Subject: bug#27064: closed (Re: bug#27064: SOLVED)

From: [email-masked] (GNU bug Tracking System)
Date: Fri, 26 May 2017 08:06:02 +0000

Your bug report

#27064: after GuixSD installation

which was filed against the guix package, has been closed.

The explanation is attached below, along with your original report.
If you require more details, please reply to [email-masked].

-- 
27064: http://debbugs.gnu.org/cgi/bugreport.cgi?bug=27064
GNU Bug Tracking System
Contact [email-masked] with problems

Subject: Re: bug#27064: SOLVED
From: Ricardo Wurmus <[email-masked]>
To: Quiliro <[email-masked]>
Cc: [email-masked]
Date: Fri, 26 May 2017 10:05:03 +0200
List-Id: <debbugs-submit.debbugs.gnu.org>

Quiliro <[email-masked]> writes:

> The case is solved. The problem was a bad USB installer. It took 20 minutes to install in a Celeron D with bare-bones.scm Thank all of you that were persistent enough to sugest hundreds of ideas in about 20 installations (some took several hours) and about 13 reboots.

Phew!  Thank you for persisting!

-- 
Ricardo

GPG: BCA6 89B6 3655 3801 C3C6  2150 197A 5888 235F ACAC
https://elephly.net

Subject: after GuixSD installation
From: Quiliro <[email-masked]>
To: [email-masked]
Date: Thu, 25 May 2017 00:29:10 -0500
List-Id: <debbugs-submit.debbugs.gnu.org>

After installation (with no error mesage), I reboot. These is the output of:
guix system init /mnt/etc/bare-bone.scm /mnt --fallback
http://sprunge.us/SXgC
GrUB starts to boot the system. Then the message
waiting for "my-root" partition
appears. Finally a Guile prompt appears after the following messages:
Error: in proceedure scm-error
failed to resolve partition "my-root"
I have tryed this 8 times changing different things such as label for uefi in bare-bones.scm:
http://sprunge.us/AhcN
http://sprunge.us/ZFAG