Subject: bug#16448: closed (Re: bug#16448: 24.3; Messages from (error "...") with UTF-8 chars are printed wrongly in Emacs Lisp scripts)

From: [email-masked] (GNU bug Tracking System)
Date: Sat, 01 Feb 2014 12:01:02 +0000

Your bug report

#16448: 24.3; Messages from (error "...") with UTF-8 chars are printed wrongly in Emacs Lisp scripts

which was filed against the emacs package, has been closed.

The explanation is attached below, along with your original report.
If you require more details, please reply to [email-masked].

-- 
16448: http://debbugs.gnu.org/cgi/bugreport.cgi?bug=16448
GNU Bug Tracking System
Contact [email-masked] with problems

Subject: Re: bug#16448: 24.3; Messages from (error "...") with UTF-8 chars are printed wrongly in Emacs Lisp scripts
From: Eli Zaretskii <[email-masked]>
To: [email-masked]
Cc: [email-masked], [email-masked]
Date: Sat, 01 Feb 2014 14:00:04 +0200
List-Id: <debbugs-submit.debbugs.gnu.org>

> Date: Wed, 15 Jan 2014 17:35:43 +0200
> From: Eli Zaretskii <[email-masked]>
> Cc: [email-masked], [email-masked]
> 
> > Date: Wed, 15 Jan 2014 08:02:49 +0400
> > From: Dmitry Antipov <[email-masked]>
> > Cc: [email-masked]
> > 
> > On 01/15/2014 04:10 AM, Sergey Tselikh wrote:
> > 
> > > In a script, when (error "...") instruction is executed with some UTF-8
> > > characters in its text, the message is not printed correctly.
> > 
> > In batch mode, (error ...) is handled by external-debugging-output, and the
> > latter just does:
> > 
> > putc (XINT (character) & 0xFF, stderr);
> >                         ^^^^^^
> > To allow multibyte sequences here, we should use something like:
> > 
> > === modified file 'src/print.c'
> > --- src/print.c	2014-01-01 07:43:34 +0000
> > +++ src/print.c	2014-01-15 03:55:39 +0000
> > @@ -709,8 +709,14 @@
> >   to make it write to the debugging output.  */)
> >     (Lisp_Object character)
> >   {
> > +  unsigned char str[MAX_MULTIBYTE_LENGTH];
> > +  unsigned int ch;
> > +  ptrdiff_t len;
> > +
> >     CHECK_NUMBER (character);
> > -  putc (XINT (character) & 0xFF, stderr);
> > +  ch = XINT (character);
> > +  len = CHAR_STRING (ch, str);
> > +  fwrite (str, len, 1, stderr);
> 
> This will only work correctly in a UTF-8 locale.  In the general case,
> we need to run the resulting multibyte sequence through ENCODE_SYSTEM,
> before writing it to stderr.

Done in trunk revision 116232.

Subject: 24.3; Messages from (error "...") with UTF-8 chars are printed wrongly in Emacs Lisp scripts
From: Sergey Tselikh <[email-masked]>
To: [email-masked]
Date: Wed, 15 Jan 2014 11:10:09 +1100
List-Id: <debbugs-submit.debbugs.gnu.org>

Hello.

In a script, when (error "...") instruction is executed with some UTF-8
characters in its text, the message is not printed correctly.

LANG environment variable is set to en_US.UTF-8 for all programs, my terminal is
x11-terms/rxvt-unicode with adequate UTF-8 support, Emacs version is GNU Emacs
24.3.1.

Examples (all of them are with LANG=en_US.UTF-8 in environment):

$ cat error.el 
(message "hello привет")
(message "привет hello")
(error "hello привет")

$ emacs --script error.el 
hello привет
привет hello
hello ?@825B

But: 
$ emacs -nw --eval '(error "hello привет")'  
^^^ successfully prints "hello привет" in minibuffer.

This ?@825B is not some trash.  Created a small table showing its origins (It
is ``echo hello привет | print-bits | cat -t'' vs. ``echo hello привет |
high-bits-01 | print-bits | cat -t''):

h    01101000  |   h  01101000  |
e    01100101  |   e  01100101  |
l    01101100  |   l  01101100  |
l    01101100  |   l  01101100  |
o    01101111  |   o  01101111  |
     00100000  |      00100000  |
M-P  11010000  |   P  01010000  |
M-?  10111111  |   ?  00111111  |   ?
M-Q  11010001  |   Q  01010001  |
M-^@ 10000000  |   @  01000000  |   @
M-P  11010000  |   P  01010000  |
M-8  10111000  |   8  00111000  |   8
M-P  11010000  |   P  01010000  |
M-2  10110010  |   2  00110010  |   2
M-P  11010000  |   P  01010000  |
M-5  10110101  |   5  00110101  |   5
M-Q  11010001  |   Q  01010001  |
M-^B 10000010  |   B  01000010  |   B

More examples:

$ cat any-other.el 
(error "cons:%s list:%s string:%s" (cons 'на 'речке) '(на речке на том бере) "be Быть beat Бить become Становиться begin Начинать bleed Кровоточить stung Жалить sweep Выметать swell Разбухать swim Плавать swing Качать take Брать, взять")

$ emacs --script any-other.el 
cons:(=0 . @5G:5) list:(=0 @5G:5 =0 B>< 15@5) string:be KBL beat 8BL become !B0=>28BLAO begin 0G8=0BL bleed @>2>B>G8BL stung 0;8BL sweep K<5B0BL swell  071CE0BL swim ;020BL swing 0G0BL take @0BL, 27OBL

$ cat ja.el 
(setq jstr "案ずるより産むが易し。 Anzuru yori umu ga yasushi. 出る杭は打たれる。 Deru kui wa utareru.")
(message "%s" jstr)
(error "%s" jstr)

$ emacs --script ja.el 
案ずるより産むが易し。 Anzuru yori umu ga yasushi. 出る杭は打たれる。 Deru kui wa utareru.
HZ???#?LW Anzuru yori umu ga yasushi. ?moS_?? Deru kui wa utareru.

In GNU Emacs 24.3.1 (x86_64-pc-linux-gnu, GTK+ Version 2.24.17)
 of 2013-10-10 on laptop
Windowing system distributor `The X.Org Foundation', version 11.0.11403000
Configured using:
 `configure '--prefix=/usr' '--build=x86_64-pc-linux-gnu'
 '--host=x86_64-pc-linux-gnu' '--mandir=/usr/share/man'
 '--infodir=/usr/share/info' '--datadir=/usr/share' '--sysconfdir=/etc'
 '--localstatedir=/var/lib' '--libdir=/usr/lib64'
 '--disable-silent-rules' '--disable-dependency-tracking'
 '--program-suffix=-emacs-24' '--infodir=/usr/share/info/emacs-24'
 '--enable-locallisppath=/etc/emacs:/usr/share/emacs/site-lisp'
 '--with-crt-dir=/usr/lib/gcc/x86_64-pc-linux-gnu/4.7.3/../../../../lib64'
 '--with-gameuser=games' '--without-compress-info' '--without-hesiod'
 '--without-kerberos' '--without-kerberos5' '--with-gpm' '--with-dbus'
 '--with-gnutls' '--with-xml2' '--without-selinux' '--without-wide-int'
 '--with-sound' '--with-x' '--without-ns' '--with-gconf'
 '--without-gsettings' '--with-toolkit-scroll-bars' '--with-gif'
 '--with-jpeg' '--with-png' '--with-rsvg' '--with-tiff' '--with-xpm'
 '--with-imagemagick' '--with-xft' '--with-libotf' '--with-m17n-flt'
 '--with-x-toolkit=gtk2' 'GENTOO_PACKAGE=app-editors/emacs-24.3-r2'
 'build_alias=x86_64-pc-linux-gnu' 'host_alias=x86_64-pc-linux-gnu'
 'CFLAGS=-pipe -march=corei7-avx -mno-aes -O2' 'LDFLAGS=-Wl,-O1
 -Wl,--as-needed' 'CPPFLAGS=''

Important settings:
  value of $LC_COLLATE: C
  value of $LANG: en_US.UTF-8
  locale-coding-system: utf-8-unix
  default enable-multibyte-characters: t

-- 
Sergey Tselikh <[email-masked]>