Subject: Re: bug#10295: 24.0.92; Python completion fails on OSX (10.6.8)

From: Leo <[email-masked]>
Date: Tue, 17 Apr 2012 21:48:45 +0800

On 2012-04-17 16:34 +0800, Andreas Schwab wrote:
> What are the tty settings in both cases?  (I see -echo, which is what
> child_setup_tty actually does.)
>
> Andreas.

`stty -a' outputs:

OSX
=====

speed 9600 baud; 48 rows; 179 columns;
lflags: icanon isig iexten echo echoe -echok echoke -echonl echoctl
	-echoprt -altwerase -noflsh -tostop -flusho pendin -nokerninfo
	-extproc
iflags: -istrip icrnl -inlcr -igncr ixon -ixoff ixany imaxbel -iutf8
	-ignbrk brkint -inpck -ignpar -parmrk
oflags: opost onlcr -oxtabs -onocr -onlret
cflags: cread cs8 -parenb -parodd hupcl -clocal -cstopb -crtscts -dsrflow
	-dtrflow -mdmbuf
cchars: discard = ^O; dsusp = ^Y; eof = ^D; eol = <undef>;
	eol2 = <undef>; erase = ^?; intr = ^C; kill = ^U; lnext = ^V;
	min = 1; quit = ^\; reprint = ^R; start = ^Q; status = ^T;
	stop = ^S; susp = ^Z; time = 0; werase = ^W;

GNU/L
=====

speed 9600 baud; rows 48; columns 179; line = 0;
intr = ^C; quit = ^\; erase = ^?; kill = ^U; eof = ^D; eol = M-^?; eol2 = M-^?; swtch = <undef>; start = ^Q; stop = ^S; susp = ^Z; rprnt = ^R; werase = ^W; lnext = ^V; flush = ^O;
min = 1; time = 0;
-parenb -parodd cs8 -hupcl -cstopb cread -clocal -crtscts
-ignbrk -brkint -ignpar -parmrk -inpck -istrip -inlcr -igncr icrnl ixon -ixoff -iuclc ixany imaxbel -iutf8
opost -olcuc -ocrnl onlcr -onocr -onlret -ofill -ofdel nl0 cr0 tab0 bs0 vt0 ff0
isig icanon iexten echo echoe -echok -echonl -noflsh -xcase -tostop -echoprt echoctl echoke