I think that df may support Korean characters because gls supports Korean
characters without any modification of settings.

The results of the commands you requested are as below:

Mini:~$ LC_ALL=en_US.UTF-8 df -h
Filesystem      Size  Used Avail Use% Mounted on
/dev/disk0s2    233G  177G   55G  77% /
/dev/disk1s2    931G  686G  245G  74% /Volumes/ext
/dev/disk2s1     39M   33M  6.4M  84% /Volumes/BEAGLEBONE
/dev/disk3s1     15G  2.5M   15G   1% /Volumes/�??�?��??�?�

Mini:~$ LC_ALL=C df -h
Filesystem      Size  Used Avail Use% Mounted on
/dev/disk0s2    233G  177G   55G  77% /
/dev/disk1s2    931G  686G  245G  74% /Volumes/ext
/dev/disk2s1     39M   33M  6.4M  84% /Volumes/BEAGLEBONE
/dev/disk3s1     15G  2.5M   15G   1% /Volumes/무제

Mini:~$ LC_ALL=ko_KR.UTF-8 locale
LANG="ko_KR.UTF-8"
LC_COLLATE="ko_KR.UTF-8"
LC_CTYPE="ko_KR.UTF-8"
LC_MESSAGES="ko_KR.UTF-8"
LC_MONETARY="ko_KR.UTF-8"
LC_NUMERIC="ko_KR.UTF-8"
LC_TIME="ko_KR.UTF-8"
LC_ALL="ko_KR.UTF-8"

LC_ALL=C makes it work well.
By the way, why does gls work well without LC_ALL setting?

Regards,
Jaeseok


2017-02-08 12:52 GMT+09:00 Pádraig Brady <P@draigbrady.com>:

> On 07/02/17 17:30, Jaeseok Park wrote:
> > 2017-02-08 1:04 GMT+09:00 Pádraig Brady <P@draigbrady.com <mailto:
> P@draigbrady.com>>:
> >
> >     On 07/02/17 05:11, Jaeseok Park wrote:
> >     > Dear Pádraig
> >     >
> >     > Thank you for your reply.
> >     >
> >     > 1. Maybe its volume name seems to be encoded by UTF-8. I formatted
> my USB storage on OSX.
> >     >
> >     > 2. My $LC_ALL is empty and $LANG is "ko_KR.UTF-8".
> >     >
> >     > 3. The result of gls is as below:
> >     >
> >     > BEAGLEBONE
> >     > boot.tar
> >     > ext
> >     > ssd
> >     > ''$'\341\204\206\341\205\256\341\204\214\341\205\246'
> >
> >     Ah right that's the decomposed form.
> >     HFS must use that for normalization of file names.
> >     Using that I can reproduce your issue with an incorrect locale:
> >
> >     # LC_ALL=ko_KR df -h
> >     Filesystem      Size  Used Avail Use% Mounted on
> >     /dev/sda1       100M  120K  100M   1% /root/�??�?��??�?�
> >     # LC_ALL=ko_KR.UTF-8 df -h
> >     Filesystem      Size  Used Avail Use% Mounted on
> >     /dev/sda1       100M  120K  100M   1% /root/무제
> >
> >
> >     I.E. It looks like you have the wrong locale settings for the df
> command.
> >     Please try setting LC_ALL as above, or otherwise setting UTF-8.
>
> > I tried to execute the commands as you guided me, however the result is
> the same.
> >
> > Mini:~$ LC_ALL=ko_KR df -h
> > Filesystem      Size  Used Avail Use% Mounted on
> > /dev/disk0s2    233G  176G   56G  76% /
> > /dev/disk1s2    931G  686G  246G  74% /Volumes/ext
> > /dev/disk2s1     39M   33M  6.4M  84% /Volumes/BEAGLEBONE
> > /dev/disk3s1     15G  2.5M   15G   1% /Volumes/�??�?��??�?�
> >
> > Mini:~$ LC_ALL=ko_KR.UTF-8 df -h
> > Filesystem      Size  Used Avail Use% Mounted on
> > /dev/disk0s2    233G  176G   56G  76% /
> > /dev/disk1s2    931G  686G  246G  74% /Volumes/ext
> > /dev/disk2s1     39M   33M  6.4M  84% /Volumes/BEAGLEBONE
> > /dev/disk3s1     15G  2.5M   15G   1% /Volumes/�??�?��??�?�
> >
> > Mini:~$ gls /Volumes/
> > BEAGLEBONE  boot.tar  ext  ssd무제
> >
> > Did I do wrong something?
> >
> > Regards,
> > Jaeseok
> >
> >
>
> I don't have access to OSX to try out things,
> but I suspect ko_KR.UTF-8 may not be supported on your system?
> Can you try instead with LC_ALL=en_US.UTF-8 or LC_ALL=C,
> both of which display correctly on Fedora Linux here.
>
> Also what's the output from:
>
>   LC_ALL=ko_KR.UTF-8 locale
>
> If that suggests ko_KR.UTF-8 is supported,
> then I'll need to get access to an OSX system to debug.
> Perhaps there is some shennanigans with the returned charset on OSX.
>
> thanks,
> Pádraig
>



-- 
--------------------------

*"Good People, Valuable Challenge, Better World"*

Jaeseok Park | Daliworks Inc.

Mobile : +82-10-5759-5853

Office : +82-02-2274-3254
----------------------------