     (name "perl")
-    (version "5.24.0")
+    (version "5.26.0")
     (source (origin
              (method url-fetch)
              (uri (string-append "mirror://cpan/src/5.0/perl-"
                                  version ".tar.gz"))
              (sha256
               (base32
-               "00jj8zr8fnihrxxhl8h936ssczv5x86qb618yz1ig40d1rp0qhvy"))
+               "0zxn9hd7mqgq06ikyi6k70ngbvjf01z1paw0jd25byyl0rlwdrzb"))
              (patches (search-patches
                        "perl-no-sys-dirs.patch"
                        "perl-autosplit-default-time.patch"
-- 
2.13.0