Subject: 6 test failures on Fedora 15 with latest from git
From: Jim Meyering <[email-masked]>
To: [email-masked]
Date: Fri, 22 Jul 2011 12:54:24 +0200
List-Id: <debbugs-submit.debbugs.gnu.org>

Hi,
I built the latest and ran "make check TESTSUITEFLAGS=-j20" on Fedora 15.
There were 6 failures.
I barely have time to send this, so haven't tried to analyze the failures.

==============================================
   GNU Automake 1.11a: tests/test-suite.log
==============================================

6 of 1059 tests failed.  (22 tests were not run).

.. contents:: :depth: 2

SKIP: amhello-cross-compile.test (exit: 77)
===========================================

/h/j/w/co/automake/tests:/opt/cov-sa-linux64-5.3.0/bin:/usr/lib64/ccache:/h/j/bin/perl:/h/j/bin:/p/p/git/bin:/p/bin:/sbin:/usr/sbin:/bin:/usr/bin:/usr/local:/usr/local/bin
amhello-cross-compile: running i586-mingw32msvc-gcc --version
./defs: line 486: i586-mingw32msvc-gcc: command not found

SKIP: compile4.test (exit: 77)
==============================

/h/j/w/co/automake/tests:/opt/cov-sa-linux64-5.3.0/bin:/usr/lib64/ccache:/h/j/bin/perl:/h/j/bin:/p/p/git/bin:/p/bin:/sbin:/usr/sbin:/bin:/usr/bin:/usr/local:/usr/local/bin
compile4: running cl -?
./defs: line 273: cl: command not found

SKIP: compile5.test (exit: 77)
==============================

/h/j/w/co/automake/tests:/opt/cov-sa-linux64-5.3.0/bin:/usr/lib64/ccache:/h/j/bin/perl:/h/j/bin:/p/p/git/bin:/p/bin:/sbin:/usr/sbin:/bin:/usr/bin:/usr/local:/usr/local/bin
++ set -e
++ pwd
/h/j/w/co/automake/tests/compile5.dir
+ cp /h/j/w/co/automake/lib/compile .
+ cat
+ chmod +x ./cl
+ cat
+ :
+ cat
+ aclocal-1.11a -Werror
+ autoconf
+ automake-1.11a --foreign -Werror -Wall -a
configure.in:4: installing `./config.guess'
configure.in:4: installing `./config.sub'
+ ./configure
checking for a BSD-compatible install... /p/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /p/bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking build system type... x86_64-unknown-linux-gnu
checking host system type... x86_64-unknown-linux-gnu
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating check_host
+ ./check_host
+ exit_status=77
+ set +e
+ cd /h/j/w/co/automake/tests
+ case $exit_status,$keep_testdirs in
+ test 0 '!=' 0
+ echo 'compile5: exit 77'
compile5: exit 77
+ exit 77

FAIL: cond35.test (exit: 2)
===========================

/h/j/w/co/automake/tests:/opt/cov-sa-linux64-5.3.0/bin:/usr/lib64/ccache:/h/j/bin/perl:/h/j/bin:/p/p/git/bin:/p/bin:/sbin:/usr/sbin:/bin:/usr/bin:/usr/local:/usr/local/bin
cond35: running flex --version
flex 2.5.35
cond35: running bison --version
bison (GNU Bison) 2.4.593-10e0
Written by Robert Corbett and Richard Stallman.

Copyright (C) 2011 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.  There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
cond35: running gcc --version
gcc (GCC) 4.7.0 20110708 (experimental)
Copyright (C) 2011 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.  There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

cond35: running gcc -v
Using built-in specs.
COLLECT_GCC=/p/bin/gcc
COLLECT_LTO_WRAPPER=/h/p/p/gcc-2011-07-08.18h49/bin/../libexec/gcc/x86_64-unknown-linux-gnu/4.7.0/lto-wrapper
Target: x86_64-unknown-linux-gnu
Configured with: /h/j/w/co/gcc-svn/configure --prefix=/p/p/gcc-2011-07-08.18h49 --disable-multilib --disable-libmudflap --disable-nls --enable-languages=c
Thread model: posix
gcc version 4.7.0 20110708 (experimental) (GCC)
++ set -e
++ pwd
/h/j/w/co/automake/tests/cond35.dir
+ cat
+ cat
+ aclocal-1.11a -Werror
+ autoconf
+ automake-1.11a --foreign -Werror -Wall --add-missing
configure.in: installing `./ylwrap'
++ grep tparse.h: Makefile.in
++ wc -l
+ test 1 = 1
+ cat
+ cat
+ cat
+ cp ta.c tb.c
+ ./configure
checking for a BSD-compatible install... /p/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /p/bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking for style of include used by make... GNU
checking dependency style of gcc... gcc3
checking for flex... flex
checking lex output file root... lex.yy
checking lex library... none needed
checking whether yytext is a pointer... no
checking for bison... bison -y
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: executing depfiles commands
+ make
/bin/sh ./ylwrap tparse.y y.tab.c tparse.c y.tab.h tparse.h y.output tparse.output -- bison -y -d
updating tparse.h
make  all-am
make[1]: Entering directory `/h/j/w/co/automake/tests/cond35.dir'
gcc -DPACKAGE_NAME=\"cond35\" -DPACKAGE_TARNAME=\"cond35\" -DPACKAGE_VERSION=\"1.0\" -DPACKAGE_STRING=\"cond35\ 1.0\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE_URL=\"\" -DPACKAGE=\"cond35\" -DVERSION=\"1.0\" -I.     -g -O2 -MT ta.o -MD -MP -MF .deps/ta.Tpo -c -o ta.o ta.c
mv -f .deps/ta.Tpo .deps/ta.Po
/bin/sh ./ylwrap tscan.l lex.yy.c tscan.c -- flex
gcc -DPACKAGE_NAME=\"cond35\" -DPACKAGE_TARNAME=\"cond35\" -DPACKAGE_VERSION=\"1.0\" -DPACKAGE_STRING=\"cond35\ 1.0\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE_URL=\"\" -DPACKAGE=\"cond35\" -DVERSION=\"1.0\" -I.     -g -O2 -MT tscan.o -MD -MP -MF .deps/tscan.Tpo -c -o tscan.o tscan.c
mv -f .deps/tscan.Tpo .deps/tscan.Po
gcc -DPACKAGE_NAME=\"cond35\" -DPACKAGE_TARNAME=\"cond35\" -DPACKAGE_VERSION=\"1.0\" -DPACKAGE_STRING=\"cond35\ 1.0\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE_URL=\"\" -DPACKAGE=\"cond35\" -DVERSION=\"1.0\" -I.     -g -O2 -MT tparse.o -MD -MP -MF .deps/tparse.Tpo -c -o tparse.o tparse.c
mv -f .deps/tparse.Tpo .deps/tparse.Po
gcc  -g -O2   -o ta ta.o tscan.o tparse.o
tscan.o: In function `yylex':
/h/j/w/co/automake/tests/cond35.dir/tscan.c:805: undefined reference to `yywrap'
collect2: error: ld returned 1 exit status
make[1]: *** [ta] Error 1
make[1]: Leaving directory `/h/j/w/co/automake/tests/cond35.dir'
make: *** [all] Error 2
+ exit_status=2
+ set +e
+ cd /h/j/w/co/automake/tests
+ case $exit_status,$keep_testdirs in
+ test 0 '!=' 0
+ echo 'cond35: exit 2'
cond35: exit 2
+ exit 2

SKIP: cscope.test (exit: 77)
============================

/h/j/w/co/automake/tests:/opt/cov-sa-linux64-5.3.0/bin:/usr/lib64/ccache:/h/j/bin/perl:/h/j/bin:/p/p/git/bin:/p/bin:/sbin:/usr/sbin:/bin:/usr/bin:/usr/local:/usr/local/bin
++ set -e
++ pwd
/h/j/w/co/automake/tests/cscope.dir
+ cat
+ mkdir sub sub/subsub
+ cat
+ cat
+ echo 'int foo_func () { return 0; }'
+ echo 'int main () { return 0; }'
+ cat
+ :
+ echo 'int main () { return 0; }'
+ aclocal-1.11a -Werror
+ autoconf
+ automake-1.11a --foreign -Werror -Wall --add-missing
Makefile.am:4: installing `./elisp-comp'
+ mkdir build
+ cd build
+ ../configure
checking for a BSD-compatible install... /p/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /p/bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking for style of include used by make... GNU
checking dependency style of gcc... gcc3
checking for g++... g++
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking dependency style of g++... gcc3
checking for gfortran... no
checking for g95... no
checking for xlf95... no
checking for f95... no
checking for fort... no
checking for ifort... no
checking for ifc... no
checking for efc... no
checking for pgfortran... no
checking for pgf95... no
checking for lf95... no
checking for ftn... no
checking for nagfor... no
checking for xlf90... no
checking for f90... no
checking for pgf90... no
checking for pghpf... no
checking for epcf90... no
checking for g77... no
checking for xlf... no
checking for f77... no
checking for frt... no
checking for pgf77... no
checking for cf77... no
checking for fort77... no
checking for fl32... no
checking for af77... no
checking whether we are using the GNU Fortran compiler... no
checking whether  accepts -g... no
checking for gcj... no
checking dependency style of gcj... none
checking for emacs... emacs
checking where .elc files should go... ${datarootdir}/emacs/site-lisp
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating sub/Makefile
config.status: executing depfiles commands
+ make -n cscope
rm -f cscope.files
list='sub'; for subdir in $list; do \
  test "$subdir" = . || (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make  cscopelist); \
done
make[1]: Entering directory `/h/j/w/co/automake/tests/cscope.dir/build/sub'
/p/bin/mkdir -p subsub
echo 'int generated_subsub () { return 0; }' > subsub/gen.c
list='subsub/dist.c subsub/gen.c  '; \
case "../../sub" in \
  [\\/]* | ?:[\\/]*) sdir="../../sub" ;; \
  *) sdir=sub/../../sub ;; \
esac; \
for i in $list; do \
  if test -f "$i"; then \
    echo "sub/$i"; \
  else \
    echo "$sdir/$i"; \
  fi; \
done >> ../cscope.files
make[1]: Leaving directory `/h/j/w/co/automake/tests/cscope.dir/build/sub'
list='foo.c bar.cpp baz.f90  foo.el'; \
case ".." in \
  [\\/]* | ?:[\\/]*) sdir=".." ;; \
  *) sdir=./.. ;; \
esac; \
for i in $list; do \
  if test -f "$i"; then \
    echo "./$i"; \
  else \
    echo "$sdir/$i"; \
  fi; \
done >> ./cscope.files
test ! -s cscope.files \
  || cscope -b -q   -i cscope.files
+ : cscope
+ Exit 77
+ set +e
+ exit 77
+ exit 77
+ exit_status=77
+ set +e
+ cd /h/j/w/co/automake/tests
+ case $exit_status,$keep_testdirs in
+ test 0 '!=' 0
+ echo 'cscope: exit 77'
cscope: exit 77
+ exit 77

SKIP: cscope3.test (exit: 77)
=============================

/h/j/w/co/automake/tests:/opt/cov-sa-linux64-5.3.0/bin:/usr/lib64/ccache:/h/j/bin/perl:/h/j/bin:/p/p/git/bin:/p/bin:/sbin:/usr/sbin:/bin:/usr/bin:/usr/local:/usr/local/bin
cscope3: running cscope --version </dev/null
./defs: line 278: cscope: command not found

SKIP: depcomp4.test (exit: 77)
==============================

/h/j/w/co/automake/tests:/opt/cov-sa-linux64-5.3.0/bin:/usr/lib64/ccache:/h/j/bin/perl:/h/j/bin:/p/p/git/bin:/p/bin:/sbin:/usr/sbin:/bin:/usr/bin:/usr/local:/usr/local/bin
depcomp4: running libtoolize --version
libtoolize (GNU libtool) 2.4
Written by Gary V. Vaughan <[email-masked]>, 2003

Copyright (C) 2010 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.  There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
depcomp4: running gcc --version
gcc (GCC) 4.7.0 20110708 (experimental)
Copyright (C) 2011 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.  There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

depcomp4: running gcc -v
Using built-in specs.
COLLECT_GCC=/p/bin/gcc
COLLECT_LTO_WRAPPER=/h/p/p/gcc-2011-07-08.18h49/bin/../libexec/gcc/x86_64-unknown-linux-gnu/4.7.0/lto-wrapper
Target: x86_64-unknown-linux-gnu
Configured with: /h/j/w/co/gcc-svn/configure --prefix=/p/p/gcc-2011-07-08.18h49 --disable-multilib --disable-libmudflap --disable-nls --enable-languages=c
Thread model: posix
gcc version 4.7.0 20110708 (experimental) (GCC)
depcomp4: running makedepend -f-
./defs: line 364: makedepend: command not found

SKIP: depcomp5.test (exit: 77)
==============================

/h/j/w/co/automake/tests:/opt/cov-sa-linux64-5.3.0/bin:/usr/lib64/ccache:/h/j/bin/perl:/h/j/bin:/p/p/git/bin:/p/bin:/sbin:/usr/sbin:/bin:/usr/bin:/usr/local:/usr/local/bin
depcomp5: running icc -V -help
./defs: line 352: icc: command not found

SKIP: depcomp9.test (exit: 77)
==============================

/h/j/w/co/automake/tests:/opt/cov-sa-linux64-5.3.0/bin:/usr/lib64/ccache:/h/j/bin/perl:/h/j/bin:/p/p/git/bin:/p/bin:/sbin:/usr/sbin:/bin:/usr/bin:/usr/local:/usr/local/bin
depcomp9: running makedepend -f-
./defs: line 364: makedepend: command not found

SKIP: depcomp10.test (exit: 77)
===============================

/h/j/w/co/automake/tests:/opt/cov-sa-linux64-5.3.0/bin:/usr/lib64/ccache:/h/j/bin/perl:/h/j/bin:/p/p/git/bin:/p/bin:/sbin:/usr/sbin:/bin:/usr/bin:/usr/local:/usr/local/bin
depcomp10: determine if make is GNU make
GNU Make 3.82
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
++ set -e
++ pwd
/h/j/w/co/automake/tests/depcomp10.dir
+ mkdir src src/sub build
+ cat
+ cat
+ cat
+ cat
+ cat
+ cat
+ aclocal-1.11a -Werror
+ autoconf
+ automake-1.11a --foreign -Werror -Wall -a
configure.in:5: installing `./compile'
+ cd build
+ ../configure am_cv_CC_dependencies_compiler_type=hp
checking for a BSD-compatible install... /p/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /p/bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking for style of include used by make... GNU
checking dependency style of gcc... (cached) hp
checking whether gcc and cc understand -c and -o together... yes
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating src/Makefile
config.status: executing depfiles commands
+ make
Making all in src
make[1]: Entering directory `/h/j/w/co/automake/tests/depcomp10.dir/build/src'
source='../../src/foo.c' object='foo.o' libtool=no \
DEPDIR=.deps depmode=hp /bin/sh ../../depcomp \
gcc -DPACKAGE_NAME=\"depcomp10\" -DPACKAGE_TARNAME=\"depcomp10\" -DPACKAGE_VERSION=\"1.0\" -DPACKAGE_STRING=\"depcomp10\ 1.0\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE_URL=\"\" -DPACKAGE=\"depcomp10\" -DVERSION=\"1.0\" -I. -I../../src     -g -O2 -c -o foo.o ../../src/foo.c
cc1: error: unrecognized command line option '-M.deps/foo.TPo'
make[1]: *** [foo.o] Error 1
make[1]: Leaving directory `/h/j/w/co/automake/tests/depcomp10.dir/build/src'
make: *** [all-recursive] Error 1
+ Exit 77
+ set +e
+ exit 77
+ exit 77
+ exit_status=77
+ set +e
+ cd /h/j/w/co/automake/tests
+ case $exit_status,$keep_testdirs in
+ test 0 '!=' 0
+ echo 'depcomp10: exit 77'
depcomp10: exit 77
+ exit 77

SKIP: fort4.test (exit: 77)
===========================

/h/j/w/co/automake/tests:/opt/cov-sa-linux64-5.3.0/bin:/usr/lib64/ccache:/h/j/bin/perl:/h/j/bin:/p/p/git/bin:/p/bin:/sbin:/usr/sbin:/bin:/usr/bin:/usr/local:/usr/local/bin
fort4: running g77 --version
./defs: line 336: g77: command not found
fort4: skipped test: GNU Fortran 77 compiler not available

SKIP: fort5.test (exit: 77)
===========================

/h/j/w/co/automake/tests:/opt/cov-sa-linux64-5.3.0/bin:/usr/lib64/ccache:/h/j/bin/perl:/h/j/bin:/p/p/git/bin:/p/bin:/sbin:/usr/sbin:/bin:/usr/bin:/usr/local:/usr/local/bin
fort5: running libtoolize --version
libtoolize (GNU libtool) 2.4
Written by Gary V. Vaughan <[email-masked]>, 2003

Copyright (C) 2010 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.  There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
fort5: running g77 --version
./defs: line 336: g77: command not found
fort5: skipped test: GNU Fortran 77 compiler not available

SKIP: gcj4.test (exit: 77)
==========================

/h/j/w/co/automake/tests:/opt/cov-sa-linux64-5.3.0/bin:/usr/lib64/ccache:/h/j/bin/perl:/h/j/bin:/p/p/git/bin:/p/bin:/sbin:/usr/sbin:/bin:/usr/bin:/usr/local:/usr/local/bin
gcj4: running gcj --version
./defs: line 308: gcj: command not found

SKIP: gcj6.test (exit: 77)
==========================

/h/j/w/co/automake/tests:/opt/cov-sa-linux64-5.3.0/bin:/usr/lib64/ccache:/h/j/bin/perl:/h/j/bin:/p/p/git/bin:/p/bin:/sbin:/usr/sbin:/bin:/usr/bin:/usr/local:/usr/local/bin
gcj6: running gcj --version
./defs: line 308: gcj: command not found

FAIL: lex3.test (exit: 2)
=========================

/h/j/w/co/automake/tests:/opt/cov-sa-linux64-5.3.0/bin:/usr/lib64/ccache:/h/j/bin/perl:/h/j/bin:/p/p/git/bin:/p/bin:/sbin:/usr/sbin:/bin:/usr/bin:/usr/local:/usr/local/bin
lex3: running gcc --version
gcc (GCC) 4.7.0 20110708 (experimental)
Copyright (C) 2011 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.  There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

lex3: running gcc -v
Using built-in specs.
COLLECT_GCC=/p/bin/gcc
COLLECT_LTO_WRAPPER=/h/p/p/gcc-2011-07-08.18h49/bin/../libexec/gcc/x86_64-unknown-linux-gnu/4.7.0/lto-wrapper
Target: x86_64-unknown-linux-gnu
Configured with: /h/j/w/co/gcc-svn/configure --prefix=/p/p/gcc-2011-07-08.18h49 --disable-multilib --disable-libmudflap --disable-nls --enable-languages=c
Thread model: posix
gcc version 4.7.0 20110708 (experimental) (GCC)
lex3: running flex --version
flex 2.5.35
lex3: determine if make is GNU make
GNU Make 3.82
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
++ set -e
++ pwd
/h/j/w/co/automake/tests/lex3.dir
+ CFLAGS=
+ export CFLAGS
+ cat
+ cat
+ cat
+ aclocal-1.11a -Werror
+ autoconf
+ automake-1.11a --foreign -Werror -Wall -a
configure.in: installing `./ylwrap'
+ ./configure
checking for a BSD-compatible install... /p/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /p/bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking for style of include used by make... GNU
checking dependency style of gcc... gcc3
checking for flex... flex
checking lex output file root... lex.yy
checking lex library... none needed
checking whether yytext is a pointer... no
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: executing depfiles commands
+ make
/bin/sh ./ylwrap foo.l lex.yy.c foo.c -- flex
gcc -DPACKAGE_NAME=\"lex3\" -DPACKAGE_TARNAME=\"lex3\" -DPACKAGE_VERSION=\"1.0\" -DPACKAGE_STRING=\"lex3\ 1.0\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE_URL=\"\" -DPACKAGE=\"lex3\" -DVERSION=\"1.0\" -I.      -MT foo.o -MD -MP -MF .deps/foo.Tpo -c -o foo.o foo.c
mv -f .deps/foo.Tpo .deps/foo.Po
gcc     -o foo foo.o
foo.o: In function `yylex':
foo.c:(.text+0x3d4): undefined reference to `yywrap'
foo.o: In function `input':
foo.c:(.text+0xf15): undefined reference to `yywrap'
collect2: error: ld returned 1 exit status
make: *** [foo] Error 1
+ exit_status=2
+ set +e
+ cd /h/j/w/co/automake/tests
+ case $exit_status,$keep_testdirs in
+ test 0 '!=' 0
+ echo 'lex3: exit 2'
lex3: exit 2
+ exit 2

FAIL: lexvpath.test (exit: 2)
=============================

/h/j/w/co/automake/tests:/opt/cov-sa-linux64-5.3.0/bin:/usr/lib64/ccache:/h/j/bin/perl:/h/j/bin:/p/p/git/bin:/p/bin:/sbin:/usr/sbin:/bin:/usr/bin:/usr/local:/usr/local/bin
lexvpath: running gcc --version
gcc (GCC) 4.7.0 20110708 (experimental)
Copyright (C) 2011 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.  There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

lexvpath: running gcc -v
Using built-in specs.
COLLECT_GCC=/p/bin/gcc
COLLECT_LTO_WRAPPER=/h/p/p/gcc-2011-07-08.18h49/bin/../libexec/gcc/x86_64-unknown-linux-gnu/4.7.0/lto-wrapper
Target: x86_64-unknown-linux-gnu
Configured with: /h/j/w/co/gcc-svn/configure --prefix=/p/p/gcc-2011-07-08.18h49 --disable-multilib --disable-libmudflap --disable-nls --enable-languages=c
Thread model: posix
gcc version 4.7.0 20110708 (experimental) (GCC)
lexvpath: running flex --version
flex 2.5.35
++ set -e
++ pwd
/h/j/w/co/automake/tests/lexvpath.dir
+ cat
+ cat
+ cat
+ cat
+ cat
+ aclocal-1.11a -Werror
+ autoconf
+ automake-1.11a --foreign -Werror -Wall -a
configure.in: installing `./ylwrap'
+ mkdir sub
+ cd sub
+ ../configure
checking for a BSD-compatible install... /p/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /p/bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking for style of include used by make... GNU
checking dependency style of gcc... gcc3
checking for flex... flex
checking lex output file root... lex.yy
checking lex library... none needed
checking whether yytext is a pointer... no
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating lexoutroot
config.status: executing depfiles commands
+ . ./lexoutroot
++ LEX_OUTPUT_ROOT=lex.yy
+ test -n lex.yy
+ cd ..
+ flex lexer.l
+ mv lex.yy.c lexer.c
+ cd sub
+ sleep 2
+ cat
+ make
/bin/sh ../ylwrap ../lexer.l lex.yy.c lexer.c -- flex
gcc -DPACKAGE_NAME=\"lexvpath\" -DPACKAGE_TARNAME=\"lexvpath\" -DPACKAGE_VERSION=\"1.0\" -DPACKAGE_STRING=\"lexvpath\ 1.0\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE_URL=\"\" -DPACKAGE=\"lexvpath\" -DVERSION=\"1.0\" -I. -I..     -g -O2 -MT lexer.o -MD -MP -MF .deps/lexer.Tpo -c -o lexer.o lexer.c
mv -f .deps/lexer.Tpo .deps/lexer.Po
gcc -DPACKAGE_NAME=\"lexvpath\" -DPACKAGE_TARNAME=\"lexvpath\" -DPACKAGE_VERSION=\"1.0\" -DPACKAGE_STRING=\"lexvpath\ 1.0\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE_URL=\"\" -DPACKAGE=\"lexvpath\" -DVERSION=\"1.0\" -I. -I..     -g -O2 -MT foo.o -MD -MP -MF .deps/foo.Tpo -c -o foo.o ../foo.c
mv -f .deps/foo.Tpo .deps/foo.Po
gcc  -g -O2   -o foo lexer.o foo.o
lexer.o: In function `yylex':
/h/j/w/co/automake/tests/lexvpath.dir/sub/lexer.c:812: undefined reference to `yywrap'
collect2: error: ld returned 1 exit status
make: *** [foo] Error 1
+ exit_status=2
+ set +e
+ cd /h/j/w/co/automake/tests
+ case $exit_status,$keep_testdirs in
+ test 0 '!=' 0
+ echo 'lexvpath: exit 2'
lexvpath: exit 2
+ exit 2

SKIP: lzip.test (exit: 77)
==========================

/h/j/w/co/automake/tests:/opt/cov-sa-linux64-5.3.0/bin:/usr/lib64/ccache:/h/j/bin/perl:/h/j/bin:/p/p/git/bin:/p/bin:/sbin:/usr/sbin:/bin:/usr/bin:/usr/local:/usr/local/bin
lzip: running lzip --version
./defs: line 486: lzip: command not found

SKIP: parallel-tests2.test (exit: 77)
=====================================

/h/j/w/co/automake/tests:/opt/cov-sa-linux64-5.3.0/bin:/usr/lib64/ccache:/h/j/bin/perl:/h/j/bin:/p/p/git/bin:/p/bin:/sbin:/usr/sbin:/bin:/usr/bin:/usr/local:/usr/local/bin
parallel-tests2: running rst2html --version
./defs: line 420: rst2html: command not found
parallel-tests2: running rst2html.py --version
./defs: line 420: rst2html.py: command not found
parallel-tests2: no proper rst2html program found

SKIP: python-virtualenv.test (exit: 77)
=======================================

/h/j/w/co/automake/tests:/opt/cov-sa-linux64-5.3.0/bin:/usr/lib64/ccache:/h/j/bin/perl:/h/j/bin:/p/p/git/bin:/p/bin:/sbin:/usr/sbin:/bin:/usr/bin:/usr/local:/usr/local/bin
python-virtualenv: running python -V
Python 2.7.1
python-virtualenv: running virtualenv --version
./defs: line 486: virtualenv: command not found

SKIP: silentf77.test (exit: 77)
===============================

/h/j/w/co/automake/tests:/opt/cov-sa-linux64-5.3.0/bin:/usr/lib64/ccache:/h/j/bin/perl:/h/j/bin:/p/p/git/bin:/p/bin:/sbin:/usr/sbin:/bin:/usr/bin:/usr/local:/usr/local/bin
silentf77: running gfortran --version
./defs: line 324: gfortran: command not found
silentf77: skipped test: GNU Fortran compiler not available

SKIP: silentf90.test (exit: 77)
===============================

/h/j/w/co/automake/tests:/opt/cov-sa-linux64-5.3.0/bin:/usr/lib64/ccache:/h/j/bin/perl:/h/j/bin:/p/p/git/bin:/p/bin:/sbin:/usr/sbin:/bin:/usr/bin:/usr/local:/usr/local/bin
silentf90: running gfortran --version
./defs: line 324: gfortran: command not found
silentf90: skipped test: GNU Fortran compiler not available

SKIP: silent-many-gcc.test (exit: 77)
=====================================

/h/j/w/co/automake/tests:/opt/cov-sa-linux64-5.3.0/bin:/usr/lib64/ccache:/h/j/bin/perl:/h/j/bin:/p/p/git/bin:/p/bin:/sbin:/usr/sbin:/bin:/usr/bin:/usr/local:/usr/local/bin
silent-many-gcc: running gcc --version
gcc (GCC) 4.7.0 20110708 (experimental)
Copyright (C) 2011 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.  There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

silent-many-gcc: running gcc -v
Using built-in specs.
COLLECT_GCC=/p/bin/gcc
COLLECT_LTO_WRAPPER=/h/p/p/gcc-2011-07-08.18h49/bin/../libexec/gcc/x86_64-unknown-linux-gnu/4.7.0/lto-wrapper
Target: x86_64-unknown-linux-gnu
Configured with: /h/j/w/co/gcc-svn/configure --prefix=/p/p/gcc-2011-07-08.18h49 --disable-multilib --disable-libmudflap --disable-nls --enable-languages=c
Thread model: posix
gcc version 4.7.0 20110708 (experimental) (GCC)
silent-many-gcc: running g++ --version
g++ (GCC) 4.6.0 20110530 (Red Hat 4.6.0-9)
Copyright (C) 2011 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.  There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

silent-many-gcc: running g++ -v
Using built-in specs.
COLLECT_GCC=/usr/bin/g++
COLLECT_LTO_WRAPPER=/usr/libexec/gcc/x86_64-redhat-linux/4.6.0/lto-wrapper
Target: x86_64-redhat-linux
Configured with: ../configure --prefix=/usr --mandir=/usr/share/man --infodir=/usr/share/info --with-bugurl=http://bugzilla.redhat.com/bugzilla --enable-bootstrap --enable-shared --enable-threads=posix --enable-checking=release --with-system-zlib --enable-__cxa_atexit --disable-libunwind-exceptions --enable-gnu-unique-object --enable-linker-build-id --enable-languages=c,c++,objc,obj-c++,java,fortran,ada,go,lto --enable-plugin --enable-java-awt=gtk --disable-dssi --with-java-home=/usr/lib/jvm/java-1.5.0-gcj-1.5.0.0/jre --enable-libgcj-multifile --enable-java-maintainer-mode --with-ecj-jar=/usr/share/java/eclipse-ecj.jar --disable-libjava-multilib --with-ppl --with-cloog --with-tune=generic --with-arch_32=i686 --build=x86_64-redhat-linux
Thread model: posix
gcc version 4.6.0 20110530 (Red Hat 4.6.0-9) (GCC)
silent-many-gcc: running gfortran --version
./defs: line 324: gfortran: command not found
silent-many-gcc: skipped test: GNU Fortran compiler not available

SKIP: silent-many-generic.test (exit: 77)
=========================================

/h/j/w/co/automake/tests:/opt/cov-sa-linux64-5.3.0/bin:/usr/lib64/ccache:/h/j/bin/perl:/h/j/bin:/p/p/git/bin:/p/bin:/sbin:/usr/sbin:/bin:/usr/bin:/usr/local:/usr/local/bin
silent-many-generic: running g++ --version
g++ (GCC) 4.6.0 20110530 (Red Hat 4.6.0-9)
Copyright (C) 2011 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.  There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

silent-many-generic: running g++ -v
Using built-in specs.
COLLECT_GCC=/usr/bin/g++
COLLECT_LTO_WRAPPER=/usr/libexec/gcc/x86_64-redhat-linux/4.6.0/lto-wrapper
Target: x86_64-redhat-linux
Configured with: ../configure --prefix=/usr --mandir=/usr/share/man --infodir=/usr/share/info --with-bugurl=http://bugzilla.redhat.com/bugzilla --enable-bootstrap --enable-shared --enable-threads=posix --enable-checking=release --with-system-zlib --enable-__cxa_atexit --disable-libunwind-exceptions --enable-gnu-unique-object --enable-linker-build-id --enable-languages=c,c++,objc,obj-c++,java,fortran,ada,go,lto --enable-plugin --enable-java-awt=gtk --disable-dssi --with-java-home=/usr/lib/jvm/java-1.5.0-gcj-1.5.0.0/jre --enable-libgcj-multifile --enable-java-maintainer-mode --with-ecj-jar=/usr/share/java/eclipse-ecj.jar --disable-libjava-multilib --with-ppl --with-cloog --with-tune=generic --with-arch_32=i686 --build=x86_64-redhat-linux
Thread model: posix
gcc version 4.6.0 20110530 (Red Hat 4.6.0-9) (GCC)
silent-many-generic: running gfortran --version
./defs: line 324: gfortran: command not found
silent-many-generic: skipped test: GNU Fortran compiler not available

FAIL: silent-lex-gcc.test (exit: 1)
===================================

/h/j/w/co/automake/tests:/opt/cov-sa-linux64-5.3.0/bin:/usr/lib64/ccache:/h/j/bin/perl:/h/j/bin:/p/p/git/bin:/p/bin:/sbin:/usr/sbin:/bin:/usr/bin:/usr/local:/usr/local/bin
silent-lex-gcc: running flex --version
flex 2.5.35
silent-lex-gcc: running gcc --version
gcc (GCC) 4.7.0 20110708 (experimental)
Copyright (C) 2011 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.  There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

silent-lex-gcc: running gcc -v
Using built-in specs.
COLLECT_GCC=/p/bin/gcc
COLLECT_LTO_WRAPPER=/h/p/p/gcc-2011-07-08.18h49/bin/../libexec/gcc/x86_64-unknown-linux-gnu/4.7.0/lto-wrapper
Target: x86_64-unknown-linux-gnu
Configured with: /h/j/w/co/gcc-svn/configure --prefix=/p/p/gcc-2011-07-08.18h49 --disable-multilib --disable-libmudflap --disable-nls --enable-languages=c
Thread model: posix
gcc version 4.7.0 20110708 (experimental) (GCC)
++ set -e
++ pwd
/h/j/w/co/automake/tests/silent-lex-gcc.dir
+ mkdir sub
+ cat
+ cat
+ cat
+ cat
+ cp foo.l sub/bar.l
+ aclocal-1.11a -Werror
+ automake-1.11a --foreign -Werror -Wall --add-missing
configure.in:5: installing `./compile'
configure.in: installing `./ylwrap'
+ autoconf
+ for config_args in am_cv_CC_dependencies_compiler_type=gcc
+ ./configure am_cv_CC_dependencies_compiler_type=gcc --enable-silent-rules
checking for a BSD-compatible install... /p/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /p/bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking for style of include used by make... GNU
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking dependency style of gcc... (cached) gcc
checking whether gcc and cc understand -c and -o together... yes
checking for flex... flex
checking lex output file root... lex.yy
checking lex library... none needed
checking whether yytext is a pointer... no
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating sub/Makefile
config.status: executing depfiles commands
+ make
/usr/lib/../lib64/crt1.o: In function `_start':
(.text+0x20): undefined reference to `main'
bar.o: In function `yylex':
/h/j/w/co/automake/tests/silent-lex-gcc.dir/sub/bar.c:812: undefined reference to `yywrap'
collect2: error: ld returned 1 exit status
make[1]: *** [bar1] Error 1
make: *** [all-recursive] Error 1
+ cat stdout
Making all in sub
make[1]: Entering directory `/h/j/w/co/automake/tests/silent-lex-gcc.dir/sub'
  LEX      bar.c
  CC       bar.o
  CCLD     bar1
make[1]: Leaving directory `/h/j/w/co/automake/tests/silent-lex-gcc.dir/sub'
+ Exit 1
+ set +e
+ exit 1
+ exit 1
+ exit_status=1
+ set +e
+ cd /h/j/w/co/automake/tests
+ case $exit_status,$keep_testdirs in
+ test 0 '!=' 0
+ echo 'silent-lex-gcc: exit 1'
silent-lex-gcc: exit 1
+ exit 1

FAIL: silent-lex-generic.test (exit: 1)
=======================================

/h/j/w/co/automake/tests:/opt/cov-sa-linux64-5.3.0/bin:/usr/lib64/ccache:/h/j/bin/perl:/h/j/bin:/p/p/git/bin:/p/bin:/sbin:/usr/sbin:/bin:/usr/bin:/usr/local:/usr/local/bin
silent-lex-generic: running flex --version
flex 2.5.35
++ set -e
++ pwd
/h/j/w/co/automake/tests/silent-lex-generic.dir
+ mkdir sub
+ cat
+ cat
+ cat
+ cat
+ cp foo.l sub/bar.l
+ aclocal-1.11a -Werror
+ automake-1.11a --foreign -Werror -Wall --add-missing
configure.in:5: installing `./compile'
configure.in: installing `./ylwrap'
+ autoconf
+ for config_args in --enable-dependency-tracking --disable-dependency-tracking
+ ./configure --enable-dependency-tracking --enable-silent-rules
checking for a BSD-compatible install... /p/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /p/bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking for style of include used by make... GNU
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking dependency style of gcc... gcc3
checking whether gcc and cc understand -c and -o together... yes
checking for flex... flex
checking lex output file root... lex.yy
checking lex library... none needed
checking whether yytext is a pointer... no
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating sub/Makefile
config.status: executing depfiles commands
+ make
/usr/lib/../lib64/crt1.o: In function `_start':
(.text+0x20): undefined reference to `main'
bar.o: In function `yylex':
/h/j/w/co/automake/tests/silent-lex-generic.dir/sub/bar.c:812: undefined reference to `yywrap'
collect2: error: ld returned 1 exit status
make[1]: *** [bar1] Error 1
make: *** [all-recursive] Error 1
+ cat stdout
Making all in sub
make[1]: Entering directory `/h/j/w/co/automake/tests/silent-lex-generic.dir/sub'
  LEX      bar.c
  CC       bar.o
  CCLD     bar1
make[1]: Leaving directory `/h/j/w/co/automake/tests/silent-lex-generic.dir/sub'
+ Exit 1
+ set +e
+ exit 1
+ exit 1
+ exit_status=1
+ set +e
+ cd /h/j/w/co/automake/tests
+ case $exit_status,$keep_testdirs in
+ test 0 '!=' 0
+ echo 'silent-lex-generic: exit 1'
silent-lex-generic: exit 1
+ exit 1

FAIL: txinfo21.test (exit: 1)
=============================

/h/j/w/co/automake/tests:/opt/cov-sa-linux64-5.3.0/bin:/usr/lib64/ccache:/h/j/bin/perl:/h/j/bin:/p/p/git/bin:/p/bin:/sbin:/usr/sbin:/bin:/usr/bin:/usr/local:/usr/local/bin
txinfo21: running makeinfo --html --version
makeinfo (GNU texinfo) 4.13

Copyright (C) 2008 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.
txinfo21: running texi2dvi --version
texi2dvi (GNU Texinfo 4.13) 1.135

Copyright (C) 2008 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.
++ set -e
++ pwd
/h/j/w/co/automake/tests/txinfo21.dir
+ cat
+ cat
+ cat
+ mkdir sub
+ cat
+ mkdir rec
+ cat
+ cat
+ aclocal-1.11a -Werror
+ automake-1.11a --foreign -Werror -Wall --add-missing
rec/Makefile.am:1: installing `rec/texinfo.tex'
Makefile.am:2: installing `./texinfo.tex'
+ autoconf
+ ./configure
checking for a BSD-compatible install... /p/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /p/bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating rec/Makefile
+ make
Making all in rec
make[1]: Entering directory `/h/j/w/co/automake/tests/txinfo21.dir/rec'
restore=: && backupdir=".am$$" && \
am__cwd=`pwd` && CDPATH="${ZSH_VERSION+.}:" && cd . && \
rm -rf $backupdir && mkdir $backupdir && \
if (/bin/sh /h/j/w/co/automake/tests/txinfo21.dir/missing --run makeinfo --version) >/dev/null 2>&1; then \
  for f in main3.info main3.info-[0-9] main3.info-[0-9][0-9] main3.i[0-9] main3.i[0-9][0-9]; do \
    if test -f $f; then mv $f $backupdir; restore=mv; else :; fi; \
  done; \
else :; fi && \
cd "$am__cwd"; \
if /bin/sh /h/j/w/co/automake/tests/txinfo21.dir/missing --run makeinfo   -I . \
 -o main3.info main3.texi; \
then \
  rc=0; \
  CDPATH="${ZSH_VERSION+.}:" && cd .; \
else \
  rc=$?; \
  CDPATH="${ZSH_VERSION+.}:" && cd . && \
  $restore $backupdir/* `echo "./main3.info" | sed 's|[^/]*$||'`; \
fi; \
rm -rf $backupdir; exit $rc
make[1]: Leaving directory `/h/j/w/co/automake/tests/txinfo21.dir/rec'
make[1]: Entering directory `/h/j/w/co/automake/tests/txinfo21.dir'
restore=: && backupdir=".am$$" && \
am__cwd=`pwd` && CDPATH="${ZSH_VERSION+.}:" && cd . && \
rm -rf $backupdir && mkdir $backupdir && \
if (/bin/sh /h/j/w/co/automake/tests/txinfo21.dir/missing --run makeinfo --version) >/dev/null 2>&1; then \
  for f in main.info main.info-[0-9] main.info-[0-9][0-9] main.i[0-9] main.i[0-9][0-9]; do \
    if test -f $f; then mv $f $backupdir; restore=mv; else :; fi; \
  done; \
else :; fi && \
cd "$am__cwd"; \
if /bin/sh /h/j/w/co/automake/tests/txinfo21.dir/missing --run makeinfo   -I . \
 -o main.info main.texi; \
then \
  rc=0; \
  CDPATH="${ZSH_VERSION+.}:" && cd .; \
else \
  rc=$?; \
  CDPATH="${ZSH_VERSION+.}:" && cd . && \
  $restore $backupdir/* `echo "./main.info" | sed 's|[^/]*$||'`; \
fi; \
rm -rf $backupdir; exit $rc
restore=: && backupdir=".am$$" && \
am__cwd=`pwd` && CDPATH="${ZSH_VERSION+.}:" && cd . && \
rm -rf $backupdir && mkdir $backupdir && \
if (/bin/sh /h/j/w/co/automake/tests/txinfo21.dir/missing --run makeinfo --version) >/dev/null 2>&1; then \
  for f in sub/main2.info sub/main2.info-[0-9] sub/main2.info-[0-9][0-9] sub/main2.i[0-9] sub/main2.i[0-9][0-9]; do \
    if test -f $f; then mv $f $backupdir; restore=mv; else :; fi; \
  done; \
else :; fi && \
cd "$am__cwd"; \
if /bin/sh /h/j/w/co/automake/tests/txinfo21.dir/missing --run makeinfo   -I sub -I ./sub \
 -o sub/main2.info ./sub/main2.texi; \
then \
  rc=0; \
  CDPATH="${ZSH_VERSION+.}:" && cd .; \
else \
  rc=$?; \
  CDPATH="${ZSH_VERSION+.}:" && cd . && \
  $restore $backupdir/* `echo "./sub/main2.info" | sed 's|[^/]*$||'`; \
fi; \
rm -rf $backupdir; exit $rc
make[1]: Leaving directory `/h/j/w/co/automake/tests/txinfo21.dir'
+ sleep 2
+ make html
Making html in rec
make[1]: Entering directory `/h/j/w/co/automake/tests/txinfo21.dir/rec'
rm -rf main3.htp
if /bin/sh /h/j/w/co/automake/tests/txinfo21.dir/missing --run makeinfo --html   -I . \
 -o main3.htp main3.texi; \
then \
  rm -rf main3.html; \
  if test ! -d main3.htp && test -d main3; then \
    mv main3 main3.html; else mv main3.htp main3.html; fi; \
else \
  if test ! -d main3.htp && test -d main3; then \
    rm -rf main3; else rm -Rf main3.htp main3.html; fi; \
  exit 1; \
fi
make[1]: Leaving directory `/h/j/w/co/automake/tests/txinfo21.dir/rec'
make[1]: Entering directory `/h/j/w/co/automake/tests/txinfo21.dir'
rm -rf main.htp
if /bin/sh /h/j/w/co/automake/tests/txinfo21.dir/missing --run makeinfo --html   -I . \
 -o main.htp main.texi; \
then \
  rm -rf main.html; \
  if test ! -d main.htp && test -d main; then \
    mv main main.html; else mv main.htp main.html; fi; \
else \
  if test ! -d main.htp && test -d main; then \
    rm -rf main; else rm -Rf main.htp main.html; fi; \
  exit 1; \
fi
rm -rf sub/main2.htp
if /bin/sh /h/j/w/co/automake/tests/txinfo21.dir/missing --run makeinfo --html   -I sub -I ./sub \
 -o sub/main2.htp `test -f 'sub/main2.texi' || echo './'`sub/main2.texi; \
then \
  rm -rf sub/main2.html; \
  if test ! -d sub/main2.htp && test -d sub/main2; then \
    mv sub/main2 sub/main2.html; else mv sub/main2.htp sub/main2.html; fi; \
else \
  if test ! -d sub/main2.htp && test -d sub/main2; then \
    rm -rf sub/main2; else rm -Rf sub/main2.htp sub/main2.html; fi; \
  exit 1; \
fi
make[1]: Leaving directory `/h/j/w/co/automake/tests/txinfo21.dir'
+ test -d main.html
+ test -d sub/main2.html
+ test -d rec/main3.html
+ is_newest main.html main.texi
++ find main.html main.texi -newer main.html
+ is_newest_files=main.html/index.html
+ test -z main.html/index.html
+ exit_status=1
+ set +e
+ cd /h/j/w/co/automake/tests
+ case $exit_status,$keep_testdirs in
+ test 0 '!=' 0
+ echo 'txinfo21: exit 1'
txinfo21: exit 1
+ exit 1

SKIP: upc.test (exit: 77)
=========================

/h/j/w/co/automake/tests:/opt/cov-sa-linux64-5.3.0/bin:/usr/lib64/ccache:/h/j/bin/perl:/h/j/bin:/p/p/git/bin:/p/bin:/sbin:/usr/sbin:/bin:/usr/bin:/usr/local:/usr/local/bin
++ set -e
++ pwd
/h/j/w/co/automake/tests/upc.dir
+ cat
+ cat
+ cat
+ aclocal-1.11a -Werror
+ automake-1.11a --foreign -Werror -Wall
+ autoconf
+ ./configure
checking for a BSD-compatible install... /p/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /p/bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking for style of include used by make... GNU
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking dependency style of gcc... gcc3
checking for upcc... no
checking for upc... no
configure: error: no Unified Parallel C compiler was found
+ exit_status=77
+ set +e
+ cd /h/j/w/co/automake/tests
+ case $exit_status,$keep_testdirs in
+ test 0 '!=' 0
+ echo 'upc: exit 77'
upc: exit 77
+ exit 77

SKIP: upc3.test (exit: 77)
==========================

/h/j/w/co/automake/tests:/opt/cov-sa-linux64-5.3.0/bin:/usr/lib64/ccache:/h/j/bin/perl:/h/j/bin:/p/p/git/bin:/p/bin:/sbin:/usr/sbin:/bin:/usr/bin:/usr/local:/usr/local/bin
++ set -e
++ pwd
/h/j/w/co/automake/tests/upc3.dir
+ cat
+ cat
+ cat
+ cat
+ cat
+ aclocal-1.11a -Werror
+ automake-1.11a --foreign -Werror -Wall
+ autoconf
+ ./configure
checking for a BSD-compatible install... /p/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /p/bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking for style of include used by make... GNU
checking dependency style of gcc... gcc3
checking for upcc... no
checking for upc... no
configure: error: no Unified Parallel C compiler was found
+ exit_status=77
+ set +e
+ cd /h/j/w/co/automake/tests
+ case $exit_status,$keep_testdirs in
+ test 0 '!=' 0
+ echo 'upc3: exit 77'
upc3: exit 77
+ exit 77