GNU bug report logs - #27064
after GuixSD installation

Previous Next

Package: guix;

Reported by: Quiliro <quiliro <at> riseup.net>

Date: Thu, 25 May 2017 05:29:02 UTC

Severity: normal

Done: Ricardo Wurmus <rekado <at> elephly.net>

Bug is archived. No further changes may be made.

Full log

View this message in rfc822 format

From: help-debbugs <at> gnu.org (GNU bug Tracking System)
To: Ricardo Wurmus <rekado <at> elephly.net>
Cc: tracker <at> debbugs.gnu.org
Subject: bug#27064: closed (after GuixSD installation)
Date: Fri, 26 May 2017 08:06:02 +0000

[Message part 1 (text/plain, inline)]
Your message dated Fri, 26 May 2017 10:05:03 +0200
with message-id <87wp94f3gw.fsf <at> elephly.net>
and subject line Re: bug#27064: SOLVED
has caused the debbugs.gnu.org bug report #27064,
regarding after GuixSD installation
to be marked as done.

(If you believe you have received this mail in error, please contact
help-debbugs <at> gnu.org.)


-- 
27064: http://debbugs.gnu.org/cgi/bugreport.cgi?bug=27064
GNU Bug Tracking System
Contact help-debbugs <at> gnu.org with problems

[Message part 2 (message/rfc822, inline)]
From: Quiliro <quiliro <at> riseup.net>
To: bug-guix <at> gnu.org
Subject: after GuixSD installation
Date: Thu, 25 May 2017 00:29:10 -0500

After installation (with no error mesage), I reboot. These is the output of:
guix system init /mnt/etc/bare-bone.scm /mnt --fallback
http://sprunge.us/SXgC
GrUB starts to boot the system. Then the message
waiting for "my-root" partition
appears. Finally a Guile prompt appears after the following messages:
Error: in proceedure scm-error
failed to resolve partition "my-root"
I have tryed this 8 times changing different things such as label for uefi in bare-bones.scm:
http://sprunge.us/AhcN
http://sprunge.us/ZFAG



[Message part 3 (message/rfc822, inline)]
From: Ricardo Wurmus <rekado <at> elephly.net>
To: Quiliro <quiliro <at> riseup.net>
Cc: 27064-done <at> debbugs.gnu.org
Subject: Re: bug#27064: SOLVED
Date: Fri, 26 May 2017 10:05:03 +0200

Quiliro <quiliro <at> riseup.net> writes:

> The case is solved. The problem was a bad USB installer. It took 20 minutes to install in a Celeron D with bare-bones.scm Thank all of you that were persistent enough to sugest hundreds of ideas in about 20 installations (some took several hours) and about 13 reboots.

Phew!  Thank you for persisting!

-- 
Ricardo

GPG: BCA6 89B6 3655 3801 C3C6  2150 197A 5888 235F ACAC
https://elephly.net
This bug report was last modified 7 years and 359 days ago.

Previous Next

GNU bug tracking system
Copyright (C) 1999 Darren O. Benham, 1997,2003 nCipher Corporation Ltd, 1994-97 Ian Jackson.