Package: automake;
Reported by: Jim Meyering <jim <at> meyering.net>
Date: Mon, 26 Dec 2011 22:11:01 UTC
Severity: normal
Done: Stefano Lattarini <stefano.lattarini <at> gmail.com>
Bug is archived. No further changes may be made.
View this message in rfc822 format
From: help-debbugs <at> gnu.org (GNU bug Tracking System) To: Jim Meyering <jim <at> meyering.net> Subject: bug#10374: closed (Re: bug#10374: 3 test failures on fedora 16) Date: Fri, 13 Jan 2012 12:46:01 +0000
[Message part 1 (text/plain, inline)]
Your bug report #10374: 3 test failures on fedora 16 which was filed against the automake package, has been closed. The explanation is attached below, along with your original report. If you require more details, please reply to 10374 <at> debbugs.gnu.org. -- 10374: http://debbugs.gnu.org/cgi/bugreport.cgi?bug=10374 GNU Bug Tracking System Contact help-debbugs <at> gnu.org with problems
[Message part 2 (message/rfc822, inline)]
From: Stefano Lattarini <stefano.lattarini <at> gmail.com> To: Jim Meyering <jim <at> meyering.net> Cc: 10374-done <at> debbugs.gnu.org Subject: Re: bug#10374: 3 test failures on fedora 16 Date: Fri, 13 Jan 2012 13:44:40 +0100On 12/28/2011 12:01 PM, Jim Meyering wrote: > > With that, make check on master (Fedora 16, x86_64) does this: > > # TOTAL: 2477 > # PASS: 2378 > # SKIP: 60 > # XFAIL: 29 > # FAIL: 9 > # XPASS: 0 > # ERROR: 1 > These failures are now being analyzed in automake bug#10418: <http://debbugs.gnu.org/cgi/bugreport.cgi?bug=10418> (and few of them have already been fixed in fact). To avoid having too much noise and extra confusion in the bug tracker, I'm closing this bug report. Refer to bug#10418 for further discussion. Thanks, Stefano
[Message part 3 (message/rfc822, inline)]
From: Jim Meyering <jim <at> meyering.net> To: bug-automake <at> gnu.org Subject: 3 test failures on fedora 16 Date: Mon, 26 Dec 2011 23:07:55 +0100Hello, I was surprised to see test failures on Fedora 16. At least the color2 failure seems to be due to a difference in how expect works. + expect -f expect-make + cat stdout + spawn make -e check Here, its "expect -f expect-make" invocation produces only one line of output, while on Debian unstable it produces the expected colorized make output. The versions of expect are the same. Here's the full log. ============================================== GNU Automake 1.11a: tests/test-suite.log ============================================== 3 of 1112 tests failed. (38 tests were not run). .. contents:: :depth: 2 SKIP: get-sysconf.test (exit: 77) ================================= /h/j/w/co/automake/tests:/opt/cov-sa-linux64-5.4.0/bin:/usr/lib64/ccache:/h/j/bin/perl:/h/j/bin:/p/p/git/bin:/p/bin:/sbin:/usr/sbin:/bin:/usr/bin:/usr/local:/usr/local/bin ++ set -e ++ pwd /h/j/w/co/automake/tests/get-sysconf.dir + set -e + top_testsrcdir=/h/j/w/co/automake/tests/.. ++ cd .. ++ pwd + testbuilddir=/h/j/w/co/automake/tests ++ cd /h/j/w/co/automake/tests/.. ++ pwd + top_testbuilddir=/h/j/w/co/automake + st=0 + sed 20q /h/j/w/co/automake/tests/../ChangeLog 2011-12-24 Stefano Lattarini <stefano.lattarini <at> gmail.com> gitignore: use only one .gitignore file, in the top-level directory * doc/.gitignore, doc/amhello/.gitignore, lib/Automake/.gitignore, lib/Automake/tests/.gitignore, tests/.gitignore: Deleted, their contents merged into ... * .gitignore: ... this top-level file. Since we are at it, improve it by anchoring files where it makes sense. 2011-12-24 Stefano Lattarini <stefano.lattarini <at> gmail.com> tests: one more fixlet for gettext macros requirement * tests/gettext-macros.test (configure.in): Add calls to AC_INIT and AC_PROG_CC, to avoid a spurious failure in the later aclocal invocation. Luckily, this wart wasn't causing any spurious SKIP or FAIL, but only the redundant addition to the `-Wno-syntax' option to some aclocal invocations in the gettext tests. 2011-12-24 Stefano Lattarini <stefano.lattarini <at> gmail.com> + /usr/bin/perl -V Summary of my perl5 (revision 5 version 14 subversion 2) configuration: Platform: osname=linux, osvers=2.6.32-220.el6.x86_64, archname=x86_64-linux-thread-multi uname='linux x86-15.phx2.fedoraproject.org 2.6.32-220.el6.x86_64 #1 smp wed nov 9 08:03:13 est 2011 x86_64 x86_64 x86_64 gnulinux ' config_args='-des -Doptimize=-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m64 -mtune=generic -Dccdlflags=-Wl,--enable-new-dtags -DDEBUGGING=-g -Dversion=5.14.2 -Dmyhostname=localhost -Dperladmin=root <at> localhost -Dcc=gcc -Dcf_by=Red Hat, Inc. -Dprefix=/usr -Dvendorprefix=/usr -Dsiteprefix=/usr/local -Dsitelib=/usr/local/share/perl5 -Dsitearch=/usr/local/lib64/perl5 -Dprivlib=/usr/share/perl5 -Dvendorlib=/usr/share/perl5/vendor_perl -Darchlib=/usr/lib64/perl5 -Dvendorarch=/usr/lib64/perl5/vendor_perl -Darchname=x86_64-linux-thread-multi -Dlibpth=/usr/local/lib64 /lib64 /usr/lib64 -Duseshrplib -Dusethreads -Duseithreads -Dusedtrace=/usr/bin/dtrace -Duselargefiles -Dd_semctl_semun -Di_db -Ui_ndbm -Di_gdbm -Di_shadow -Di_syslog -Dman3ext=3pm -Duseperlio -Dinstallusrbinperl=n -Ubincompat5005 -Uversiononly -Dpager=/usr/bin/less -isr -Dd_gethostent_r_proto -Ud_endhostent_r_proto -Ud_sethostent_r_proto -Ud_endprotoent_r_proto -Ud_setprotoent_r_proto -Ud_endservent_r_proto -Ud_setservent_r_proto -Dscriptdir=/usr/bin' hint=recommended, useposix=true, d_sigaction=define useithreads=define, usemultiplicity=define useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef use64bitint=define, use64bitall=define, uselongdouble=undef usemymalloc=n, bincompat5005=undef Compiler: cc='gcc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64', optimize='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m64 -mtune=generic', cppflags='-D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include' ccversion='', gccversion='4.6.2 20111027 (Red Hat 4.6.2-1)', gccosandvers='' intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16 ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8 alignbytes=8, prototype=define Linker and Libraries: ld='gcc', ldflags =' -fstack-protector' libpth=/usr/local/lib64 /lib64 /usr/lib64 libs=-lresolv -lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc -lgdbm_compat perllibs=-lresolv -lnsl -ldl -lm -lcrypt -lutil -lpthread -lc libc=, so=so, useshrplib=true, libperl=libperl.so gnulibc_version='2.14.90' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,--enable-new-dtags -Wl,-rpath,/usr/lib64/perl5/CORE' cccdlflags='-fPIC', lddlflags='-shared -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m64 -mtune=generic' Characteristics of this binary (from libperl): Compile-time options: MULTIPLICITY PERL_DONT_CREATE_GVSV PERL_IMPLICIT_CONTEXT PERL_MALLOC_WRAP PERL_PRESERVE_IVUV USE_64_BIT_ALL USE_64_BIT_INT USE_ITHREADS USE_LARGE_FILES USE_PERLIO USE_PERL_ATOF USE_REENTRANT_API Built under linux Compiled at Dec 21 2011 13:00:29 @INC: /usr/local/lib64/perl5 /usr/local/share/perl5 /usr/lib64/perl5/vendor_perl /usr/share/perl5/vendor_perl /usr/lib64/perl5 /usr/share/perl5 . + cat /h/j/w/co/automake/config.log This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. It was created by GNU Automake configure 1.11a, which was generated by GNU Autoconf 2.68.101-b8546. Invocation command line was $ ./configure --prefix=/p ## --------- ## ## Platform. ## ## --------- ## hostname = hx.meyering.net uname -m = x86_64 uname -r = 3.1.5-6.fc16.x86_64 uname -s = Linux uname -v = #1 SMP Thu Dec 15 16:14:44 UTC 2011 /usr/bin/uname -p = unknown /bin/uname -X = unknown /bin/arch = x86_64 /usr/bin/arch -k = unknown /usr/convex/getsysinfo = unknown /usr/bin/hostinfo = unknown /bin/machine = unknown /usr/bin/oslevel = unknown /bin/universe = unknown PATH: /opt/cov-sa-linux64-5.4.0/bin PATH: /usr/lib64/ccache PATH: /h/j/bin/perl PATH: /h/j/bin PATH: /p/p/git/bin PATH: /p/bin PATH: /sbin PATH: /usr/sbin PATH: /bin PATH: /usr/bin PATH: /usr/local PATH: /usr/local/bin ## ----------- ## ## Core tests. ## ## ----------- ## configure:1749: checking build system type configure:1763: result: x86_64-unknown-linux-gnu configure:1815: checking for a BSD-compatible install configure:1883: result: /p/bin/install -c configure:1894: checking whether build environment is sane configure:1949: result: yes configure:2100: checking for a thread-safe mkdir -p configure:2139: result: /p/bin/mkdir -p configure:2152: checking for gawk configure:2168: found /bin/gawk configure:2179: result: gawk configure:2190: checking whether make sets $(MAKE) configure:2212: result: yes configure:2326: checking for perl configure:2344: found /usr/bin/perl configure:2356: result: /usr/bin/perl configure:2368: /usr/bin/perl --version This is perl 5, version 14, subversion 2 (v5.14.2) built for x86_64-linux-thread-multi Copyright 1987-2011, Larry Wall Perl may be copied only under the terms of either the Artistic License or the GNU General Public License, which may be found in the Perl 5 source kit. Complete documentation for Perl, including FAQ lists, should be found on this system using "man perl" or "perldoc perl". If you have access to the Internet, point your browser at http://www.perl.org/, the Perl Home Page. configure:2371: $? = 0 configure:2381: checking whether /usr/bin/perl supports ithreads configure:2404: result: yes configure:2416: checking for tex configure:2432: found /usr/bin/tex configure:2443: result: tex configure:2454: tex --version </dev/null TeX 3.141592 (Web2C 7.5.6) kpathsea version 3.5.6 Copyright 2007 D.E. Knuth. Kpathsea is copyright 2007 Karl Berry and Olaf Weber. There is NO warranty. Redistribution of this software is covered by the terms of both the TeX copyright and the Lesser GNU General Public License. For more information about these matters, see the file named COPYING and the TeX source. Primary author of TeX: D.E. Knuth. Kpathsea written by Karl Berry, Olaf Weber, and others. configure:2457: $? = 0 configure:2472: checking whether autoconf is installed configure:2477: autoconf --version autoconf (GNU Autoconf) 2.68.101-b8546 Copyright (C) 2011 Free Software Foundation, Inc. License GPLv3+/Autoconf: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>, <http://gnu.org/licenses/exceptions.html> This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. Written by David J. MacKenzie and Akim Demaille. configure:2480: $? = 0 configure:2488: result: yes configure:2495: checking whether autoconf works configure:2502: cd conftest && autoconf -o /dev/null conftest.ac configure:2505: $? = 0 configure:2514: result: yes configure:2521: checking whether autoconf is recent enough configure:2528: cd conftest && autoconf -o /dev/null conftest.ac configure:2531: $? = 0 configure:2540: result: yes configure:2547: checking whether ln works configure:2567: result: yes configure:2582: checking for grep that handles long lines and -e configure:2640: result: /p/bin/grep configure:2645: checking for egrep configure:2707: result: /p/bin/grep -E configure:2712: checking for fgrep configure:2774: result: /p/bin/grep -F configure:2780: checking whether /bin/sh has working 'set -e' with exit trap configure:2793: result: yes configure:2960: checking that generated files are newer than configure configure:2966: result: done configure:2974: creating ./config.status ## ---------------------- ## ## Running config.status. ## ## ---------------------- ## This file was extended by GNU Automake config.status 1.11a, which was generated by GNU Autoconf 2.68.101-b8546. Invocation command line was CONFIG_FILES = CONFIG_HEADERS = CONFIG_LINKS = CONFIG_COMMANDS = $ ./config.status on hx.meyering.net config.status:796: creating Makefile config.status:796: creating doc/Makefile config.status:796: creating lib/Automake/Makefile config.status:796: creating lib/Automake/tests/Makefile config.status:796: creating lib/Makefile config.status:796: creating lib/am/Makefile config.status:796: creating m4/Makefile config.status:796: creating tests/Makefile config.status:796: creating tests/defs-static config.status:796: creating tests/aclocal-1.11a config.status:796: creating tests/automake-1.11a ## ---------------- ## ## Cache variables. ## ## ---------------- ## ac_cv_build=x86_64-unknown-linux-gnu ac_cv_env_build_alias_set= ac_cv_env_build_alias_value= ac_cv_env_host_alias_set= ac_cv_env_host_alias_value= ac_cv_env_target_alias_set= ac_cv_env_target_alias_value= ac_cv_path_EGREP='/p/bin/grep -E' ac_cv_path_FGREP='/p/bin/grep -F' ac_cv_path_GREP=/p/bin/grep ac_cv_path_PERL=/usr/bin/perl ac_cv_path_install='/p/bin/install -c' ac_cv_path_mkdir=/p/bin/mkdir ac_cv_prog_AWK=gawk ac_cv_prog_TEX=tex ac_cv_prog_make_make_set=yes am_cv_autoconf_installed=yes am_cv_autoconf_version=yes am_cv_autoconf_works=yes am_cv_prog_PERL_ithreads=yes am_cv_prog_ln=ln am_cv_sh_errexit_works=yes ## ----------------- ## ## Output variables. ## ## ----------------- ## ACLOCAL='perllibdir="/h/j/w/co/automake/lib:./lib" "/h/j/w/co/automake/aclocal" --acdir=m4 -I m4' AMTAR='${SHELL} /h/j/w/co/automake/lib/missing --run tar' AM_BACKSLASH='\' AM_DEFAULT_VERBOSITY='1' APIVERSION='1.11a' AUTOCONF='${SHELL} /h/j/w/co/automake/lib/missing --run autoconf' AUTOHEADER='${SHELL} /h/j/w/co/automake/lib/missing --run autoheader' AUTOMAKE='perllibdir="/h/j/w/co/automake/lib:./lib" "/h/j/w/co/automake/automake" --libdir=lib' AWK='gawk' CYGPATH_W='echo' DEFS='-DPACKAGE_NAME=\"GNU\ Automake\" -DPACKAGE_TARNAME=\"automake\" -DPACKAGE_VERSION=\"1.11a\" -DPACKAGE_STRING=\"GNU\ Automake\ 1.11a\" -DPACKAGE_BUGREPORT=\"bug-automake <at> gnu.org\" -DPACKAGE_URL=\"http://www.gnu.org/software/automake/\" -DPACKAGE=\"automake\" -DVERSION=\"1.11a\"' ECHO_C='' ECHO_N='-n' ECHO_T='' EGREP='/p/bin/grep -E' FGREP='/p/bin/grep -F' GREP='/p/bin/grep' HELP2MAN='${SHELL} /h/j/w/co/automake/lib/missing --run help2man' INSTALL_DATA='${INSTALL} -m 644' INSTALL_PROGRAM='${INSTALL}' INSTALL_SCRIPT='${INSTALL}' INSTALL_STRIP_PROGRAM='$(install_sh) -c -s' LIBOBJS='' LIBS='' LN='ln' LTLIBOBJS='' MAKEINFO='${SHELL} /h/j/w/co/automake/lib/missing --run makeinfo' MKDIR_P='/p/bin/mkdir -p' MODIFICATION_DELAY='2' PACKAGE='automake' PACKAGE_BUGREPORT='bug-automake <at> gnu.org' PACKAGE_NAME='GNU Automake' PACKAGE_STRING='GNU Automake 1.11a' PACKAGE_TARNAME='automake' PACKAGE_URL='http://www.gnu.org/software/automake/' PACKAGE_VERSION='1.11a' PATH_SEPARATOR=':' PERL='/usr/bin/perl' PERL_THREADS='1' SET_MAKE='' SHELL='/bin/sh' STRIP='' TEX='tex' VERSION='1.11a' am_AUTOCONF='autoconf' am_AUTOHEADER='autoheader' am_AUTOM4TE='autom4te' am_AUTORECONF='autoreconf' am_AUTOUPDATE='autoupdate' am__isrc='' am__leading_dot='.' am__tar='${AMTAR} chof - "$$tardir"' am__untar='${AMTAR} xf -' bindir='${exec_prefix}/bin' build='x86_64-unknown-linux-gnu' build_alias='' build_cpu='x86_64' build_os='linux-gnu' build_vendor='unknown' datadir='${datarootdir}' datarootdir='${prefix}/share' docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' dvidir='${docdir}' exec_prefix='${prefix}' host_alias='' htmldir='${docdir}' includedir='${prefix}/include' infodir='${datarootdir}/info' install_sh='${SHELL} /h/j/w/co/automake/lib/install-sh' libdir='${exec_prefix}/lib' libexecdir='${exec_prefix}/libexec' localedir='${datarootdir}/locale' localstatedir='${prefix}/var' mandir='${datarootdir}/man' mkdir_p='/p/bin/mkdir -p' oldincludedir='/usr/include' pdfdir='${docdir}' pkgvdatadir='${datadir}/automake-1.11a' prefix='/p' program_transform_name='s,x,x,' psdir='${docdir}' sbindir='${exec_prefix}/sbin' sh_errexit_works='yes' sharedstatedir='${prefix}/com' sysconfdir='${prefix}/etc' target_alias='' ## ----------- ## ## confdefs.h. ## ## ----------- ## /* confdefs.h */ #define PACKAGE_NAME "GNU Automake" #define PACKAGE_TARNAME "automake" #define PACKAGE_VERSION "1.11a" #define PACKAGE_STRING "GNU Automake 1.11a" #define PACKAGE_BUGREPORT "bug-automake <at> gnu.org" #define PACKAGE_URL "http://www.gnu.org/software/automake/" #define PACKAGE "automake" #define VERSION "1.11a" configure: exit 0 + cat /h/j/w/co/automake/tests/aclocal-1.11a #!/bin/sh # tests/aclocal-1.11a. Generated from aclocal.in by configure. # Be Bourne compatible if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then emulate sh NULLCMD=: # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which # is contrary to our usage. Disable this feature. alias -g '${1+"$@"}'='"$@"' fi perllibdir="/h/j/w/co/automake/lib:/h/j/w/co/automake/lib" export perllibdir exec "/h/j/w/co/automake/aclocal" "--automake-acdir=/h/j/w/co/automake/m4" \ "--system-acdir=/h/j/w/co/automake/m4/acdir" ${1+"$@"} + cat /h/j/w/co/automake/tests/automake-1.11a #!/bin/sh # tests/automake-1.11a. Generated from automake.in by configure. # Be Bourne compatible if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then emulate sh NULLCMD=: # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which # is contrary to our usage. Disable this feature. alias -g '${1+"$@"}'='"$@"' fi perllibdir="/h/j/w/co/automake/lib:/h/j/w/co/automake/lib" export perllibdir exec "/h/j/w/co/automake/automake" "--libdir=/h/j/w/co/automake/lib" ${1+"$@"} + test 0 -eq 0 + Exit 77 + set +e + exit 77 + exit 77 + exit_status=77 + set +e + cd /h/j/w/co/automake/tests + case $exit_status,$keep_testdirs in + test 0 '!=' 0 + echo 'get-sysconf: exit 77' get-sysconf: exit 77 + exit 77 SKIP: amhello-cross-compile.test (exit: 77) =========================================== /h/j/w/co/automake/tests:/opt/cov-sa-linux64-5.4.0/bin:/usr/lib64/ccache:/h/j/bin/perl:/h/j/bin:/p/p/git/bin:/p/bin:/sbin:/usr/sbin:/bin:/usr/bin:/usr/local:/usr/local/bin amhello-cross-compile: running i586-mingw32msvc-gcc --version ./defs: line 595: i586-mingw32msvc-gcc: command not found SKIP: ar-lib5a.test (exit: 77) ============================== /h/j/w/co/automake/tests:/opt/cov-sa-linux64-5.4.0/bin:/usr/lib64/ccache:/h/j/bin/perl:/h/j/bin:/p/p/git/bin:/p/bin:/sbin:/usr/sbin:/bin:/usr/bin:/usr/local:/usr/local/bin ar-lib5a: running lib -out:defstest.lib ./defs: line 469: lib: command not found ar-lib5a: skipped test: Microsoft `lib' utility not available FAIL: color2.test (exit: 1) =========================== /h/j/w/co/automake/tests:/opt/cov-sa-linux64-5.4.0/bin:/usr/lib64/ccache:/h/j/bin/perl:/h/j/bin:/p/p/git/bin:/p/bin:/sbin:/usr/sbin:/bin:/usr/bin:/usr/local:/usr/local/bin ++ set -e ++ pwd /h/j/w/co/automake/tests/color2.dir + TERM=ansi + export TERM + red='[0;31m' + grn='[0;32m' + lgn='[1;32m' + blu='[1;34m' + std='[m' + case `echo "$std" | grep .` in ++ echo '[m' ++ grep . + set +e + expect -c 'exit 77' + test 77 -eq 77 + cat + cat + MAKE=make + expect -f expect-check spawn make stdout is a tty + rm -f check Makefile + cat + cat + cat + cat + cat + cp fail xfail + cp pass xpass + chmod +x pass fail skip xpass xfail + aclocal-1.11a -Werror + automake-1.11a --foreign -Werror -Wall + autoconf -B /no/such/dir + ./configure checking for a BSD-compatible install... /p/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /p/bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile + cat + MAKE=make + expect -f expect-make + cat stdout spawn make -e check + test_color + cat stdout + /p/bin/grep -F '[0;32m' + grep ': pass' + exit_status=1 + set +e + cd /h/j/w/co/automake/tests + case $exit_status,$keep_testdirs in + test 0 '!=' 0 + echo 'color2: exit 1' color2: exit 1 + exit 1 SKIP: compile4.test (exit: 77) ============================== /h/j/w/co/automake/tests:/opt/cov-sa-linux64-5.4.0/bin:/usr/lib64/ccache:/h/j/bin/perl:/h/j/bin:/p/p/git/bin:/p/bin:/sbin:/usr/sbin:/bin:/usr/bin:/usr/local:/usr/local/bin compile4: running cl -? ./defs: line 369: cl: command not found SKIP: compile5.test (exit: 77) ============================== /h/j/w/co/automake/tests:/opt/cov-sa-linux64-5.4.0/bin:/usr/lib64/ccache:/h/j/bin/perl:/h/j/bin:/p/p/git/bin:/p/bin:/sbin:/usr/sbin:/bin:/usr/bin:/usr/local:/usr/local/bin ++ set -e ++ pwd /h/j/w/co/automake/tests/compile5.dir + cp /h/j/w/co/automake/lib/compile . + cat + chmod +x ./cl + cat + : + cat + aclocal-1.11a -Werror + autoconf -B /no/such/dir + automake-1.11a --foreign -Werror -Wall -a configure.in:4: installing `./config.guess' configure.in:4: installing `./config.sub' + ./configure checking for a BSD-compatible install... /p/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /p/bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking build system type... x86_64-unknown-linux-gnu checking host system type... x86_64-unknown-linux-gnu checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating check_host + ./check_host + exit_status=77 + set +e + cd /h/j/w/co/automake/tests + case $exit_status,$keep_testdirs in + test 0 '!=' 0 + echo 'compile5: exit 77' compile5: exit 77 + exit 77 SKIP: cscope.test (exit: 77) ============================ /h/j/w/co/automake/tests:/opt/cov-sa-linux64-5.4.0/bin:/usr/lib64/ccache:/h/j/bin/perl:/h/j/bin:/p/p/git/bin:/p/bin:/sbin:/usr/sbin:/bin:/usr/bin:/usr/local:/usr/local/bin ++ set -e ++ pwd /h/j/w/co/automake/tests/cscope.dir + cat + mkdir sub sub/subsub + cat + cat + echo 'int foo_func () { return 0; }' + echo 'int main () { return 0; }' + cat + : + echo 'int main () { return 0; }' + aclocal-1.11a -Werror + autoconf -B /no/such/dir + automake-1.11a --foreign -Werror -Wall --add-missing Makefile.am:4: installing `./elisp-comp' + mkdir build + cd build + ../configure checking for a BSD-compatible install... /p/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /p/bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking for style of include used by make... GNU checking dependency style of gcc... gcc3 checking for g++... g++ checking whether we are using the GNU C++ compiler... yes checking whether g++ accepts -g... yes checking dependency style of g++... gcc3 checking for gfortran... no checking for g95... no checking for xlf95... no checking for f95... no checking for fort... no checking for ifort... no checking for ifc... no checking for efc... no checking for pgfortran... no checking for pgf95... no checking for lf95... no checking for ftn... no checking for nagfor... no checking for xlf90... no checking for f90... no checking for pgf90... no checking for pghpf... no checking for epcf90... no checking for g77... no checking for xlf... no checking for f77... no checking for frt... no checking for pgf77... no checking for cf77... no checking for fort77... no checking for fl32... no checking for af77... no checking whether we are using the GNU Fortran compiler... no checking whether accepts -g... no checking for gcj... no checking dependency style of gcj... none checking for emacs... emacs checking where .elc files should go... ${datarootdir}/emacs/site-lisp checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating sub/Makefile config.status: executing depfiles commands + make -n cscope rm -f cscope.files list='sub'; for subdir in $list; do \ test "$subdir" = . || (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make cscopelist); \ done make[1]: Entering directory `/h/j/w/co/automake/tests/cscope.dir/build/sub' /p/bin/mkdir -p subsub echo 'int generated_subsub () { return 0; }' > subsub/gen.c list='subsub/dist.c subsub/gen.c '; \ case "../../sub" in \ [\\/]* | ?:[\\/]*) sdir="../../sub" ;; \ *) sdir=sub/../../sub ;; \ esac; \ for i in $list; do \ if test -f "$i"; then \ echo "sub/$i"; \ else \ echo "$sdir/$i"; \ fi; \ done >> ../cscope.files make[1]: Leaving directory `/h/j/w/co/automake/tests/cscope.dir/build/sub' list='foo.c bar.cpp baz.f90 foo.el'; \ case ".." in \ [\\/]* | ?:[\\/]*) sdir=".." ;; \ *) sdir=./.. ;; \ esac; \ for i in $list; do \ if test -f "$i"; then \ echo "./$i"; \ else \ echo "$sdir/$i"; \ fi; \ done >> ./cscope.files test ! -s cscope.files \ || cscope -b -q -i cscope.files + : cscope + make cscope rm -f cscope.files list='sub'; for subdir in $list; do \ test "$subdir" = . || (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make cscopelist); \ done make[1]: Entering directory `/h/j/w/co/automake/tests/cscope.dir/build/sub' /p/bin/mkdir -p subsub echo 'int generated_subsub () { return 0; }' > subsub/gen.c list='subsub/dist.c subsub/gen.c '; \ case "../../sub" in \ [\\/]* | ?:[\\/]*) sdir="../../sub" ;; \ *) sdir=sub/../../sub ;; \ esac; \ for i in $list; do \ if test -f "$i"; then \ echo "sub/$i"; \ else \ echo "$sdir/$i"; \ fi; \ done >> ../cscope.files make[1]: Leaving directory `/h/j/w/co/automake/tests/cscope.dir/build/sub' list='foo.c bar.cpp baz.f90 foo.el'; \ case ".." in \ [\\/]* | ?:[\\/]*) sdir=".." ;; \ *) sdir=./.. ;; \ esac; \ for i in $list; do \ if test -f "$i"; then \ echo "./$i"; \ else \ echo "$sdir/$i"; \ fi; \ done >> ./cscope.files test ! -s cscope.files \ || cscope -b -q -i cscope.files + cat stderr + grep 'cannot find file' stderr + test -f cscope.files + /p/bin/grep -F foo.c cscope.files ./../foo.c + /p/bin/grep -F bar.cpp cscope.files ./../bar.cpp + /p/bin/grep -F sub/subsub/dist.c cscope.files sub/../../sub/subsub/dist.c + /p/bin/grep -F sub/subsub/gen.c cscope.files sub/subsub/gen.c + cp cscope.files cscope.files1 + make cscope rm -f cscope.files list='sub'; for subdir in $list; do \ test "$subdir" = . || (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make cscopelist); \ done make[1]: Entering directory `/h/j/w/co/automake/tests/cscope.dir/build/sub' list='subsub/dist.c subsub/gen.c '; \ case "../../sub" in \ [\\/]* | ?:[\\/]*) sdir="../../sub" ;; \ *) sdir=sub/../../sub ;; \ esac; \ for i in $list; do \ if test -f "$i"; then \ echo "sub/$i"; \ else \ echo "$sdir/$i"; \ fi; \ done >> ../cscope.files make[1]: Leaving directory `/h/j/w/co/automake/tests/cscope.dir/build/sub' list='foo.c bar.cpp baz.f90 foo.el'; \ case ".." in \ [\\/]* | ?:[\\/]*) sdir=".." ;; \ *) sdir=./.. ;; \ esac; \ for i in $list; do \ if test -f "$i"; then \ echo "./$i"; \ else \ echo "$sdir/$i"; \ fi; \ done >> ./cscope.files test ! -s cscope.files \ || cscope -b -q -i cscope.files + diff cscope.files cscope.files1 + make distclean Making distclean in sub make[1]: Entering directory `/h/j/w/co/automake/tests/cscope.dir/build/sub' test -z "bar" || rm -f bar test -z "subsub/gen.c" || rm -f subsub/gen.c rm -f *.o rm -f *.tab.c test -z "" || rm -f test . = "../../sub" || test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags rm -rf ./.deps rm -f Makefile make[1]: Leaving directory `/h/j/w/co/automake/tests/cscope.dir/build/sub' Making distclean in . make[1]: Entering directory `/h/j/w/co/automake/tests/cscope.dir/build' test -z "foo" || rm -f foo rm -f elc-stamp foo.elc rm -f *.o rm -f *.tab.c test -z "" || rm -f test . = ".." || test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags rm -f cscope.out cscope.in.out cscope.po.out cscope.files make[1]: Leaving directory `/h/j/w/co/automake/tests/cscope.dir/build' rm -f config.status config.cache config.log configure.lineno config.status.lineno rm -rf ./.deps rm -f Makefile + test '!' -f cscope.files + test '!' -f cscope.out + test '!' -f cscope.in.out + test '!' -f cscope.po.out ++ pwd + /h/j/w/co/automake/tests/cscope.dir/build/../configure checking for a BSD-compatible install... /p/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /p/bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking for style of include used by make... GNU checking dependency style of gcc... gcc3 checking for g++... g++ checking whether we are using the GNU C++ compiler... yes checking whether g++ accepts -g... yes checking dependency style of g++... gcc3 checking for gfortran... no checking for g95... no checking for xlf95... no checking for f95... no checking for fort... no checking for ifort... no checking for ifc... no checking for efc... no checking for pgfortran... no checking for pgf95... no checking for lf95... no checking for ftn... no checking for nagfor... no checking for xlf90... no checking for f90... no checking for pgf90... no checking for pghpf... no checking for epcf90... no checking for g77... no checking for xlf... no checking for f77... no checking for frt... no checking for pgf77... no checking for cf77... no checking for fort77... no checking for fl32... no checking for af77... no checking whether we are using the GNU Fortran compiler... no checking whether accepts -g... no checking for gcj... no checking dependency style of gcj... none checking for emacs... emacs checking where .elc files should go... ${datarootdir}/emacs/site-lisp checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating sub/Makefile config.status: executing depfiles commands + make cscope rm -f cscope.files list='sub'; for subdir in $list; do \ test "$subdir" = . || (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make cscopelist); \ done make[1]: Entering directory `/h/j/w/co/automake/tests/cscope.dir/build/sub' /p/bin/mkdir -p subsub echo 'int generated_subsub () { return 0; }' > subsub/gen.c list='subsub/dist.c subsub/gen.c '; \ case "/h/j/w/co/automake/tests/cscope.dir/build/../sub" in \ [\\/]* | ?:[\\/]*) sdir="/h/j/w/co/automake/tests/cscope.dir/build/../sub" ;; \ *) sdir=sub//h/j/w/co/automake/tests/cscope.dir/build/../sub ;; \ esac; \ for i in $list; do \ if test -f "$i"; then \ echo "sub/$i"; \ else \ echo "$sdir/$i"; \ fi; \ done >> ../cscope.files make[1]: Leaving directory `/h/j/w/co/automake/tests/cscope.dir/build/sub' list='foo.c bar.cpp baz.f90 foo.el'; \ case "/h/j/w/co/automake/tests/cscope.dir/build/.." in \ [\\/]* | ?:[\\/]*) sdir="/h/j/w/co/automake/tests/cscope.dir/build/.." ;; \ *) sdir=.//h/j/w/co/automake/tests/cscope.dir/build/.. ;; \ esac; \ for i in $list; do \ if test -f "$i"; then \ echo "./$i"; \ else \ echo "$sdir/$i"; \ fi; \ done >> ./cscope.files test ! -s cscope.files \ || cscope -b -q -i cscope.files + cat stderr + grep 'cannot find file' stderr + make Making all in sub make[1]: Entering directory `/h/j/w/co/automake/tests/cscope.dir/build/sub' gcc -DPACKAGE_NAME=\"cscope\" -DPACKAGE_TARNAME=\"cscope\" -DPACKAGE_VERSION=\"1.0\" -DPACKAGE_STRING=\"cscope\ 1.0\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE_URL=\"\" -DPACKAGE=\"cscope\" -DVERSION=\"1.0\" -I. -I/h/j/w/co/automake/tests/cscope.dir/build/../sub -g -O2 -MT dist.o -MD -MP -MF .deps/dist.Tpo -c -o dist.o `test -f 'subsub/dist.c' || echo '/h/j/w/co/automake/tests/cscope.dir/build/../sub/'`subsub/dist.c mv -f .deps/dist.Tpo .deps/dist.Po gcc -DPACKAGE_NAME=\"cscope\" -DPACKAGE_TARNAME=\"cscope\" -DPACKAGE_VERSION=\"1.0\" -DPACKAGE_STRING=\"cscope\ 1.0\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE_URL=\"\" -DPACKAGE=\"cscope\" -DVERSION=\"1.0\" -I. -I/h/j/w/co/automake/tests/cscope.dir/build/../sub -g -O2 -MT gen.o -MD -MP -MF .deps/gen.Tpo -c -o gen.o `test -f 'subsub/gen.c' || echo '/h/j/w/co/automake/tests/cscope.dir/build/../sub/'`subsub/gen.c mv -f .deps/gen.Tpo .deps/gen.Po gcc -g -O2 -o bar dist.o gen.o make[1]: Leaving directory `/h/j/w/co/automake/tests/cscope.dir/build/sub' make[1]: Entering directory `/h/j/w/co/automake/tests/cscope.dir/build' gcc -DPACKAGE_NAME=\"cscope\" -DPACKAGE_TARNAME=\"cscope\" -DPACKAGE_VERSION=\"1.0\" -DPACKAGE_STRING=\"cscope\ 1.0\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE_URL=\"\" -DPACKAGE=\"cscope\" -DVERSION=\"1.0\" -I. -I/h/j/w/co/automake/tests/cscope.dir/build/.. -g -O2 -MT foo.o -MD -MP -MF .deps/foo.Tpo -c -o foo.o /h/j/w/co/automake/tests/cscope.dir/build/../foo.c mv -f .deps/foo.Tpo .deps/foo.Po g++ -DPACKAGE_NAME=\"cscope\" -DPACKAGE_TARNAME=\"cscope\" -DPACKAGE_VERSION=\"1.0\" -DPACKAGE_STRING=\"cscope\ 1.0\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE_URL=\"\" -DPACKAGE=\"cscope\" -DVERSION=\"1.0\" -I. -I/h/j/w/co/automake/tests/cscope.dir/build/.. -g -O2 -MT bar.o -MD -MP -MF .deps/bar.Tpo -c -o bar.o /h/j/w/co/automake/tests/cscope.dir/build/../bar.cpp mv -f .deps/bar.Tpo .deps/bar.Po c -o baz.o /h/j/w/co/automake/tests/cscope.dir/build/../baz.f90 make[1]: c: Command not found make[1]: [baz.o] Error 127 (ignored) g++ -g -O2 -o foo foo.o bar.o baz.o g++: error: baz.o: No such file or directory make[1]: *** [foo] Error 1 make[1]: Leaving directory `/h/j/w/co/automake/tests/cscope.dir/build' make: *** [all-recursive] Error 1 + Exit 77 + set +e + exit 77 + exit 77 + exit_status=77 + set +e + cd /h/j/w/co/automake/tests + case $exit_status,$keep_testdirs in + test 0 '!=' 0 + echo 'cscope: exit 77' cscope: exit 77 + exit 77 SKIP: depcomp5.test (exit: 77) ============================== /h/j/w/co/automake/tests:/opt/cov-sa-linux64-5.4.0/bin:/usr/lib64/ccache:/h/j/bin/perl:/h/j/bin:/p/p/git/bin:/p/bin:/sbin:/usr/sbin:/bin:/usr/bin:/usr/local:/usr/local/bin depcomp5: running icc -V -help ./defs: line 448: icc: command not found SKIP: depcomp10.test (exit: 77) =============================== /h/j/w/co/automake/tests:/opt/cov-sa-linux64-5.4.0/bin:/usr/lib64/ccache:/h/j/bin/perl:/h/j/bin:/p/p/git/bin:/p/bin:/sbin:/usr/sbin:/bin:/usr/bin:/usr/local:/usr/local/bin depcomp10: determine if make is GNU make GNU Make 3.82 License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html> ++ set -e ++ pwd /h/j/w/co/automake/tests/depcomp10.dir + mkdir src src/sub build + cat + cat + cat + cat + cat + cat + aclocal-1.11a -Werror + autoconf -B /no/such/dir + automake-1.11a --foreign -Werror -Wall -a configure.in:5: installing `./compile' + cd build + ../configure am_cv_CC_dependencies_compiler_type=hp checking for a BSD-compatible install... /p/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /p/bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking for style of include used by make... GNU checking dependency style of gcc... (cached) hp checking whether gcc and cc understand -c and -o together... yes checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating src/Makefile config.status: executing depfiles commands + make Making all in src make[1]: Entering directory `/h/j/w/co/automake/tests/depcomp10.dir/build/src' source='../../src/foo.c' object='foo.o' libtool=no \ DEPDIR=.deps depmode=hp /bin/sh ../../depcomp \ gcc -DPACKAGE_NAME=\"depcomp10\" -DPACKAGE_TARNAME=\"depcomp10\" -DPACKAGE_VERSION=\"1.0\" -DPACKAGE_STRING=\"depcomp10\ 1.0\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE_URL=\"\" -DPACKAGE=\"depcomp10\" -DVERSION=\"1.0\" -I. -I../../src -g -O2 -c -o foo.o ../../src/foo.c cc1: error: unrecognized command line option '-M.deps/foo.TPo' make[1]: *** [foo.o] Error 1 make[1]: Leaving directory `/h/j/w/co/automake/tests/depcomp10.dir/build/src' make: *** [all-recursive] Error 1 + Exit 77 + set +e + exit 77 + exit 77 + exit_status=77 + set +e + cd /h/j/w/co/automake/tests + case $exit_status,$keep_testdirs in + test 0 '!=' 0 + echo 'depcomp10: exit 77' depcomp10: exit 77 + exit 77 SKIP: fort4.test (exit: 77) =========================== /h/j/w/co/automake/tests:/opt/cov-sa-linux64-5.4.0/bin:/usr/lib64/ccache:/h/j/bin/perl:/h/j/bin:/p/p/git/bin:/p/bin:/sbin:/usr/sbin:/bin:/usr/bin:/usr/local:/usr/local/bin fort4: running g77 --version ./defs: line 432: g77: command not found fort4: skipped test: GNU Fortran 77 compiler not available SKIP: fort5.test (exit: 77) =========================== /h/j/w/co/automake/tests:/opt/cov-sa-linux64-5.4.0/bin:/usr/lib64/ccache:/h/j/bin/perl:/h/j/bin:/p/p/git/bin:/p/bin:/sbin:/usr/sbin:/bin:/usr/bin:/usr/local:/usr/local/bin fort5: running libtoolize --version libtoolize (GNU libtool) 2.4.2 Written by Gary V. Vaughan <gary <at> gnu.org>, 2003 Copyright (C) 2011 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. fort5: running g77 --version ./defs: line 432: g77: command not found fort5: skipped test: GNU Fortran 77 compiler not available SKIP: gcj4.test (exit: 77) ========================== /h/j/w/co/automake/tests:/opt/cov-sa-linux64-5.4.0/bin:/usr/lib64/ccache:/h/j/bin/perl:/h/j/bin:/p/p/git/bin:/p/bin:/sbin:/usr/sbin:/bin:/usr/bin:/usr/local:/usr/local/bin gcj4: running gcj --version ./defs: line 404: gcj: command not found SKIP: gcj6.test (exit: 77) ========================== /h/j/w/co/automake/tests:/opt/cov-sa-linux64-5.4.0/bin:/usr/lib64/ccache:/h/j/bin/perl:/h/j/bin:/p/p/git/bin:/p/bin:/sbin:/usr/sbin:/bin:/usr/bin:/usr/local:/usr/local/bin gcj6: running gcj --version ./defs: line 404: gcj: command not found SKIP: instdir-java.test (exit: 77) ================================== /h/j/w/co/automake/tests:/opt/cov-sa-linux64-5.4.0/bin:/usr/lib64/ccache:/h/j/bin/perl:/h/j/bin:/p/p/git/bin:/p/bin:/sbin:/usr/sbin:/bin:/usr/bin:/usr/local:/usr/local/bin instdir-java: running javac -version -help ./defs: line 456: javac: command not found instdir-java: skipped test: java compiler not found SKIP: instfail-java.test (exit: 77) =================================== /h/j/w/co/automake/tests:/opt/cov-sa-linux64-5.4.0/bin:/usr/lib64/ccache:/h/j/bin/perl:/h/j/bin:/p/p/git/bin:/p/bin:/sbin:/usr/sbin:/bin:/usr/bin:/usr/local:/usr/local/bin instfail-java: running javac -version -help ./defs: line 456: javac: command not found instfail-java: skipped test: java compiler not found SKIP: java.test (exit: 77) ========================== /h/j/w/co/automake/tests:/opt/cov-sa-linux64-5.4.0/bin:/usr/lib64/ccache:/h/j/bin/perl:/h/j/bin:/p/p/git/bin:/p/bin:/sbin:/usr/sbin:/bin:/usr/bin:/usr/local:/usr/local/bin java: running javac -version -help ./defs: line 456: javac: command not found java: skipped test: java compiler not found SKIP: java-check.test (exit: 77) ================================ /h/j/w/co/automake/tests:/opt/cov-sa-linux64-5.4.0/bin:/usr/lib64/ccache:/h/j/bin/perl:/h/j/bin:/p/p/git/bin:/p/bin:/sbin:/usr/sbin:/bin:/usr/bin:/usr/local:/usr/local/bin java-check: running javac -version -help ./defs: line 456: javac: command not found java-check: skipped test: java compiler not found SKIP: java-clean.test (exit: 77) ================================ /h/j/w/co/automake/tests:/opt/cov-sa-linux64-5.4.0/bin:/usr/lib64/ccache:/h/j/bin/perl:/h/j/bin:/p/p/git/bin:/p/bin:/sbin:/usr/sbin:/bin:/usr/bin:/usr/local:/usr/local/bin java-clean: running javac -version -help ./defs: line 456: javac: command not found java-clean: skipped test: java compiler not found SKIP: java-empty-classpath.test (exit: 77) ========================================== /h/j/w/co/automake/tests:/opt/cov-sa-linux64-5.4.0/bin:/usr/lib64/ccache:/h/j/bin/perl:/h/j/bin:/p/p/git/bin:/p/bin:/sbin:/usr/sbin:/bin:/usr/bin:/usr/local:/usr/local/bin java-empty-classpath: running javac -version -help ./defs: line 456: javac: command not found java-empty-classpath: skipped test: java compiler not found SKIP: java-extra.test (exit: 77) ================================ /h/j/w/co/automake/tests:/opt/cov-sa-linux64-5.4.0/bin:/usr/lib64/ccache:/h/j/bin/perl:/h/j/bin:/p/p/git/bin:/p/bin:/sbin:/usr/sbin:/bin:/usr/bin:/usr/local:/usr/local/bin java-extra: running javac -version -help ./defs: line 456: javac: command not found java-extra: skipped test: java compiler not found SKIP: java-noinst.test (exit: 77) ================================= /h/j/w/co/automake/tests:/opt/cov-sa-linux64-5.4.0/bin:/usr/lib64/ccache:/h/j/bin/perl:/h/j/bin:/p/p/git/bin:/p/bin:/sbin:/usr/sbin:/bin:/usr/bin:/usr/local:/usr/local/bin java-noinst: running javac -version -help ./defs: line 456: javac: command not found java-noinst: skipped test: java compiler not found SKIP: java-nobase.test (exit: 77) ================================= /h/j/w/co/automake/tests:/opt/cov-sa-linux64-5.4.0/bin:/usr/lib64/ccache:/h/j/bin/perl:/h/j/bin:/p/p/git/bin:/p/bin:/sbin:/usr/sbin:/bin:/usr/bin:/usr/local:/usr/local/bin java-nobase: running javac -version -help ./defs: line 456: javac: command not found java-nobase: skipped test: java compiler not found SKIP: java-compile-install.test (exit: 77) ========================================== /h/j/w/co/automake/tests:/opt/cov-sa-linux64-5.4.0/bin:/usr/lib64/ccache:/h/j/bin/perl:/h/j/bin:/p/p/git/bin:/p/bin:/sbin:/usr/sbin:/bin:/usr/bin:/usr/local:/usr/local/bin java-compile-install: running javac -version -help ./defs: line 456: javac: command not found java-compile-install: skipped test: java compiler not found SKIP: java-compile-run-flat.test (exit: 77) =========================================== /h/j/w/co/automake/tests:/opt/cov-sa-linux64-5.4.0/bin:/usr/lib64/ccache:/h/j/bin/perl:/h/j/bin:/p/p/git/bin:/p/bin:/sbin:/usr/sbin:/bin:/usr/bin:/usr/local:/usr/local/bin java-compile-run-flat: running java -version -help java version "1.6.0_22" OpenJDK Runtime Environment (IcedTea6 1.10.4) (fedora-61.1.10.4.fc16-x86_64) OpenJDK 64-Bit Server VM (build 20.0-b11, mixed mode) java-compile-run-flat: running javac -version -help ./defs: line 456: javac: command not found java-compile-run-flat: skipped test: java compiler not found SKIP: java-compile-run-nested.test (exit: 77) ============================================= /h/j/w/co/automake/tests:/opt/cov-sa-linux64-5.4.0/bin:/usr/lib64/ccache:/h/j/bin/perl:/h/j/bin:/p/p/git/bin:/p/bin:/sbin:/usr/sbin:/bin:/usr/bin:/usr/local:/usr/local/bin java-compile-run-nested: running java -version -help java version "1.6.0_22" OpenJDK Runtime Environment (IcedTea6 1.10.4) (fedora-61.1.10.4.fc16-x86_64) OpenJDK 64-Bit Server VM (build 20.0-b11, mixed mode) java-compile-run-nested: running javac -version -help ./defs: line 456: javac: command not found java-compile-run-nested: skipped test: java compiler not found SKIP: java-uninstall.test (exit: 77) ==================================== /h/j/w/co/automake/tests:/opt/cov-sa-linux64-5.4.0/bin:/usr/lib64/ccache:/h/j/bin/perl:/h/j/bin:/p/p/git/bin:/p/bin:/sbin:/usr/sbin:/bin:/usr/bin:/usr/local:/usr/local/bin java-uninstall: running javac -version -help ./defs: line 456: javac: command not found java-uninstall: skipped test: java compiler not found SKIP: java-rebuild.test (exit: 77) ================================== /h/j/w/co/automake/tests:/opt/cov-sa-linux64-5.4.0/bin:/usr/lib64/ccache:/h/j/bin/perl:/h/j/bin:/p/p/git/bin:/p/bin:/sbin:/usr/sbin:/bin:/usr/bin:/usr/local:/usr/local/bin java-rebuild: running javac -version -help ./defs: line 456: javac: command not found java-rebuild: skipped test: java compiler not found FAIL: lex3.test (exit: 2) ========================= /h/j/w/co/automake/tests:/opt/cov-sa-linux64-5.4.0/bin:/usr/lib64/ccache:/h/j/bin/perl:/h/j/bin:/p/p/git/bin:/p/bin:/sbin:/usr/sbin:/bin:/usr/bin:/usr/local:/usr/local/bin lex3: running gcc --version gcc (GCC) 4.7.0 20111202 (experimental) Copyright (C) 2011 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. lex3: running gcc -v Using built-in specs. COLLECT_GCC=/p/bin/gcc COLLECT_LTO_WRAPPER=/p/p/gcc-2011-12-02.12h37/libexec/gcc/x86_64-unknown-linux-gnu/4.7.0/lto-wrapper Target: x86_64-unknown-linux-gnu Configured with: /h/j/w/co/gcc-svn/configure --prefix=/p/p/gcc-2011-12-02.12h37 --disable-multilib --disable-libmudflap --disable-nls --enable-languages=c Thread model: posix gcc version 4.7.0 20111202 (experimental) (GCC) lex3: running flex --version flex 2.5.35 lex3: determine if make is GNU make GNU Make 3.82 License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html> ++ set -e ++ pwd /h/j/w/co/automake/tests/lex3.dir + CFLAGS= + export CFLAGS + cat + cat + cat + aclocal-1.11a -Werror + autoconf -B /no/such/dir + automake-1.11a --foreign -Werror -Wall -a configure.in: installing `./ylwrap' + ./configure checking for a BSD-compatible install... /p/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /p/bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking for style of include used by make... GNU checking dependency style of gcc... gcc3 checking for flex... flex checking lex output file root... lex.yy checking lex library... none needed checking whether yytext is a pointer... no checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: executing depfiles commands + make /bin/sh ./ylwrap foo.l lex.yy.c foo.c -- flex gcc -DPACKAGE_NAME=\"lex3\" -DPACKAGE_TARNAME=\"lex3\" -DPACKAGE_VERSION=\"1.0\" -DPACKAGE_STRING=\"lex3\ 1.0\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE_URL=\"\" -DPACKAGE=\"lex3\" -DVERSION=\"1.0\" -I. -MT foo.o -MD -MP -MF .deps/foo.Tpo -c -o foo.o foo.c foo.l:24:5: error: redefinition of 'yywrap' foo.l:18:5: note: previous definition of 'yywrap' was here make: *** [foo.o] Error 1 + exit_status=2 + set +e + cd /h/j/w/co/automake/tests + case $exit_status,$keep_testdirs in + test 0 '!=' 0 + echo 'lex3: exit 2' lex3: exit 2 + exit 2 SKIP: lzip.test (exit: 77) ========================== /h/j/w/co/automake/tests:/opt/cov-sa-linux64-5.4.0/bin:/usr/lib64/ccache:/h/j/bin/perl:/h/j/bin:/p/p/git/bin:/p/bin:/sbin:/usr/sbin:/bin:/usr/bin:/usr/local:/usr/local/bin lzip: running lzip --version ./defs: line 595: lzip: command not found SKIP: python-virtualenv.test (exit: 77) ======================================= /h/j/w/co/automake/tests:/opt/cov-sa-linux64-5.4.0/bin:/usr/lib64/ccache:/h/j/bin/perl:/h/j/bin:/p/p/git/bin:/p/bin:/sbin:/usr/sbin:/bin:/usr/bin:/usr/local:/usr/local/bin python-virtualenv: running python -V Python 2.7.2 python-virtualenv: running virtualenv --version ./defs: line 595: virtualenv: command not found SKIP: silentf77.test (exit: 77) =============================== /h/j/w/co/automake/tests:/opt/cov-sa-linux64-5.4.0/bin:/usr/lib64/ccache:/h/j/bin/perl:/h/j/bin:/p/p/git/bin:/p/bin:/sbin:/usr/sbin:/bin:/usr/bin:/usr/local:/usr/local/bin silentf77: running gfortran --version ./defs: line 420: gfortran: command not found silentf77: skipped test: GNU Fortran compiler not available SKIP: silentf90.test (exit: 77) =============================== /h/j/w/co/automake/tests:/opt/cov-sa-linux64-5.4.0/bin:/usr/lib64/ccache:/h/j/bin/perl:/h/j/bin:/p/p/git/bin:/p/bin:/sbin:/usr/sbin:/bin:/usr/bin:/usr/local:/usr/local/bin silentf90: running gfortran --version ./defs: line 420: gfortran: command not found silentf90: skipped test: GNU Fortran compiler not available SKIP: silent-many-gcc.test (exit: 77) ===================================== /h/j/w/co/automake/tests:/opt/cov-sa-linux64-5.4.0/bin:/usr/lib64/ccache:/h/j/bin/perl:/h/j/bin:/p/p/git/bin:/p/bin:/sbin:/usr/sbin:/bin:/usr/bin:/usr/local:/usr/local/bin silent-many-gcc: running gcc --version gcc (GCC) 4.7.0 20111202 (experimental) Copyright (C) 2011 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. silent-many-gcc: running gcc -v Using built-in specs. COLLECT_GCC=/p/bin/gcc COLLECT_LTO_WRAPPER=/p/p/gcc-2011-12-02.12h37/libexec/gcc/x86_64-unknown-linux-gnu/4.7.0/lto-wrapper Target: x86_64-unknown-linux-gnu Configured with: /h/j/w/co/gcc-svn/configure --prefix=/p/p/gcc-2011-12-02.12h37 --disable-multilib --disable-libmudflap --disable-nls --enable-languages=c Thread model: posix gcc version 4.7.0 20111202 (experimental) (GCC) silent-many-gcc: running g++ --version g++ (GCC) 4.6.2 20111027 (Red Hat 4.6.2-1) Copyright (C) 2011 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. silent-many-gcc: running g++ -v Using built-in specs. COLLECT_GCC=/usr/bin/g++ COLLECT_LTO_WRAPPER=/usr/libexec/gcc/x86_64-redhat-linux/4.6.2/lto-wrapper Target: x86_64-redhat-linux Configured with: ../configure --prefix=/usr --mandir=/usr/share/man --infodir=/usr/share/info --with-bugurl=http://bugzilla.redhat.com/bugzilla --enable-bootstrap --enable-shared --enable-threads=posix --enable-checking=release --with-system-zlib --enable-__cxa_atexit --disable-libunwind-exceptions --enable-gnu-unique-object --enable-linker-build-id --enable-languages=c,c++,objc,obj-c++,java,fortran,ada,go,lto --enable-plugin --enable-java-awt=gtk --disable-dssi --with-java-home=/usr/lib/jvm/java-1.5.0-gcj-1.5.0.0/jre --enable-libgcj-multifile --enable-java-maintainer-mode --with-ecj-jar=/usr/share/java/eclipse-ecj.jar --disable-libjava-multilib --with-ppl --with-cloog --with-tune=generic --with-arch_32=i686 --build=x86_64-redhat-linux Thread model: posix gcc version 4.6.2 20111027 (Red Hat 4.6.2-1) (GCC) silent-many-gcc: running gfortran --version ./defs: line 420: gfortran: command not found silent-many-gcc: skipped test: GNU Fortran compiler not available SKIP: silent-many-generic.test (exit: 77) ========================================= /h/j/w/co/automake/tests:/opt/cov-sa-linux64-5.4.0/bin:/usr/lib64/ccache:/h/j/bin/perl:/h/j/bin:/p/p/git/bin:/p/bin:/sbin:/usr/sbin:/bin:/usr/bin:/usr/local:/usr/local/bin silent-many-generic: running g++ --version g++ (GCC) 4.6.2 20111027 (Red Hat 4.6.2-1) Copyright (C) 2011 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. silent-many-generic: running g++ -v Using built-in specs. COLLECT_GCC=/usr/bin/g++ COLLECT_LTO_WRAPPER=/usr/libexec/gcc/x86_64-redhat-linux/4.6.2/lto-wrapper Target: x86_64-redhat-linux Configured with: ../configure --prefix=/usr --mandir=/usr/share/man --infodir=/usr/share/info --with-bugurl=http://bugzilla.redhat.com/bugzilla --enable-bootstrap --enable-shared --enable-threads=posix --enable-checking=release --with-system-zlib --enable-__cxa_atexit --disable-libunwind-exceptions --enable-gnu-unique-object --enable-linker-build-id --enable-languages=c,c++,objc,obj-c++,java,fortran,ada,go,lto --enable-plugin --enable-java-awt=gtk --disable-dssi --with-java-home=/usr/lib/jvm/java-1.5.0-gcj-1.5.0.0/jre --enable-libgcj-multifile --enable-java-maintainer-mode --with-ecj-jar=/usr/share/java/eclipse-ecj.jar --disable-libjava-multilib --with-ppl --with-cloog --with-tune=generic --with-arch_32=i686 --build=x86_64-redhat-linux Thread model: posix gcc version 4.6.2 20111027 (Red Hat 4.6.2-1) (GCC) silent-many-generic: running gfortran --version ./defs: line 420: gfortran: command not found silent-many-generic: skipped test: GNU Fortran compiler not available SKIP: upc.test (exit: 77) ========================= /h/j/w/co/automake/tests:/opt/cov-sa-linux64-5.4.0/bin:/usr/lib64/ccache:/h/j/bin/perl:/h/j/bin:/p/p/git/bin:/p/bin:/sbin:/usr/sbin:/bin:/usr/bin:/usr/local:/usr/local/bin ++ set -e ++ pwd /h/j/w/co/automake/tests/upc.dir + cat + cat + cat + aclocal-1.11a -Werror + automake-1.11a --foreign -Werror -Wall + autoconf -B /no/such/dir + ./configure checking for a BSD-compatible install... /p/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /p/bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking for style of include used by make... GNU checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking dependency style of gcc... gcc3 checking for upcc... no checking for upc... no configure: error: no Unified Parallel C compiler was found + exit_status=77 + set +e + cd /h/j/w/co/automake/tests + case $exit_status,$keep_testdirs in + test 0 '!=' 0 + echo 'upc: exit 77' upc: exit 77 + exit 77 SKIP: upc3.test (exit: 77) ========================== /h/j/w/co/automake/tests:/opt/cov-sa-linux64-5.4.0/bin:/usr/lib64/ccache:/h/j/bin/perl:/h/j/bin:/p/p/git/bin:/p/bin:/sbin:/usr/sbin:/bin:/usr/bin:/usr/local:/usr/local/bin ++ set -e ++ pwd /h/j/w/co/automake/tests/upc3.dir + cat + cat + cat + cat + cat + aclocal-1.11a -Werror + automake-1.11a --foreign -Werror -Wall + autoconf -B /no/such/dir + ./configure checking for a BSD-compatible install... /p/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /p/bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking for style of include used by make... GNU checking dependency style of gcc... gcc3 checking for upcc... no checking for upc... no configure: error: no Unified Parallel C compiler was found + exit_status=77 + set +e + cd /h/j/w/co/automake/tests + case $exit_status,$keep_testdirs in + test 0 '!=' 0 + echo 'upc3: exit 77' upc3: exit 77 + exit 77 SKIP: vala2.test (exit: 77) =========================== /h/j/w/co/automake/tests:/opt/cov-sa-linux64-5.4.0/bin:/usr/lib64/ccache:/h/j/bin/perl:/h/j/bin:/p/p/git/bin:/p/bin:/sbin:/usr/sbin:/bin:/usr/bin:/usr/local:/usr/local/bin vala2: running libtool --version libtool (GNU libtool) 2.4.2 Written by Gordon Matzigkeit <gord <at> gnu.ai.mit.edu>, 1996 Copyright (C) 2011 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. vala2: running libtoolize --version libtoolize (GNU libtool) 2.4.2 Written by Gary V. Vaughan <gary <at> gnu.org>, 2003 Copyright (C) 2011 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. vala2: running pkg-config --version 0.25 vala2: running valac --version ./defs: line 595: valac: command not found SKIP: vala3.test (exit: 77) =========================== /h/j/w/co/automake/tests:/opt/cov-sa-linux64-5.4.0/bin:/usr/lib64/ccache:/h/j/bin/perl:/h/j/bin:/p/p/git/bin:/p/bin:/sbin:/usr/sbin:/bin:/usr/bin:/usr/local:/usr/local/bin vala3: running libtool --version libtool (GNU libtool) 2.4.2 Written by Gordon Matzigkeit <gord <at> gnu.ai.mit.edu>, 1996 Copyright (C) 2011 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. vala3: running libtoolize --version libtoolize (GNU libtool) 2.4.2 Written by Gary V. Vaughan <gary <at> gnu.org>, 2003 Copyright (C) 2011 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. vala3: running pkg-config --version 0.25 vala3: running valac --version ./defs: line 595: valac: command not found SKIP: vala5.test (exit: 77) =========================== /h/j/w/co/automake/tests:/opt/cov-sa-linux64-5.4.0/bin:/usr/lib64/ccache:/h/j/bin/perl:/h/j/bin:/p/p/git/bin:/p/bin:/sbin:/usr/sbin:/bin:/usr/bin:/usr/local:/usr/local/bin vala5: running libtool --version libtool (GNU libtool) 2.4.2 Written by Gordon Matzigkeit <gord <at> gnu.ai.mit.edu>, 1996 Copyright (C) 2011 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. vala5: running libtoolize --version libtoolize (GNU libtool) 2.4.2 Written by Gary V. Vaughan <gary <at> gnu.org>, 2003 Copyright (C) 2011 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. vala5: running pkg-config --version 0.25 vala5: running valac --version ./defs: line 595: valac: command not found SKIP: vala-vpath.test (exit: 77) ================================ /h/j/w/co/automake/tests:/opt/cov-sa-linux64-5.4.0/bin:/usr/lib64/ccache:/h/j/bin/perl:/h/j/bin:/p/p/git/bin:/p/bin:/sbin:/usr/sbin:/bin:/usr/bin:/usr/local:/usr/local/bin vala-vpath: running valac --version ./defs: line 595: valac: command not found FAIL: color2-p.test (exit: 1) ============================= /h/j/w/co/automake/tests:/opt/cov-sa-linux64-5.4.0/bin:/usr/lib64/ccache:/h/j/bin/perl:/h/j/bin:/p/p/git/bin:/p/bin:/sbin:/usr/sbin:/bin:/usr/bin:/usr/local:/usr/local/bin +++ set -e +++ pwd /h/j/w/co/automake/tests/color2-p.dir ++ TERM=ansi ++ export TERM ++ red='[0;31m' ++ grn='[0;32m' ++ lgn='[1;32m' ++ blu='[1;34m' ++ std='[m' ++ case `echo "$std" | grep .` in +++ echo '[m' +++ grep . ++ set +e ++ expect -c 'exit 77' ++ test 77 -eq 77 ++ cat ++ cat ++ MAKE=make ++ expect -f expect-check spawn make stdout is a tty ++ rm -f check Makefile ++ cat ++ cat ++ cat ++ cat ++ cat ++ cp fail xfail ++ cp pass xpass ++ chmod +x pass fail skip xpass xfail ++ aclocal-1.11a -Werror ++ automake-1.11a --foreign -Werror -Wall ++ autoconf -B /no/such/dir -B /no/such/dir ++ ./configure checking for a BSD-compatible install... /p/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /p/bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile ++ cat ++ MAKE=make ++ expect -f expect-make ++ cat stdout spawn make -e check ++ test_color ++ cat stdout ++ grep ': pass' ++ /p/bin/grep -F '[0;32m' + exit_status=1 + set +e + cd /h/j/w/co/automake/tests + case $exit_status,$keep_testdirs in + test 0 '!=' 0 + echo 'color2-p: exit 1' color2-p: exit 1 + exit 1
GNU bug tracking system
Copyright (C) 1999 Darren O. Benham,
1997,2003 nCipher Corporation Ltd,
1994-97 Ian Jackson.